EPever XTRA-N-XDS2

Contents

EPEVER XTRA-N-XDS2 MPPT Solar Charge Controller

User Manual

Model: XTRA-N-XDS2 | Brand: EPever

1. Introduction

The EPEVER XTRA N series controller, featuring different display units (XDB1/XDS1/XDS2), utilizes an advanced Maximum Power Point Tracking (MPPT) control algorithm. This technology minimizes power point loss and tracking time, quickly identifying the maximum power point (MPP) of the PV array to extract maximum energy from the solar array under various conditions. Compared to traditional PWM charging methods, it can increase the energy utilization ratio in solar systems by 20%-30%.

Key features include limiting charging power and current, and reducing charging power functions to ensure system stability, especially with oversized PV modules in high-temperature environments. With IP33 ingress protection and an isolated RS485 design, the controller's reliability is enhanced, meeting diverse application requirements.

The XTRA N series controller incorporates a self-adaptive three-stage charging mode based on a digital control circuit, effectively prolonging battery lifespan and significantly improving system performance. It also offers comprehensive electronic protection against overcharge, overdischarge, PV & battery reverse polarity, ensuring a more reliable and durable solar system. This controller is suitable for RVs, household systems, field monitoring, and other applications.

2. Safety Information

Please read all instructions and warnings in this manual carefully before installation and operation. Keep this manual for future reference.

  • Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller and connected devices.
  • Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order.
  • Do not attempt to repair or modify the controller. Refer to qualified personnel for service.
  • Install the controller in a well-ventilated area, away from flammable materials and corrosive gases.
  • Ensure the system voltage is compatible with the controller's specifications.
  • Wear appropriate personal protective equipment (PPE) when working with electrical systems.

3. Product Overview

3.1 Features

  • CE certification (LVD EN/IEC62109, EMC EN61000-6-1/3)
  • 100% charging and discharging within the working environment temperature range.
  • Optional LCD display units (XDB1/XDS1/XDS2).
  • High-quality, low-failure-rate components (ST or IR) for extended service life.
  • Advanced MPPT technology with ultra-fast tracking speed, ensuring tracking efficiency up to 99.5%.
  • Maximum DC/DC transfer efficiency up to 98.3% (XTRA3415N@48V system), full load efficiency up to 97.3%.
  • Advanced MPPT control algorithm to minimize MPP lost rate and time.
  • Accurate recognition and tracking of multi-peaks maximum power point.
  • Wide MPP operating voltage range.
  • Supports lead-acid and lithium batteries, with programmable temperature compensation.
  • Limits charging power & current beyond rated values.
  • Real-time energy statistics function.
  • Automatic power reduction when temperature exceeds set value.
  • Multiple load work modes.
  • Comprehensive electronic protection.
  • Isolated RS485 with 5V/200mA protected output for devices without external power, using Modbus protocol.
  • Supports monitoring and parameter setting via APP or PC software.
  • IP33 Ingress protection (protected against solid objects over 2.5mm and sprays to 60° from the vertical).

3.2 Product Characteristics and Components

The following diagram illustrates the main components and terminals of the XTRA-N-XDS2 controller.

EPEVER XTRA-N-XDS2 Product Characteristics Diagram
Figure 1: Product Characteristics and Terminal Layout
  • RTS* port (Remote Temperature Sensor)
  • PV Terminals (Solar Panel Input)
  • Battery Terminals
  • Load Terminals
  • RS485 communication port
  • Terminal protection cover
  • Display units (LCD)
  • Mounting Hole Φ5mm

Note: If the temperature sensor is short-circuited or damaged, the controller will charge or discharge according to the voltage setting point at the default temperature setting of 25°C (no temperature compensation).

Side view of EPEVER XTRA-N-XDS2 showing terminals
Figure 2: Side view of the controller showing terminals and heat sink.
Angled view of EPEVER XTRA-N-XDS2 showing LCD and terminals
Figure 3: Angled view of the controller.

4. Setup and Installation

4.1 Wiring Diagram

The XTRA-N-XDS2 controller supports a smart 4-stage charging process to prolong battery lifespan and improve system performance. Ensure correct wiring as shown in the diagram below.

Smart 4-stage MPPT charge controller wiring diagram
Figure 4: Smart 4-Stage MPPT Charge Controller Wiring Diagram. Connects Solar Panel to Controller, and Controller to Battery. Charging stages include Bulk, Boost, Float, and Equalization Charge.

Wiring Order:

  1. Connect the battery to the controller's battery terminals.
  2. Connect the solar panel to the controller's PV terminals.
  3. Connect the DC load to the controller's load terminals (if applicable).

Disconnection Order: Reverse the connection order.

4.2 Battery Compatibility

The controller is compatible with a wide range of battery types, including lead-acid (Sealed, Gel, Flooded) and Lithium batteries. It supports both 12V and 24V battery configurations, and can also operate in 36V and 48V auto-sensing systems.

Battery compatibility diagram for EPEVER XTRA-N-XDS2
Figure 5: Battery Compatibility. Shows 12V and 24V battery configurations. Supports Lead-acid (Sealed, Gel, Flooded) and Lithium batteries.
EPEVER XTRA-N-XDS2 working with various battery types
Figure 6: Works with various battery types including Lead-Acid, Lithium, LiFePO4, LiNiCoMnO2, Sealed, Gel, and Flooded.

