Introduction
The GLEDOPTO GL-C-203P is a versatile ZigBee 3.0 Pro+ 2-in-1 LED Strip Light Controller designed for controlling Warm White/Cool White (WWCW) and Dimmer LED strips. It offers smart control capabilities through various platforms like Amazon Alexa, Homey, and Tuya Smart APP, provided a compatible ZigBee gateway is used. This controller supports a maximum total output current of 12A, allowing for longer LED strip installations. It also features quick-connect terminals for easier wiring and can be operated via an optional 2.4G RF remote control or wall switch.
GLEDOPTO GL-C-203P ZigBee LED Strip Controller shown with compatible smart home devices.
Important Notes
- GLEDOPTO ZigBee devices (Zigbee/Plus/Pro version Products) require a compatible ZigBee gateway for smart app and voice control.
- If you do not have a ZigBee gateway, you can use a GLEDOPTO 2.4G RF remote control or wall switch to operate Plus/Pro Version Products directly.
- This device is only compatible with the GLEDOPTO 2.4G RF remote control and cannot be used with other brands' remote controls.
- The 2.4G RF Remote Control and Wall Switch are separate accessories and only work with Plus/Pro Version Products (they are not ZigBee devices themselves).
- There may be some compatibility issues with IK*E*A smart home systems at present.
Package Contents
Diagram illustrating the items included in the package.
- 1x GLEDOPTO ZigBee Pro+ LED Strip Controller (Model: GL-C-203P)
- 1x User Manual
- 1x 3cm Sticker
- 1x Packaging Box
Specifications
Detailed product parameters for the GL-C-203P controller.
| Parameter | Value |
|---|---|
| Model No. | GL-C-203P |
| Input Voltage | DC12-24V |
| Total Output Current | 12A Max |
| Current/Channel | 12A Max |
| Wattage | 288W |
| Operating Temperature | -20°C to 45°C |
| Product Size | 108 x 45 x 18 mm |
| Material | Flame Retardant PC |
| Certification | CE, EMC, LVD, ROHS |
| Connection Mode | APP/Voice/RF Remote Control |
| Remote Distance | 30m |
| Applicable Lights | LED Strip |
| Wireless Protocol | Zigbee 3.0 |
Physical dimensions of the GLEDOPTO GL-C-203P controller.
Comparison of Zigbee 3.0 with other wireless protocols.
Setup and Installation
Wiring Instructions
The GL-C-203P controller features quick-connect terminals for simplified wiring. Ensure the power supply is disconnected before performing any wiring.
- Open the Connector: Gently open the connector upwards to expose the wire insertion points.
- Insert Wires: Insert the appropriate wires from your LED strip and power supply into the corresponding terminals. The controller supports 3-wire CCT, 2-wire CCT, and Dimmer configurations. Refer to the wiring diagram below for specific connections.
- Secure Wires: Press down on the connector after inserting the wires to secure them firmly.
- Verify Connection: Ensure all wires are securely connected and there are no loose strands.
Quick connect port design for convenient wiring.
Wiring Diagram
The controller supports three modes: WWCW (Warm White/Cool White), 2-wire CCT, and Dimmer. You can switch between these modes using the "Opt" button on the controller.
Detailed wiring diagrams for different LED strip types.
- 3 Wires CCT: Connect the V+, W, and C wires from the LED strip to the corresponding terminals on the controller.
- 2 Wires CCT: Connect the V+, W, and C wires from the LED strip to the corresponding terminals on the controller.
- Dimmer: Connect the V+ and V- wires from the LED strip to the corresponding terminals on the controller.
Pairing with a ZigBee Gateway
To enable smart app and voice control, pair your GLEDOPTO controller with a compatible ZigBee gateway (e.g., Tuya, SmartThings, Homey, Echo Alexa hub). Refer to your specific gateway's instructions for adding new ZigBee devices. Generally, this involves putting the gateway into pairing mode and then initiating pairing on the controller.
Pairing with GLEDOPTO 2.4G RF Remote Control/Wall Switch
If you are using a GLEDOPTO 2.4G RF remote control or wall switch without a ZigBee gateway, follow the pairing instructions provided with your remote/switch. Typically, this involves a short pairing sequence to link the controller and the RF device.
Operating Instructions
Controller Buttons (Reset, Opt, Push)
Key functions of the controller buttons.
- Reset Button:
- Short press once: Switch between CCT/Dimmer mode.
- Long press for more than 5 seconds: Reset the controller.
- Opt Button:
- Short press: On/Off.
- Short press twice: Switch the current long press function (Current long press is for adjusting brightness. After pressing twice, long press will switch to adjusting color temperature).
- Long press: Adjust color temperature/adjust brightness.
- Push Button (External):
- Short press: Power On/Off.
- Short press twice: Switch the current long press function (Current long press is for adjusting brightness. After pressing twice, long press will switch to adjusting color temperature).
- Long press: Adjust color temperature/adjust brightness.
- Indicator Light:
- Indicator light flashes slowly: CCT mode.
- Indicator light stays on: Dimmer mode.
Smart APP Control
Once paired with a ZigBee gateway (e.g., Tuya, SmartThings, Homey), you can control your LED strips using the corresponding smart home application on your Android or iOS phone. This allows for:
- Adjusting color temperature (Warm White to Cool White).
- Adjusting brightness (dimming).
- Setting scenes and schedules.
- Scene memory function.
App interface for color temperature adjustment.
App interface for brightness adjustment.
Voice Control
With a compatible ZigBee hub (e.g., SmartThings hub or Tuya Zigbee hub), you can use voice commands via Amazon Alexa Echo or Google Home to control your LED strips. Follow the setup instructions for integrating your ZigBee hub with your voice assistant.
2.4G RF Remote Control
If you are using a GLEDOPTO 2.4G RF remote control, you can directly control the LED strips without a ZigBee hub. The remote allows for adjusting color temperature, brightness, and saving/activating scenes.
Demonstration of wiring and control using a push switch and RF remote.
User Tips
- For optimal performance and stability, ensure your ZigBee gateway is within a reasonable range of the controller.
- When switching between CCT and Dimmer modes, observe the indicator light to confirm the active mode.
- If experiencing connectivity issues, try resetting the controller and re-pairing with your gateway or remote.
- Consider using the scene memory function on your remote or app to quickly recall preferred lighting settings.
Troubleshooting
- Controller not responding:
- Check power connections to ensure the controller is receiving power.
- Verify that the LED strip is correctly wired to the controller.
- If using a ZigBee gateway, ensure the gateway is powered on and connected to your network.
- Try resetting the controller by long-pressing the "Reset" button for more than 5 seconds.
- Cannot pair with ZigBee gateway:
- Ensure your gateway is in pairing mode.
- Make sure the controller is within range of the gateway.
- Reset the controller and attempt pairing again.
- Check for any firmware updates for your gateway or controller.
- Remote control not working:
- Ensure the remote control is a GLEDOPTO 2.4G RF remote and is paired with the controller.
- Check the battery in the remote control.
- Ensure the remote is within the 30m operating range.
- Incorrect color temperature or brightness:
- Verify that the controller is in the correct mode (CCT or Dimmer) as indicated by the light. Use the "Reset" button to switch modes if necessary.
- Adjust settings via the app or remote control.
Maintenance
- Keep the controller in a dry environment, away from moisture and extreme temperatures.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Regularly check wiring connections to ensure they remain secure.
Warranty and Support
The GLEDOPTO GL-C-203P controller comes with a 2-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact GLEDOPTO customer service or your retailer. You can also find more information and FAQs on the GLEDOPTO official website.
For Q&A or more information, please contact us online, and we will answer you in time.
