1. Introduction
Thank you for choosing the LEKATO TANK-B Bass Multi Effects Pedal. This versatile processor is designed to enhance your bass playing experience with a wide range of effects, editable modules, and convenient connectivity options. This manual provides detailed instructions for setup, operation, and maintenance to help you get the most out of your device.
2. Safety Information
Please read all instructions carefully before use to ensure safe operation and prevent damage. Keep this manual for future reference.
General Safety Warnings:
- Children: Keep the device and its cord out of reach of children under 3 years old. In case of ingestion, seek medical attention immediately.
- Environment: Do not use or store this apparatus near water, heat sources (radiators, heat registers, stoves, amplifiers), or in damp, dusty areas. Avoid violent vibrations or shock.
- Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Cleaning: Clean only with a dry cloth. Do not use alcohol or other cleaning fluids.
- Power: Protect the power cord from being walked on or pinched. Unplug the apparatus during lightning storms or when unused for long periods.
- Servicing: Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged, such as the power supply cord or plug being damaged, liquid spilled, objects fallen into the apparatus, exposure to rain or moisture, or if it does not operate normally or has been dropped.
- Earthing: The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Disconnect Device: Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Lithium Battery Caution:
- Do not disassemble or repair the product yourself.
- If only one power indicator is flickering during use, indicating low battery, charge it in time to prevent affecting transmission distance and quality.
- Turn off the device when not in use.
- Due to the nature of lithium batteries, a slight self-discharge occurs. Charge the battery every 2 months to avoid low battery protection.
- The lithium battery capacity decreases gradually after repeated charge and discharge, affecting the product's lifespan.
CE Conformity:
This product conforms with all applicable European Union regulations. The "Conformité Européenne" (CE) marking confirms that the product meets essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares compliance with all legal requirements for CE marking and allows the product to be placed on the market throughout the European Economic Area.
3. Product Overview
The LEKATO TANK-B is a compact and robust bass multi-effects pedal made of premium alloy aluminum, designed for both live performance and studio use.
Key Features:
- Presets: 36 factory presets, with the ability to customize and save your preferred tones.
- Modules: 9 effect modules including NOISE GATE, Compressor, 9 AMP models, 3 MOD effects (Chorus, Phaser, Pitch), 3 Space effects (Delay, Reverb, Space Time), and 8 IR CAB simulations.
- Modes: Supports 2 operational modes (Live/Preset).
- Editing: On-board knobs for direct control, plus a dedicated app for PC or phone for advanced editing, preset exchange, sharing, import/export, and IR loading/deletion.
- Connectivity:
- 3.5mm Headphone Jack for silent practice.
- MONO Input and Output.
- AUX IN for Phone Recording.
- USB port for charging, data transmission, and PC recording.
- XLR Output.
- Bluetooth for audio streaming (playing backing tracks).
- Power: Built-in 3000mAh rechargeable Lithium-Ion battery providing up to 12 hours of playtime.
Control Layout:


The pedal features multiple knobs for each effect module (SPACE, MOD, AMP, COMP) allowing for detailed tone shaping. Footswitches are used for bank navigation and special functions:
- BANK - (Left Footswitch): Decreases the current bank number.
- BANK + (Right Footswitch): Increases the current bank number.
- Press A+B: Page Up (for preset navigation).
- Press B+C: Toggles between Preset/Live mode. Press and Hold for Tuner or Bluetooth function.
- Press C+D: Page Down (for preset navigation).
Interfaces:

- IN (MONO Input): Connect your bass guitar here.
- AUX IN (PHONE RECORD): Connect your mobile device for recording.
- Earphone (3.5mm Headphone Jack): For silent practice.
- OUT (MONO Output): Connect to an amplifier or audio interface.
- USB: For charging the internal battery, data transmission, and PC recording.
- XLR OUT: Balanced output for direct connection to mixing consoles or audio interfaces.
4. Setup
4.1 Initial Charging
Before first use, ensure the pedal is fully charged. Connect the pedal to a 5V USB power source using the provided USB cable. The charging indicator will show the charging status.
4.2 Basic Connections
- Connect your bass guitar to the IN jack using a standard 1/4-inch instrument cable.
- Connect the OUT jack to your bass amplifier or audio interface using a 1/4-inch instrument cable.
- For balanced output, connect the XLR OUT to a mixing console or audio interface.
- For silent practice, plug headphones into the Earphone (3.5mm) jack.