4.3 Optional Accessories

Enhance the functionality and monitoring capabilities of your controller with optional accessories:

Optional accessories for EPEVER XTRA-N-XDS2
Figure 7: Optional Accessories. Includes MT50 remote meter, USB Cable, Remote Temp. Sensor, RS485-1M2S, BLE module, WIFI module, and eLog01 data logger.
EPEVER XTRA-N-XDS2 communication accessories diagram
Figure 8: Communication Accessories Diagram. Shows how various modules like MT50, eBox-WIFI-01, eBox-BLE-01, OTG-12CM, USB cable, and eLog01 connect to the controller via RS485 for mobile app or PC monitoring.

5. Operating Instructions

5.1 LCD Display and Navigation

The controller features an LCD display for real-time monitoring of system parameters and status. Use the buttons below the display to navigate menus and adjust settings.

EPEVER XTRA-N-XDS2 LCD display and system operation
Figure 9: LCD Display and System Operation. Shows a typical solar home system setup with the controller and its LCD display. The LCD displays parameters like kWh, V, A, %, °C, Hz.

The LCD provides information on:

  • PV array voltage and current
  • Battery voltage and charging current
  • Load current
  • System energy statistics (kWh)
  • Battery state of charge (%)
  • Temperature (°C/°F)
  • Error codes and warnings

5.2 Parameter Programming and Monitoring

More parameters can be programmed and monitored through various interfaces:

  • Via MT50 Remote Meter: Connect the MT50 remote meter to the controller's RS485 port for advanced monitoring and parameter adjustments.
  • Via Phone APP (BLE/WIFI): Use the eBox-BLE-01 or eBox-WIFI-01 module to connect the controller to a smartphone app for wireless monitoring and control.
  • Via PC Software (USB Cable): Connect the controller to a PC using a USB cable (e.g., CC-USB-RS485-150U) and dedicated PC software for detailed data logging, analysis, and parameter configuration.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your solar charge controller.

  • Check Connections: Periodically inspect all wiring connections for tightness and corrosion. Loose connections can cause overheating and power loss.
  • Clean the Controller: Keep the controller's casing and heat sink clean from dust and debris to ensure proper heat dissipation. Use a dry cloth for cleaning.
  • Inspect for Damage: Look for any signs of physical damage, such as cracks, frayed wires, or discoloration.
  • Battery Health: Monitor battery voltage and performance. Ensure batteries are properly maintained according to their manufacturer's guidelines.
  • Software Updates: Check the manufacturer's website for any firmware updates for the controller to ensure you have the latest features and bug fixes.

7. Troubleshooting

This section provides basic troubleshooting steps for common issues. For more complex problems, consult the full technical manual or contact customer support.

Problem Possible Cause Solution
No display on LCD Battery not connected or low voltage; loose wiring. Check battery connections and voltage. Ensure battery voltage is above minimum operating threshold.
Battery not charging PV array not connected; insufficient solar input; PV reverse polarity; battery full. Check PV connections and ensure adequate sunlight. Verify PV polarity. Check battery charge status.
Load not working Load disconnected; overcurrent protection; low battery voltage; load short circuit. Check load connections. Reduce load. Charge battery. Check for short circuits in the load.
Controller overheating Poor ventilation; excessive ambient temperature; overloaded system. Ensure proper airflow around the controller. Relocate to a cooler environment if possible. Reduce system load.

8. Technical Specifications

Below are the detailed technical specifications for the EPEVER XTRA-N-XDS2 series controllers.

8.1 Electrical Specifications

EPEVER XTRA-N-XDS2 Electrical Specifications Table Part 1
Figure 10: Electrical Specifications (Part 1)
EPEVER XTRA-N-XDS2 Electrical Specifications Table Part 2
Figure 11: Electrical Specifications (Part 2)

8.2 Environmental, Certification, and Mechanical Specifications

EPEVER XTRA-N-XDS2 Environmental, Certification, and Mechanical Specifications Table
Figure 12: Environmental, Certification, and Mechanical Specifications

Notes from Specifications:

  • When selecting lithium battery type, the system voltage can't be identified automatically.
  • At minimum operating environment temperature.
  • At 25°C environment temperature.
  • When selecting lithium battery type, the temperature compensation coefficient is 0, and can't be set.
  • The parameters are 12V system at 25°C, x2 in 24V system at 25°C, x4 in 48V system at 25°C.
  • The controller can full load working in the working environment temp. range. When the internal temperature reach to 81°C, the reducing charging power mode is turned on.
  • 3-protection against solid objects: protected against solids objects over 2.5mm.
  • 2-protection against liquids: protected against direct sprays up to 15° from the vertical.

9. User Tips

Based on common user experiences and best practices:

  • Optimal Placement: Install the controller in a location with good airflow to prevent overheating, especially in warmer climates.
  • Cable Sizing: Always use appropriately sized cables for your solar array and battery bank to minimize voltage drop and maximize efficiency. Refer to the 'Recommended cable' in the mechanical specifications.
  • Battery Settings: For optimal battery health, ensure the correct battery type is selected in the controller settings. For lithium batteries, manual voltage settings might be required.
  • Monitoring: Utilize the optional MT50 remote meter or mobile app/PC software for detailed monitoring of your system's performance and to fine-tune settings.
  • Grounding: Ensure proper grounding of the system for safety and to prevent electromagnetic interference.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official EPEVER website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.

Contact information for EPEVER (as per provided image):

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.