1. Introduction
The QCY SP7 Plus is a versatile portable Bluetooth speaker designed to deliver powerful audio and dynamic lighting effects for both indoor and outdoor environments. Featuring robust sound output, IPX7 water resistance, and extended battery life, it is an ideal companion for music enthusiasts on the go. This manual provides essential information on setting up, operating, maintaining, and troubleshooting your speaker to ensure optimal performance.
2. Package Contents
Please check the package for the following items:
- QCY SP7 Plus Portable Bluetooth Speaker
- USB-C Charging Cable
- User Manual (this document)
3. Product Overview
The QCY SP7 Plus speaker features a cylindrical design with a durable mesh exterior and an integrated carrying strap for portability. It incorporates advanced audio technology and user-friendly controls.
3.1 Key Features
- Powerful Sound: Equipped with 4 driver units, including a 10W tweeter, delivering up to 105dB of sound. Supports Hi-Res and Stereo Sound modes.
- Enhanced Bass: Expert-tuned bass for rich and powerful low frequencies, activatable with a single touch.
- IPX7 Water Resistance: Designed to withstand splashes, rain, and brief immersion in water.
- Dynamic RGB Lighting: Features 16.8 million colors with 15 dynamic RGB lighting modes to create an immersive atmosphere.
- Versatile Connectivity: Bluetooth 5.4 for stable wireless streaming and a TF card slot for local music playback.
- Long Battery Life: Provides up to 14 hours of continuous music playback on a single charge.
- Voice Control: Supports voice assistant functionality when connected to a compatible device.
3.2 Speaker Components and Controls
Refer to the diagram below for an overview of the speaker's physical components and control buttons.

Figure 1: QCY SP7 Plus Speaker Components and Controls
Key Controls:
- Power Button: Turns the speaker on/off.
- Play/Pause Button: Controls music playback and voice assistant.
- Volume Up (+) / Next Track Button: Increases volume and skips to the next track.
- Volume Down (-) / Previous Track Button: Decreases volume and goes to the previous track.
- Mode / RGB Light Button: Cycles through RGB lighting modes and switches between input modes (Bluetooth/TF card).
- USB-C Charging Port: For charging the speaker.
- TF Card Slot: For inserting a MicroSD/TF card for local music playback.
4. Setup Instructions
4.1 Charging the Speaker
- Connect the provided USB-C charging cable to the USB-C port on the speaker.
- Connect the other end of the cable to a compatible USB power adapter (not included) or a computer's USB port.
- The battery indicator lights will show the charging status. Once fully charged, the lights will indicate a full battery.
4.2 Powering On/Off
- To Power On: Press and hold the Power Button for approximately 2-3 seconds until you hear an audible prompt and the indicator lights illuminate.
- To Power Off: Press and hold the Power Button for approximately 2-3 seconds until you hear an audible prompt and the indicator lights turn off.
4.3 Bluetooth Pairing
- Ensure the speaker is powered on and within close proximity (within 1 meter) of your Bluetooth device.
- The speaker will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth indicator light.
- On your smartphone, tablet, or other Bluetooth-enabled device, go to the Bluetooth settings and enable Bluetooth.
- Search for available devices and select "QCY SP7 Plus" from the list.
- Once connected, the Bluetooth indicator light on the speaker will become solid, and you will hear a confirmation sound.
4.4 TF Card Playback
- Ensure the speaker is powered on.
- Insert a MicroSD/TF card (pre-loaded with music files) into the TF card slot on the side of the speaker.
- The speaker will automatically detect the TF card and switch to TF card playback mode. Music will begin playing automatically.
5. Operating Instructions
5.1 Music Playback
- Play/Pause: Press the Play/Pause Button once to play or pause the current track.
- Volume Up: Press the Volume Up (+) Button once to increase the volume.
- Volume Down: Press the Volume Down (-) Button once to decrease the volume.
- Next Track: Press and hold the Volume Up (+) Button for approximately 2 seconds to skip to the next track.
- Previous Track: Press and hold the Volume Down (-) Button for approximately 2 seconds to go back to the previous track.
5.2 RGB Lighting Control
The QCY SP7 Plus features dynamic RGB lighting with 16.8 million colors and 15 modes.

