Introduction
The EDIAG YA101 is a basic, plug-and-play OBDII/EOBD code reader designed for quick and efficient vehicle diagnostics. It provides comprehensive OBDII functions, allowing users to read and clear diagnostic trouble codes (DTCs), view live data, perform O2 sensor tests, and more. Equipped with a 1.8-inch color screen and multi-language support, it is suitable for both basic mechanics and DIY users.
Key Features
- 1.8-inch TFT Color Screen: Displays diagnostic information clearly with 160*128dpi resolution.
- Full OBDII/EOBD Functions: Supports all 10 OBD2 modes, including reading and clearing DTCs, I/M readiness status, reading freeze frame data, live data stream, O2 sensor test, on-board monitor test (Mode 6), and vehicle information.
- Multi-Language Support: Available in English, French, Russian, Spanish, German, Italian, Portuguese, Japanese, and Chinese.
- Lifetime Free Update: Software can be updated via the internet anytime, anywhere, ensuring compatibility with the latest car models.
- Plug-and-Play Design: Easy to use with no batteries required; powered directly through the OBDII cable.
- Durable Construction: Features silicone physical buttons for high durability, thick wires (up to 80 cm), a non-slip textured design, and a new OBDII connector for easy plug-in and out.
- Battery Test Function: Provides voltage test results for reference.

Package Contents
The EDIAG YA101 OBDII/EOBD Code Reader package typically includes:
- EDIAG YA101 Main Unit with integrated OBDII Cable
- Quick Start Guide / User Manual
- USB Cable (for updates)

Setup
- Locate the OBDII Port: The OBDII port is usually located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot find it.
- Connect the Scanner: Plug the EDIAG YA101's OBDII connector firmly into the vehicle's OBDII port. The scanner will power on automatically.
- Initial Language Selection: Upon first use, or after a reset, you may be prompted to select your preferred language. Use the navigation buttons (Up/Down arrows) to select and the OK button to confirm.


Operating Instructions
The EDIAG YA101 features a simple interface with four navigation buttons and an OK/Return button for menu selection and navigation.
Navigation
- Up/Down Arrows: Scroll through menu options.
- OK Button: Confirm selection or enter a submenu.
- Return Button: Go back to the previous screen or exit a function.

Diagnostic Functions
From the main menu, select 'Diagnostic' to access the following functions:
- Read Codes: Displays current, pending, and permanent Diagnostic Trouble Codes (DTCs).
- Erase Codes: Clears DTCs from the vehicle's computer and turns off the Malfunction Indicator Light (MIL). Ensure the issue causing the code is resolved before clearing.
- Live Data: Displays real-time data from the vehicle's sensors, such as engine RPM, vehicle speed, oxygen sensor readings, etc.
- Freeze Frame: Shows a snapshot of sensor data at the moment a fault code was set, aiding in diagnosis.
- I/M Readiness: Checks the status of emission-related monitoring systems to determine if they are ready for an emissions test.
- O2 Sensor Test: Retrieves O2 sensor monitor test results for the most recently completed tests.
- On-Board Monitor Test (Mode 6): Retrieves test results for emission-related powertrain components and systems that are not continuously monitored.
- Vehicle Information (VIN Info): Displays the Vehicle Identification Number (VIN), Calibration ID (CALID), and Calibration Verification Number (CVN).
- DTC Lookup: Provides definitions for generic and manufacturer-specific diagnostic trouble codes.
Voltage Test (Battery Test)
Select 'Voltage Test' from the main menu to check the vehicle's battery voltage. This provides a quick reference for battery status.


Maintenance
Software Updates
The EDIAG YA101 offers lifetime free software updates to ensure compatibility with new vehicle models and to improve functionality. To update the software:
- Connect the YA101 to a computer using the provided USB cable.
- Visit the official EDIAG website (or YAWOA.COM as indicated on the device's 'About' screen) to download the latest update software and instructions.
- Follow the on-screen instructions provided by the update software to complete the process.

Cleaning and Storage
- Clean the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Store the device in a dry, cool place, away from direct sunlight and extreme temperatures.
- Keep the OBDII connector clean and free of debris.
Troubleshooting
- Device does not power on: Ensure the OBDII connector is securely plugged into the vehicle's OBDII port. Check the vehicle's battery for sufficient voltage (9-18V).
- Link error/Communication error: Verify that the ignition is in the ON position (engine off or running, depending on the test). Ensure the OBDII connector is fully seated. Try connecting to a different OBDII-compliant vehicle to rule out a vehicle-specific issue.
- Screen is blank or frozen: Disconnect the device from the vehicle and reconnect it. If the issue persists, perform a software update.
- Incorrect language displayed: Navigate to the 'Option' or 'Language' menu to select the desired language.
Specifications
| Feature | Specification |
|---|---|
| Screen | 1.8" TFT, 160*128dpi |
| Voltage Range | 9-18V |
| Operating Temperature | 0℃ - 50℃ (32℉ - 122℉) |
| Environment Temperature | -20℃ - 70℃ (-4℉ - 158℉) |
| Dimensions (L*W*H) | 125mm * 70mm * 22mm (4.65" * 2.68" * 0.88") |
| Weight | 0.18kg |
| Supported Vehicles | All OBDII compliant cars from 1996 & newer |
| Supported Protocols | ISO9141-2, ISO14230-4, SAEJ1850, ISO15765-4 |
| Certification | RoHS, CE |
| Special Features | Full OBDII/EOBD diagnostic functions |


User Tips
- Always Consult Your Vehicle Manual: Before performing any diagnostics, it's advisable to consult your vehicle's owner's manual for specific information regarding its OBDII system.
- Do Not Clear Codes Blindly: Clearing Diagnostic Trouble Codes (DTCs) without addressing the underlying issue will likely result in the codes reappearing. Always diagnose and fix the problem first.
- Use Live Data for Deeper Insight: The live data stream can provide valuable real-time information about engine performance and sensor readings, which is crucial for pinpointing intermittent issues or verifying repairs.
- Keep Software Updated: Regularly check for software updates on the manufacturer's website to ensure your device has the latest vehicle compatibility and features.
Warranty and Support
The EDIAG YA101 comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or contact the seller directly. Software updates are provided free for the lifetime of the product via the internet.
For technical support or inquiries, please visit the official website of EDIAG or YAWOA, or contact your point of purchase.