GTMEDIA V8X Satellite Receiver User Manual

This document provides comprehensive information for the GTMEDIA V8X Satellite Receiver.

Introduction

Welcome to the GTMEDIA V8X User Manual. For further introductions to product functions, user manuals, software updates, and technical support, please visit the official forum at www.freesat.cn and the official channel www.youtube.com/c/gtmediapub.

Manufactured by: Shenzhen GTMEDIA Technology Co., Ltd

European Company: GTMAX TECHNOLOGY, S.L.

Contact Mail: support@gtmedia.cc

Safety Instructions

This STB (Set-Top Box) has been manufactured to meet international safety standards. Please read the following safety instructions carefully.

Power Supply: Operate the device only with the power source specified under "Technical Data" (100-240V AC 50/60Hz).
Overload: Do not overload the socket, extension cord, or adapter, as this can lead to fire or electric shock.
Liquids: Keep liquids away from the STB. The device must not be exposed to drops or splashes. Do not place liquid-filled items, such as vases, on the device.
Cleaning: Disconnect the STB from the power outlet before cleaning. Use a slightly damp cloth (no solvents) to dust the STB.
Ventilation: The slots on top of the STB must remain unobstructed to allow proper airflow. Do not place the STB on soft furniture or carpets. Do not expose the STB to direct sunlight or place it near a heater. Do not stack electronic devices on the STB.
Attachments: Do not use any accessories that are not recommended, as they may pose a risk to the STB.
Satellite LNB Connection: Disconnect the STB from the mains before disconnecting or connecting the cable from the satellite dish. Incorrect handling can damage the LNB.
TV Connection: Disconnect the STB from the mains before disconnecting or connecting the cable from the satellite dish. Incorrect handling can damage the TV.
Grounding: The LNB cable MUST be grounded for system grounding of the satellite dish. Unplug the power adapter during thunderstorms or when not in use for extended periods.
Location: Place the STB indoors to protect it from lightning, rain, or sunlight.
Warning: Terminals marked with a symbol [Electrical Hazard Symbol] can be live, posing a risk of electric shock. External wiring connected to these terminals requires installation by an authorized person or the use of pre-assembled cables.
CAUTION: RISK OF ELECTRIC SHOCK - DO NOT OPEN. The explanation of symbols, markings, indicator lights, or similar means indicates that the device is completely disconnected from the mains. This device is a Class II or double-insulated electrical device. It is designed so that no safety connection to electrical earth is required. The lightning symbol with an arrow inside an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure, which may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove the cover (or back), as there are no user-serviceable parts inside. Refer servicing to qualified personnel. The exclamation mark in an equilateral triangle is intended to alert the user to important operating and maintenance instructions in the accompanying documentation of the device.
Proper Disposal: This marking indicates that this product must not be disposed of with household waste throughout the EU. To prevent possible damage to the environment or human health from uncontrolled waste disposal, conduct responsible recycling to promote the sustainable reuse of material resources. To return your used device, please use the return and collection system or contact the dealer where the product was purchased. You can use this product for environmentally friendly recycling. Operating Temperature: 0 ~ 35°C.

Features

Main Features:

Support for DVB-S / S2 / S2X demodulation.
High Definition STB-Decoder, Full HD 1080P output via HD.
Standby power consumption under 1 Watt.
SCPC and MCPC requirements from C / KU-band satellites are supported.
DiSEqC 1.0, 1.1, 1.2, SUALS, and Unicable are supported.
RJ45 for 100-Mbit/s Ethernet interface.
Built-in 2.4 G WIFI.
1 * USB 2.0 Host, supports PVR-ready, recording, and time-shifting.
Video Decoding: MPEG-4 / H.265, MP @ ML, MP @ HL, MP@4.1, XVID, DIVX.
Audio Decoding: LPCM, AAC-LC, HE-AAC, MP3, Dolby.
Automatic PAL / NTSC conversion.
Supports over 6000 channels (TV and Radio).
31 different favorite group selections.
Electronic Program Guide (EPG).
Subtitle support.
Videotext supported via VBI insertion and software emulation.
Network Scan, Blind Scan, and LCN functions.
Child lock by channel and program event.
PIG function (Full Picture In Graphic).
Multilingual menu text support.
Software upgrade via USB and RS232.

Explanation:

Technical data may be changed without prior notice.
The manufacturer assumes no responsibility for errors or typos.
Please note that new software may change the receiver's functions.
The manufacturer reserves the right to make changes without further notice.
The image shown here is for orientation purposes only. The actual product may differ.

Front Panel and Connections

Front Panel:

Remote Control Sensor: Detects the infrared signal from the remote control.
POWER Indicator: Indicates when the receiver is powered on and in standby mode.
USB: USB 2.0 Host, for connecting USB hard drives or flash disks.
Display: (LED-Type) Shows the receiver's operating status.

TV Connection

AV Connection: Connect the three-color AV cable (Red / White / Yellow) to the AV output interface of the television, and the other end to the AV input interface of the television. Ensure the connection is made by color, and the television is set to AV input mode.

HD OUT Connection: Connect the HD cable to the product's HD OUT interface, and the other side to a television. The television must be set to the appropriate HDMI input mode.

Connection Diagram Description: The diagram illustrates the connections for a satellite receiver system. An Antenna connects via an Antenna Cable to the LNB IN port on the receiver. The receiver has multiple output ports including HD OUT, SCART, AV OUT, USB, and ETHERNET. A Router connects to the receiver via a Network Cable to the ETHERNET port. An AC/DC Adapter connects to the receiver's DC 12V input and a Power Switch. The receiver also has a CA Card Slot.