4.3 Powering On/Off
Locate the ON/OFF switch on the side of the pedal. Flip the switch to the "ON" position to power on the device. Flip to "OFF" when not in use to conserve battery.
5. Operation
5.1 Navigating Presets
The TANK-B pedal comes with 36 factory presets. Use the BANK - and BANK + footswitches to cycle through different banks of presets. The central display shows the current preset number.
- Page Up: Press footswitches A and B simultaneously.
- Page Down: Press footswitches C and D simultaneously.
5.2 Editing Tones and Saving
Each effect module (SPACE, MOD, AMP, COMP) has dedicated knobs for adjusting parameters. Turn these knobs to customize your sound. To save your customized tone:
- Adjust the desired parameters using the knobs.
- The pedal allows you to overwrite existing presets. Consult the app or full user manual for specific saving procedures.

5.3 Effect Modules Overview

The pedal integrates 6 effect modules in a common order for intuitive adjustment:
- IR CAB: 8 Impulse Response cabinet simulations.
- SPACE: 3 Space effects (Delay, Reverb, Space Time).
- MOD: 3 Modulation effects (Chorus, Phaser, Pitch).
- AMP: 9 Amplifier models.
- COMP: Compressor.
- NS GATE: Noise Gate.
- TUNER: Built-in tuner.
Note: When a knob for a module is set to the middle position between two processes, that module will turn off. This is indicated if the two knob lights for that module are off.
5.4 App for Editing and IR Loading
The LEKATO TANK-B features a dedicated app for PC and mobile devices, offering advanced control and customization:
- Editing: Fine-tune parameters beyond the physical knobs.
- Preset Management: Exchange, share, import, and export presets.
- IR Loading: Load or delete Impulse Response files. The pedal comes with 8 factory IRs that can be overwritten with third-party files and restored via the app.

5.5 Bluetooth Connectivity
The pedal supports Bluetooth audio streaming, allowing you to play backing tracks from your mobile device for practice or performance.
- Activate Bluetooth on your mobile device.
- On the TANK-B pedal, press and hold the B+C footswitches to activate Bluetooth pairing mode.
- Select "TANK-B" from your device's Bluetooth list to connect.
- Once connected, audio played on your device will stream through the pedal's output.

5.6 Tuner Function
To access the built-in tuner, press and hold the B+C footswitches. The display will show tuning information. Strum a string, and the display will indicate if it's sharp, flat, or in tune.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the pedal's surface. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the finish and internal components.
- Storage: When not in use for extended periods, store the pedal in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: As mentioned in safety, charge the internal lithium battery every 2 months to prevent deep discharge and prolong its lifespan.
- Firmware Updates: Periodically check the LEKATO website or app for any available firmware updates to ensure optimal performance and access to new features.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output. |
|
|
| Poor sound quality / Noise. |
|
|
| Bluetooth not connecting. |
|
|
| App not recognizing pedal. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | LEKATO |
| Model | TANK-B |
| Presets | 36 (customizable) |
| Effect Modules | NOISE GATE, Compressor, 9 AMP, 3 MOD (Chorus, Phaser, Pitch), 3 Space effects, 8 IR CAB, Tuner |
| Battery | 1 x 3000mAh Lithium Ion (rechargeable, included) |
| Playtime | Up to 12 hours |
| Connectivity | MONO In/Out, AUX In, 3.5mm Headphone, USB, XLR Out, Bluetooth |
| Material | Premium Alloy Aluminum |
| Dimensions (L x W x H) | 12.2 x 2.52 x 1.18 inches (approx. 31 x 6.4 x 3 cm) |
| Weight | 1.47 pounds (approx. 0.67 kg) |


9. User Tips
- Octaver Effect: For users looking for an octaver effect, explore the "Pitch" option within the MOD module. This can provide octave-down or octave-up sounds for your bass.
- App Customization: Don't hesitate to use the dedicated app for deeper customization. It offers more precise control over parameters and allows for easy management of your presets and IRs.
- Silent Practice: Utilize the 3.5mm headphone jack for late-night practice sessions without disturbing others.
- Experiment with IRs: The ability to load third-party IRs significantly expands the tonal possibilities. Experiment with different cabinet simulations to find your unique sound.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact LEKATO Official Store directly or visit their official website. Keep your purchase receipt as proof of purchase.
LEKATO Official Store: Visit Store