FLYSKY FS-ST16 2.4G 16CH RC Radio Digital Transmitter Controller with SR8 Receiver

1. Introduction

The FLYSKY FS-ST16 is a high-performance 2.4G 16-channel digital radio transmitter designed for various RC models, including airplanes, cars, and boats. It utilizes the advanced ANT protocol for reliable communication and comes equipped with an SR8 receiver. This manual provides essential information for setting up, operating, and maintaining your FS-ST16 transmitter to ensure optimal performance and longevity.

2. Package Contents

Please inspect the package contents carefully. If any items are missing or damaged, contact your retailer.

• 1x FLYSKY FS-ST16 Remote Control Transmitter
• 1x FS-SR8 Receiver
• 1x Quick Start Guide
• 1x USB Type-C Cable
• 1x SetBack Sense Throttle Plate

3. Specifications

4. Setup Guide

4.1. Battery Installation and Charging

The FS-ST16 transmitter supports robust battery life with versatile power options. It is compatible with two 18650 batteries or 2S lithium batteries. Ensure correct polarity when installing batteries.

• Battery Type: 18650*2PCS or 2S LiPo.
• Connectors: The battery compartment includes a 2S battery balance connector and a JST connector for various battery types.
• Charging: The transmitter features a new Type-C interface for charging 2S lithium batteries. Connect the provided USB Type-C cable to the transmitter and a suitable USB power source.

4.2. Antenna Configuration

The FS-ST16 features a dual-antenna design for reliable signal transmission.

• Built-in Antenna: The transmitter has a built-in FPC antenna.
• External Antenna: A reserved external antenna interface allows for the connection of an external folding antenna, making the internal antenna replaceable if needed. Ensure the external antenna is securely connected for optimal range.

4.3. Receiver Binding

To establish communication between the transmitter and your model, you must bind the FS-SR8 receiver (or other compatible ANT protocol receivers) to the FS-ST16 transmitter. Refer to the Quick Start Guide for detailed binding instructions specific to the SR8 receiver.

4.4. Initial Power On and Mode Selection

Press and hold the power button to turn on the transmitter. The 3.5-inch IPS display will illuminate. The FS-ST16 supports different control modes (e.g., Mode 1 Right Hand, Mode 2 Left Hand). You can select your preferred mode during initial setup or in the system settings.

5. Operating Instructions

5.1. Basic Controls and Ergonomics

The FS-ST16 features an ergonomic design with a classic Kevlar grip for enhanced feel and visual effect, ensuring ultimate comfort during use. It includes gimbals, switches, and knobs for precise control.

5.2. Model Selection and Configuration

The FS-ST16 supports up to 40 sets of model data and 16 PWM channels, making it suitable for multi-channel and multi-model applications. The system offers multiple preset model structures and options for wing and tail layouts.

• Model Select: Navigate through the menu to select and manage up to 40 different model profiles.
• Channel Monitor: Use the channel monitor to view the output of all 16 channels.
• Model Types: Configure settings for various model types, including airplanes, drones, and boats, with options for wing layout (Normal, AIL VATOP, Wing layout, 1Aileron, 2Aileron, 2Aileron+1Flap, 2Aileron+2Flap) and tail layout (Normal, V Tail, Optional).

5.3. Advanced Parameter Settings

The FS-ST16 offers rich parameter settings to tackle various challenges and customize your flying experience.

• Dual-Ratio Curves: 10 sets of dual-ratio curves.
• Flight Modes: 5 sets of flight modes.
• Programmed Hybrid Control: 20 sets of programmed hybrid control.
• Throttle Curve: 11 adjustable points on the throttle curve.
• Adjustable Operation Parameters: Customize various other operation parameters for precise control.

5.4. Live Voice Broadcasting

The transmitter provides live voice broadcasting, offering real-time access to important information such as voltage broadcasting, low signal alarms, and function operation confirmations.

5.5. Colorful Light Control

The FS-ST16 features colorful light control, allowing you to customize the illumination of the gimbals and other areas, creating a captivating focal point.

6. Maintenance

6.1. Cleaning

Regularly clean the transmitter with a soft, dry cloth. Avoid using harsh chemicals or solvents that could damage the display or casing.

6.2. Battery Care

• Always use recommended batteries (18650 or 2S LiPo).
• Charge batteries using the integrated Type-C port or an appropriate external charger.
• Do not overcharge or over-discharge batteries.
• Remove batteries if the transmitter will not be used for an extended period.

6.3. Firmware Updates

The FS-ST16 supports online firmware updates. Regularly check the official FLYSKY website for the latest firmware versions to ensure optimal performance and access to new features. The Type-C interface can be used for firmware upgrades and model data backup.

6.4. Storage

Store the transmitter in a cool, dry place away from direct sunlight and extreme temperatures. Use a protective case to prevent physical damage.

7. Troubleshooting

• Transmitter does not power on: Check battery installation and charge level. Ensure batteries are correctly inserted and fully charged.
• No signal to receiver: Verify that the transmitter and receiver are properly bound. Check antenna connections on both the transmitter and receiver. Ensure the model is within the operational range (no less than 1500m air distance without interference).
• Controls unresponsive: Check battery levels. Re-bind the receiver if necessary. Ensure no physical obstructions are interfering with the gimbals or switches.
• Display issues: If the display is dim or unresponsive, ensure sufficient power. The 3.5-inch IPS display is designed for high brightness, even in sunlight.
• Voice broadcasting alarms: Pay attention to voice prompts for low voltage or low signal warnings and take appropriate action.

8. User Tips

• Comfortable Handling: Utilize the multi-functional hook design for control straps or phone holders to find a comfortable posture during extended use. The classic Kevlar grip also enhances comfort.

• 

• Lightweight for Long Sessions: The transmitter weighs only 665g, making it lightweight and easy to hold for prolonged flying sessions without fatigue.

• 

• Precision Control: The high-precision Hall assembly seat offers 4096-grade resolution, linearity error less than 0.15%, and stability greater than 1us, providing exceptional control accuracy.

• 

• Open Source Support: The H7 architecture chip supports both Flysky and open-source firmware (like EdgeTX), offering flexibility for advanced users to customize and expand functionality.

• 

9. Warranty and Support

For warranty information and technical support, please refer to the official FLYSKY website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.