GTMEDIA V8 Finder 2 Satellite Meter User Manual

1. Product Overview

The GTMEDIA V8 Finder 2 is a portable digital satellite finder meter designed for quick and accurate satellite dish installation and signal analysis. It supports DVB-S2X/S2/S standards, features a 3.5-inch HD LCD screen, and includes advanced tools like a spectrum analyzer and constellation analyzer. Its robust design, long-lasting battery, and multiple connectivity options make it an essential tool for both professional technicians and DIY enthusiasts.

Figure 1: GTMEDIA V8 Finder 2 Satellite Meter highlighting DVB S2X/S2/S, Spectrum, Loop Search, 3.5 inch HD LCD, 4000mA Large Capacity, 18W Fsat Charging, Media, USB, and Upgrade features.

Figure 2: Interface functions including LNB IN, USB, Power Supply, HD OUT, AV OUT, AV IN, Power switch, and 3.5" high-resolution digital display LCD.

2. Package Contents

Please check the package contents upon receipt to ensure all items are present:

• 1 × Digital Satellite Meter (GTMEDIA V8 Finder 2)
• 1 × User Manual
• 1 × Warranty Card
• 1 × Adapter Set
• Optional: Charging Head ×1 + Backpack ×1 (may vary by purchase option)

Figure 3: Contents of the GTMEDIA V8 Finder 2 package.

3. Setup Guide

3.1 Initial Charging

Before first use, fully charge the device. The V8 Finder 2 is equipped with a 7.4V/4000mAh Li-ion battery and supports Type-C 18W fast charging.

• Connect the provided adapter to the Type-C port on the device.
• Plug the adapter into a power outlet.
• The charging indicator will illuminate. Allow the device to charge until the indicator shows a full charge.

Figure 4: Device with battery capacity indication.

3.2 Connecting to Satellite Dish

To begin signal detection, connect the device to your LNB (Low Noise Block) on the satellite dish.

• Ensure the V8 Finder 2 is powered off.
• Connect the coaxial cable from your LNB to the 'LNB IN' port on the top of the V8 Finder 2.
• If connecting to an external display, use an HDMI cable from 'HD OUT' or AV cables from 'AV OUT' to your TV/monitor.
• Power on the device using the power switch.

Figure 5: Simple operation method for connecting the device to a satellite dish and external power, then searching for signals.

4. Operating Instructions

4.1 Navigating the User Interface

The V8 Finder 2 features an intuitive menu system. Use the directional buttons (UP, DOWN, LEFT, RIGHT) and the OK button to navigate and select options. The EXIT button returns to the previous screen.

Figure 6: Main menu screen of the V8 Finder 2.

4.2 Satellite Installation and Scanning

To find and install satellites:

• From the main menu, select 'Installation'.
• Choose a satellite from the preset list or add a new one.
• Adjust LNB Frequency, DiSEqC settings (1.0/1.1/1.2), and Transponder details as needed.
• Use the 'Scan' option to search for channels. The device supports Auto/Blind/Manual/NIT scan modes.
• Monitor the Signal Intensity and Quality bars for optimal dish alignment.

Figure 7: Satellite installation and signal analysis screens.

4.3 Spectrum Analyzer

The built-in spectrum analyzer helps visualize signal quality in real-time.

• From the main menu, select 'Spectrum'.
• Observe the graphical representation of signal strength across frequencies.
• Adjust the dish position to maximize signal peaks and minimize noise.

4.4 Auto Angle Calculation (AZ/EL)

This feature simplifies dish alignment by calculating the azimuth and elevation angles.

• From the main menu, select 'Calculate'.
• Enter your local longitude and latitude.
• The device will display the required Azimuth (AZ) and Elevation (EL) angles for the selected satellite.

4.5 Media Playback and USB Functions

The V8 Finder 2 supports media playback and USB connectivity.

• Connect a USB drive to the USB 2.0 port.
• From the main menu, select 'Media' to browse and play music, pictures, or movies.
• The USB port can also be used for firmware upgrades and data backup.
• With a compatible USB WiFi 2.4G adapter, the device can support online features like YouTube.

Figure 8: USB connectivity for WiFi and media.

5. Maintenance

5.1 Cleaning

• Use a soft, dry cloth to clean the device.
• Do not use liquid cleaners or aerosols, as they may damage the device.
• Keep the screen free from dust and smudges for clear visibility.

5.2 Battery Care

• Avoid fully discharging the battery frequently.
• Charge the device regularly, even if not in use, to maintain battery health.
• Store the device in a cool, dry place when not in use for extended periods.

5.3 Firmware Updates

The V8 Finder 2 supports USB upgradable firmware. Check the official GTMEDIA website or support forum for the latest firmware versions and instructions.

• Download the firmware file to a USB drive.
• Connect the USB drive to the device.
• Navigate to 'Tools' -> 'USB Upgrade' in the system menu and follow the on-screen prompts.

6. Troubleshooting

6.1 No Signal Detected

• Check LNB Connection: Ensure the coaxial cable is securely connected to the 'LNB IN' port and the LNB on the dish.
• LNB Short Protection: The device has LNB short protection. If a short circuit is detected, it will alert you. Check the cable for damage.
• Dish Alignment: Verify that the satellite dish is correctly aligned to the target satellite using the AZ/EL calculation and spectrum analyzer.
• Transponder Settings: Confirm that the transponder frequency, symbol rate, and polarity settings are correct for the desired satellite.

6.2 Device Not Powering On

• Battery Level: Ensure the battery is sufficiently charged. Connect the device to the power adapter.
• Power Switch: Verify the power switch is in the 'ON' position.

6.3 Screen Issues

• Brightness: Adjust screen brightness in the system settings if the display is too dim or bright.
• No Display: If the device powers on but the screen remains blank, try connecting to an external display via HDMI or AV Out to diagnose.

6.4 Factory Reset

If you encounter persistent software issues, a factory reset may resolve them. This will erase all user settings and installed satellites.

• Navigate to 'Tools' -> 'Factory Setting' in the system menu.
• Confirm the reset when prompted.

7. Specifications

Figure 9: Detailed product specifications.

8. Warranty and Support

Your GTMEDIA V8 Finder 2 comes with a product warranty. Please refer to the included Warranty Card for details on coverage and terms.

8.1 Technical Support

• For detailed instructions, consult the User Manual provided in the package.
• Video guides are available to assist with setup and operation.
• Visit the official GTMEDIA forum or website for additional support, FAQs, and firmware updates.
• Contact support@gtmedia.cc for technical assistance.

9. User Tips

• Outdoor Use: When using outdoors, utilize the optional protective bag to shield the device from elements and accidental drops.
• Battery Life: To extend battery life during long fieldwork, consider carrying a power bank, as the device supports reverse charging.
• Signal Lock Confirmation: Pay attention to the built-in speaker for audio feedback, which can help confirm signal lock without constantly looking at the screen.
• Pre-setting Satellites: Take advantage of the device's ability to preset all satellite information to save time during installation.
• Firmware Updates: Regularly check for and install firmware updates to ensure optimal performance and access to new features.