FLYSKY FS-ST16

Contents

FLYSKY FS-ST16 16-Channel 2.4G Digital Remote Control Transmitter User Manual

Model: FS-ST16 | Brand: FLYSKY

1. Introduction

The FLYSKY FS-ST16 is a high-performance 16-channel 2.4G digital remote control transmitter designed for a wide range of RC models, including FPV drones, cars, and boats. It utilizes the advanced ANT protocol for reliable communication and comes equipped with an SR8 receiver. This transmitter boasts robust features such as versatile power options, a multi-functional Type-C interface for firmware upgrades and data backup, a high-resolution IPS display, and support for both Flysky and open-source firmware like EdgeTX. Its ergonomic design, lightweight construction, and rich parameter settings make it a versatile and user-friendly choice for enthusiasts.

2. Package Contents

Please inspect the package contents carefully. If any items are missing or damaged, contact your retailer.

  • 1 x FLYSKY FS-ST16 Remote Control Transmitter
  • 1 x FLYSKY FS-SR8 Receiver
  • 1 x Quick Start Guide
  • 1 x USB Type-C Cable
  • 1 x SetBack Sense Throttle Plate
FLYSKY FS-ST16 Transmitter and SR8 Receiver in packaging

Image: FLYSKY FS-ST16 Transmitter and SR8 Receiver in packaging.

3. Specifications

FeatureSpecification
Product ModelFS-ST16
Compatible ReceiverFS-SR8 and other ANT protocol receivers
Compatible RC ModelAirplanes, cars, boats
Number of Channels16
RF Frequency2.4GHz ISM
Maximum Power<20dBm (e.i.r.p.) (EU)
RF ProtocolANT
Resolution4096
Data ConnectorsUSB Type-C, 3.5mm Audio Jack (DSC), SD card slot
Input Power6-9V/DC; 18650*2PCS/2S LiPo
DistanceNo less than 1500m (Air distance without interference)
AntennaTwo antennas (One built-in, one external folding)
Display3.5 inch 320*480 full dot color non-touch IPS screen
Online UpdateYes
Temperature Range-10℃ ~ +60℃
Humidity Range20% ~ 95%
ColorBlack
LanguageEnglish
Weight665g
Dimensions224.1*180*101.3mm
Charging JackYes (Type-C Port)
MaterialComposite Material
Batteries IncludedNo
Recommended Age14+ years

4. Setup

4.1 Battery Installation

  1. Open the battery compartment cover on the rear of the transmitter.
  2. Insert two 18650 batteries or a compatible 2S LiPo battery.
  3. Connect the battery using the appropriate 2S battery balance connector or JST connector.
  4. Close the battery compartment cover securely.
Battery compartment and Type-C port

Image: Battery compartment showing 18650 battery slots and JST connector, along with the Type-C interface.

4.2 Antenna Configuration

The FS-ST16 features a dual-antenna design, including a built-in FPC antenna and a reserved external folding antenna interface. Ensure the external antenna is properly unfolded and positioned for optimal signal reception and transmission.

Dual-antenna design

Image: Illustration of the dual-antenna design with built-in FPC antenna.

Reserved external antenna interface

Image: Close-up of the reserved external antenna interface.

4.3 Receiver Binding

Refer to the Quick Start Guide for detailed instructions on binding the FS-SR8 receiver (or other compatible ANT protocol receivers) to the FS-ST16 transmitter. This process typically involves putting both the transmitter and receiver into binding mode and confirming the connection.

4.4 Throttle Plate Adjustment

The included SetBack Sense Throttle Plate may require installation or adjustment based on your preferred throttle feel and model type. Consult the Quick Start Guide for specific instructions on how to customize the throttle plate.

5. Operating Instructions

5.1 Power On/Off

Press and hold the power button located on the front panel to turn the transmitter ON or OFF. The 3.5-inch IPS display will illuminate upon power-on.

5.2 Navigation and Controls

The FS-ST16 features intuitive controls for navigation and operation:

  • Menu/Exit Buttons: Used to navigate through menus and confirm/cancel selections.
  • Gimbals: High-precision Hall assembly gimbals for precise control.
  • Scroll Wheel: For quick menu navigation and value adjustments.
  • Knobs (VRA, VRB): Assignable rotary knobs for fine-tuning parameters.
  • Switches (SWB, SWC, etc.): Multiple assignable switches for various functions.
  • Multi-type Reset Switch: Located on the rear for quick resets.
FS-ST16 gimbals and central controls

Image: Close-up of the FS-ST16 gimbals and central controls.

High-end configuration controls

Image: Highlighting the Hall assembly seat, full-stroke knob, gear switch, and multi-type reset switch.