Video: Speaker demonstrating various RGB lighting effects.
- Change Lighting Mode: Press the Mode/RGB Light Button once to cycle through the available RGB lighting modes.
- Turn Off/On Lights: (Specific instruction not provided, typically a long press or cycling through all modes) Continue pressing the Mode/RGB Light Button to turn off the lights or find your preferred mode.
5.3 Switching Input Modes
- Switch Mode: Press and hold the Mode/RGB Light Button for approximately 2 seconds to switch between Bluetooth mode and TF card playback mode.
5.4 Voice Assistant
- Activate Voice Assistant: When connected via Bluetooth, press and hold the Play/Pause Button for approximately 2 seconds to activate your device's voice assistant (e.g., Siri, Google Assistant).
5.5 Bass Boost
The speaker features an expert-tuned bass enhancement. While a dedicated button is not explicitly shown, this feature is typically activated via a specific button press or through the companion app.
- Activate Bass Boost: (Assumption based on product description) Try double-pressing the Play/Pause Button or refer to the QCY app for specific controls.
6. Maintenance
Proper care and maintenance will extend the life of your QCY SP7 Plus speaker.
6.1 Cleaning
- Wipe the speaker with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components.
6.2 Water Resistance Precautions (IPX7)
The speaker is IPX7 rated, offering protection against temporary immersion in water (up to 1 meter for 30 minutes). However, it is important to follow these guidelines:

Video: Speaker demonstrating water resistance.

Figure 2: IPX7 Water Resistance Guidelines
- The IPX7 rating signifies life waterproof, not complete waterproofing for all conditions.
- Avoid prolonged use in water or heavy rain.
- If the speaker gets wet with water or moisture, ensure it is thoroughly dried in a well-ventilated place before further use or charging.
- Do not use high-temperature drying methods (e.g., hair dryer, direct sunlight for extended periods) as this can damage the speaker.
- Ensure the USB-C port cover is securely closed when near water.
6.3 Storage
- Store the speaker in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- If storing for an extended period, charge the battery to approximately 50% to prolong its lifespan.
7. Troubleshooting
If you encounter issues with your QCY SP7 Plus speaker, refer to the following common problems and solutions:
- Speaker does not power on:
- Ensure the battery is charged. Connect the speaker to a power source using the USB-C cable and try again after a few minutes.
- Press and hold the Power button firmly for 3-5 seconds.
- No sound from the speaker:
- Check the volume level on both the speaker and your connected Bluetooth device.
- Ensure the speaker is correctly paired via Bluetooth (solid blue indicator light).
- If using a TF card, ensure it is properly inserted and contains playable music files.
- Try restarting both the speaker and your connected device.
- Cannot pair via Bluetooth:
- Ensure the speaker is in Bluetooth pairing mode (flashing Bluetooth indicator light).
- Turn off and then turn on Bluetooth on your device.
- Move your device closer to the speaker (within 10 meters) and ensure no obstructions.
- Clear previous Bluetooth connections for "QCY SP7 Plus" on your device and attempt to pair again.
- Ensure no other devices are currently connected to the speaker.
- RGB lights not working or stuck:
- Press the Mode/RGB Light Button repeatedly to cycle through the lighting modes.
- Ensure the speaker has sufficient battery charge.
- Poor sound quality or distortion:
- Move the speaker closer to your Bluetooth device and away from potential interference sources (e.g., Wi-Fi routers, microwaves).
- Ensure the audio source file is of good quality.
- Check if the speaker's grille is obstructed.
8. Specifications
The following table outlines the technical specifications of the QCY SP7 Plus Portable Bluetooth Speaker:
| Feature | Specification |
|---|---|
| Brand | QCY |
| Model | SP7 Plus |
| Speaker Type | Portable |
| Sound Mode | Hi-Res Sound Mode, Stereo Sound Mode |
| Input Power | 25-49 W |
| Max Sound Output | 105 dB |
| Driver Units | 4 (including 10W tweeter) |
| Waterproof Rating | IPX7 (Life Waterproof) |
| Communication | Bluetooth 5.4, TF Card |
| Power Source | Battery, USB |
| Battery Life | Up to 14 hours |
| Voice Control | Yes |
| App Support | Yes |
| RGB Lighting | 16.8 million colors, 15 modes |
| Dimensions | Approx. 21.4 cm (length) x 8.2 cm (diameter) |
| Weight | Approx. 620g |
| Origin | Mainland China |
9. User Tips
Maximize your experience with these helpful tips:
- For optimal sound quality, ensure the speaker is placed on a stable surface, allowing the sound to project freely.
- Experiment with different RGB lighting modes to match your environment, mood, or the music genre you are listening to.
- Keep the speaker's firmware updated via the official QCY app (if available) to ensure the best performance, compatibility, and access to new features.
- When using the TF card, organize your music files in the root directory or simple folders for easier navigation.
10. Warranty and Support
For detailed warranty information, product registration, and customer support, please refer to the official QCY website or contact the authorized seller from whom you purchased the product. It is recommended to retain your proof of purchase for any warranty claims or service requests.