1. Introduction
Thank you for choosing the Eigotrav box12 Jump Starter Power Bank with 150PSI Air Compressor. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure safe and optimal operation.
Be prepared for long journeys and make your trip more comfortable!
Video: Overview of Eigotrav box12 features and usage.
2. Package Contents
Please check the package for the following items:
- Eigotrav box12 Jump Starter Power Bank with Air Compressor
- Smart Jumper Cables (Red and Black clamps)
- Air Hose
- Various Nozzles (for cars, motorcycles, bicycles, balls, mattresses)
- USB-C Charging Cable
- Carrying Case
Figure 2.1: Eigotrav box12 Jump Starter with included accessories.
3. Product Overview
Familiarize yourself with the components of your Eigotrav box12:
Figure 3.1: Eigotrav box12 Labeled Parts
- USB Output Port
- Charging Input Port (Type-C)
- LED Illumination Light
- LED Illumination Button
- Car Start Output Port
- Power Button
- Display Screen
- Pre-set Pressure + Button
- Pre-set Pressure - Button
- Scene Switch Button
- Unit Switch Button
- Air Outlet
4. Charging the Device
Before first use, fully charge the Eigotrav box12. It supports QC 3.0 fast charging via its Type-C input port.
- Connect the provided USB-C charging cable to the Charging Input Port (2) on the device.
- Connect the other end of the USB-C cable to a suitable USB wall adapter (not included).
- The display screen (7) will indicate the charging status.
- Charge until the battery indicator shows full.
Figure 4.1: Charging the Eigotrav box12.
5. Jump Starting a Vehicle
The Eigotrav box12 can provide a 6000A peak current, suitable for up to 7.5L gasoline and 6.0L diesel engines.
- Ensure the Eigotrav box12 is sufficiently charged (at least 50% recommended).
- Connect the smart jumper cables to the Car Start Output Port (5) on the device.
- Attach the red (+) clamp to the positive terminal of the vehicle's dead battery.
- Attach the black (-) clamp to the negative terminal of the vehicle's dead battery.
- If the smart jumper cable indicator shows a reverse red light, disconnect and re-attach correctly.
- Start the vehicle's engine.
- Once the vehicle starts, immediately remove the jumper cables from the battery, then disconnect from the Eigotrav box12.
Figure 5.1: Jump starting a vehicle.
Figure 5.2: Jump Starter capabilities.
6. Tire Inflation (Air Compressor)
The built-in 150PSI digital air compressor can inflate a common car tire to 20PSI in approximately 2 minutes.
- Screw the air hose onto the Air Outlet (12) of the device.
- Attach the appropriate nozzle to the other end of the air hose and connect it to the tire valve or inflatable item.
- Press the Power Button (6) to turn on the device. The display screen (7) will show the current pressure.
- Use the Pre-set Pressure + Button (8) and Pre-set Pressure - Button (9) to set the desired pressure.
- Press the Scene Switch Button (10) to cycle through different modes (e.g., car, motorcycle, bicycle, ball).
- Press the Power Button (6) again to start inflation.
- The compressor will automatically stop once the pre-set pressure is reached.
- Disconnect the hose and nozzle.
Figure 6.1: Inflating a car tire with the Eigotrav box12.
Figure 6.2: One-key inflation and automatic stop.
Figure 6.3: Tire pressure monitoring for safety.
7. Using as a Power Bank
The Eigotrav box12 features a 12000mAh (3.7V) battery capacity and includes USB and Type-C output ports for charging your electronic devices.
- Connect your device's charging cable to the USB Output Port (1) or the Type-C port (which also serves as charging input).
- The Eigotrav box12 will automatically begin charging your device.
- Monitor the battery level on the display screen (7).
Figure 7.1: Charging a smartphone with the Eigotrav box12.
8. LED Flashlight Function
The device is equipped with a 120 lumens, 1W LED light, capable of illuminating up to 50 meters, offering Lighting, SOS, and Strobe modes.
- Press the LED Illumination Button (4) once to turn on the LED Illumination Light (3).
- Press the button again to cycle through different modes (Lighting > SOS > Strobe).
- Press and hold the button to turn off the flashlight.
Figure 8.1: Using the LED flashlight.
9. Intelligent Protection System
The Eigotrav box12 prioritizes safety with an intelligent protection system that includes:
- Spark-Proof Protection
- Overload Protection
- Reverse Charge Protection
- Overcharge Protection
- Reverse Polarity Protection
- Overvoltage Protection
- AI Software Monitoring
- Short Circuit Protection
- Overcurrent Protection
- High and Low-Temperature Protection
Figure 9.1: Intelligent Protection System.
10. Specifications
| Feature | Specification |
|---|---|
| Model | box12 |
| Peak Current | 6000A |
| Engine Compatibility (Gas) | Up to 7.5L |
| Engine Compatibility (Diesel) | Up to 6.0L |
| Air Compressor Pressure | 150PSI |
| Inflation Time (Car tire to 20PSI) | Approx. 2 minutes |
| Battery Capacity | 12000mAh (3.7V) |
| Charging Input | Type-C (QC 3.0 Fast Charging) |
| Output Ports | USB, Type-C |
| LED Flashlight Brightness | 120 Lumens, 1W |
| LED Flashlight Range | Up to 50 meters |
| Dimensions (L x W x H) | 23 cm x 14 cm x 11 cm |
| Weight | 1.5 kg |
| Electric | Yes |
| Type | Pocket, Multi Tools |
11. Troubleshooting
- Device not turning on: Ensure the device is fully charged. Press and hold the Power Button (6) for a few seconds.
- Jump starter not working: Check that the smart jumper cables are correctly connected to the device and the car battery terminals (red to positive, black to negative). Ensure the device has sufficient charge.
- Air compressor not inflating: Verify the air hose and nozzle are securely attached. Check that the desired pressure is set and the compressor is turned on. Ensure the device has sufficient charge.
- Charging slow: Use a QC 3.0 compatible wall adapter for optimal charging speed.
12. User Tips
- Always keep the device charged, especially before long trips, to ensure it's ready for emergencies.
- Store the device in its carrying case to protect it from dust and damage.
- Regularly check tire pressure, and use the Eigotrav box12 to maintain optimal levels for safety and fuel efficiency.
- In cold weather, ensure the device is kept in a relatively warm environment to maintain battery performance.
13. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, charge the device every 3-6 months to prolong battery life.
- Battery Care: Avoid fully discharging the battery frequently. Charge it when the battery level is low.
14. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.