5.3 Model Management

The transmitter supports up to 40 sets of model data, allowing you to store configurations for different RC models. Use the display interface to select, create, or modify model profiles.

Model selection and channel monitor display

Image: Display showing model selection (Model 01-40) and channel monitor (CH1-16).

5.4 Parameter Settings

The FS-ST16 offers extensive parameter customization:

  • Dual-Ratio Curves: 10 sets available for precise control adjustments.
  • Flight Modes: 5 sets of flight modes to adapt to different flying conditions.
  • Programmed Hybrid Control: 20 sets for complex mixing.
  • Throttle Curve: 11 adjustable points for fine-tuning throttle response.
  • Adjustable Operation Parameters: Customize various operational aspects to suit your preferences.
Parameter settings and voice broadcasting

Image: Display showing DR (Dual Rate) settings and illustrating live voice broadcasting.

5.5 Advanced Model Functions

The transmitter supports various advanced functions for different model types:

  • Model Type Options: Wing layout (Normal, AIL VATOP), Tail layout (V Tail), Aileron/Flap configurations (1Aileron, 2Aileron, 2Aileron+1Flap, 2Aileron+2Flap).
  • Control Mixes: Aileron differential, Aileron camber flap, Aileron back flap, Aileron to Elevator, Aileron to Rudder.
  • Special Functions: Thro cut, Butterfly.
Multiple model type options

Image: Display showing various model type options and configurations.

Advanced function settings

Image: Display showing advanced function settings like Aileron, Thro cut, and Butterfly.

5.6 Live Voice Broadcasting

The FS-ST16 provides live voice broadcasting for critical information such as voltage, low signal alarms, and function operations, keeping you informed during use.

5.7 Type-C Interface Functions

The USB Type-C port offers multiple functionalities:

  • Firmware Upgrade: Keep your transmitter up-to-date with the latest features and improvements.
  • Model Data Backup: Save and restore your model configurations.
  • 2S Lithium Battery Charging: Conveniently charge compatible 2S LiPo batteries directly through the transmitter.
  • USB Emulator Functions: Use the transmitter as a simulator controller for practice.

5.8 Customizable Hook Design

The multi-functional expandable hook allows for comfortable posture and can be used with control straps or phone holders.

Multi-functional hook design

Image: Demonstrating the multi-functional hook for straps and phone holders.

5.9 Display and Firmware

The 3.5-inch 320*480 full-color high-brightness IPS outdoor display ensures clear visibility even in intense sunlight. The transmitter supports both Flysky OS and open-source firmware like EdgeTX, offering flexibility and customization options.

High-brightness display and open-source support

Image: Displaying the high-brightness IPS screen and indicating support for EdgeTX and Flysky OS.

6. Maintenance

6.1 Cleaning

Regularly clean the transmitter with a soft, dry cloth. Avoid using harsh chemicals or solvents that could damage the casing or screen. Keep the gimbals and switches free from dust and debris.

6.2 Storage

Store the transmitter in a dry place within the recommended temperature range of -10℃ to +60℃ and humidity range of 20% to 95%. Remove batteries if storing for extended periods to prevent leakage.

6.3 Firmware Updates

Periodically check for and install online firmware updates via the USB Type-C port to ensure optimal performance and access to new features. Refer to the official FLYSKY website or the Quick Start Guide for update procedures.

6.4 Battery Care

Always use appropriate charging methods for 18650 batteries or 2S LiPo batteries. Do not overcharge or over-discharge batteries. Dispose of old or damaged batteries responsibly.

7. Troubleshooting

7.1 Transmitter Does Not Power On

  • Ensure batteries are correctly installed and fully charged.
  • Check battery polarity.
  • Verify that the power button is pressed and held sufficiently.

7.2 No Signal or Range Issues

  • Confirm the receiver is properly bound to the transmitter.
  • Ensure both transmitter and receiver antennas are correctly positioned and undamaged.
  • Check for potential interference sources in the operating environment.
  • Verify that the transmitter's RF power settings are appropriate.

7.3 Incorrect Control Response

  • Verify the correct model profile is selected on the transmitter.
  • Check all parameter settings, including dual-rates, trims, and mixes.
  • Ensure gimbals and switches are functioning correctly and not obstructed.
  • Perform a calibration if available in the transmitter's menu.

7.4 Display Issues

  • Ensure the transmitter has sufficient power.
  • If the screen is unresponsive, try restarting the transmitter.
  • If issues persist, contact customer support.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the Quick Start Guide included in your package or visit the official FLYSKY website. You may also contact your point of purchase for assistance.

© 2024 FLYSKY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.