Remote Control

You can turn the receiver on and off, access the screen menu, and use various hotkey functions with the remote control.

TV Control (Learning Steps):

Ensure the two emitters are aligned and approximately 1-3 cm apart.
Press and hold the " /SET " button for 5 seconds until the display changes from blinking to solid light, entering the learning mode.
Press the button you wish to learn. The display will blink slowly, entering the learning reception status.
Press the learning button for about 1 second and release it; the display will change from blinking to solid light after learning. Repeat steps 3 and 4 to learn more buttons.
To exit learning, press any other button to save automatically and exit the learning status. The display will turn off.

Button Functions:

POWER ⏻: Standby On/Off.
0-9 Keys: Used for channel selection or entering programming parameters.
RECALL: Returns to the previous channel.
TV/RAD: Switches the receiver between TV and Radio modes.
MENU ☰: Displays the main menu on the screen or returns to the previous menu/status. If DVB is started, press continuously to activate the forced update mode.
EXIT ❌: Cancels user selection and returns to the view mode via a menu.
OK ✔️: Selects a menu option or updates an entry.
VOL+/- ?⬆️/?⬇️: Adjusts volume or moves the cursor left/right in the menu.
CH+/- ?⬆️/?⬇️: Changes the channel or moves the cursor up/down in the menu.
SAT: Displays the satellite list as a normal picture or switches satellites.
FAV: Sets the receiver to the preferred server mode and displays the favorite channel.
PAGE +/-: Moves the cursor to the next or previous page in the channel list.
YouTube ▶️: Quickly access the YouTube list.
MUTE: Mutes the sound.
AUDIO: Audio channel setup: Left, Right, Stereo, and Mono.
INFO: Displays the channel status or various program information for the current service.
EPG: Displays the program guide, if available.
SLEEP: Press the Sleep button to set the standby timer.
S.MODE: Switches the output resolution.
TV MODE: (Menu Mode) The TV mode can be switched between PAL or NTSC.
FIND: Use this option to start a channel search by character.
TEXT: Displays Teletext information for the current channel support.
SUBT: Subtitle display.
▶️⏸️ (II/Play/Pause): Multimedia playback and pause.
⏹️ (STOP): Stops Time Shift, recording, or MP3/JPEG playback.
? (REC): Records the currently playing program. Press again to set the recording duration.
? M/P (Red Key): Multifunction key.
? Video (Green Key): Quickly access the user-defined video list (multifunction key).
? PVR LIST (Yellow Key): Quickly access the PVR LIST (multifunction key).
? TIMER (Blue Key): Press this button to display the time list (multifunction key).

Note: The image is for reference only; please use the actual object as the standard.

Getting Started & Settings

Getting Started:

Ensure that you have installed and connected the receiver's cables correctly.
When the receiver is in its factory default state or has no program list, the main menu window will appear on the screen upon power-on. The digital display will light up for approximately 20 seconds before entering the main interface.
In normal TV / Radio mode, press the MENU button on the remote control to access the main menu window.

Factory Settings:

Press the OK button to access the Factory Settings window. Select YES and press OK to return to factory settings. All scanned channels and configured information will be deleted.

Select the NO button and press the OK button to cancel this operation, or press the MENU or EXIT button to cancel and exit the process.

Troubleshooting:

Warning! Under no circumstances should you attempt to repair the receiver yourself. Tampering with the receiver can lead to a fatal electric shock and will void your warranty.

Note: For further support guidelines, please visit the official website: http://www.freesat.cn.

	GTMEDIA V8 X Satellite Receiver User Manual Comprehensive user manual for the GTMEDIA V8 X satellite receiver, covering safety instructions, features, front panel, remote control, startup, factory settings, and troubleshooting.
	GTMEDIA V8 UHD Satellite Receiver User Manual Comprehensive user manual for the GTMEDIA V8 UHD satellite receiver, covering safety instructions, features, front panel and connection details, remote control functions, USB upgrade procedures, and troubleshooting tips.
	GTMEDIA V8X DVB-S/S2/S2X Satellite Receiver: Features and Specifications Comprehensive details on the GTMEDIA V8X satellite receiver, covering its DVB-S/S2/S2X capabilities, HEVC support, IPTV features, hardware specifications, software functions, and connectivity options.
	GTMEDIA V8 Finder Pro: Satellite Finder and Signal Meter Specifications Detailed specifications and key features of the GTMEDIA V8 Finder Pro, a DVB-S2X/S2/S/T2/T/C/ATSC-C compliant handheld combo meter for satellite TV installation and verification.
	GTMEDIA V8 Finder 2 Digital Satellite Finder User Manual Comprehensive user manual for the GTMEDIA V8 Finder 2 Digital Satellite Finder, covering installation, operation, safety instructions, menu navigation, and troubleshooting.
	GTMEDIA G5 User Manual: Features, Safety, and Operation Guide Comprehensive user manual for the GTMEDIA G5 digital receiver. Details key features, essential safety instructions, remote control functions, startup procedures, software upgrades (USB/OTA), and troubleshooting tips. Includes connection diagrams and FCC compliance information.
	GTMEDIA Converter X1 User Manual: Features, Setup, and Safety Comprehensive user manual for the GTMEDIA Converter X1 digital TV receiver, covering key features, configuration, safety instructions, connections, remote control operation, startup, software upgrades, and troubleshooting.
	Hawkeye Ai15 Handheld Thermal Monocular User Manual Comprehensive user manual for the GTMEDIA Hawkeye Ai15 Handheld Thermal Monocular, detailing its features, functions, specifications, and operation.