QCY SP7 Plus

Contents

QCY SP7 Plus Portable Wireless Bluetooth Speaker User Manual

Model: SP7 Plus

1. Introduction

Thank you for choosing the QCY SP7 Plus Portable Wireless Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. The QCY SP7 Plus is designed for outdoor use, featuring robust sound, IPX7 waterproofing, and dynamic RGB lighting, making it perfect for camping, parties, and other adventures.

QCY SP7 Plus speaker in an outdoor camping setting with warm lighting

The QCY SP7 Plus speaker is ideal for outdoor environments.

2. Package Contents

Please check the package for the following items:

  • QCY SP7 Plus Portable Wireless Bluetooth Speaker
  • USB-C Charging Cable
  • User Manual (this document)
  • Lanyard (may be pre-attached or included separately)

If any items are missing or damaged, please contact your retailer.

3. Product Overview

Familiarize yourself with the speaker's components and controls.

Diagram of QCY SP7 Plus speaker showing buttons, ports, and features

Detailed view of the QCY SP7 Plus speaker's features and controls.

Controls and Ports:

  • Power Button: Press and hold to power on/off.
  • Play/Pause Button: Play or pause music, answer/end calls.
  • Volume Up / Next Track Button: Short press for volume up, long press for next track.
  • Volume Down / Previous Track Button: Short press for volume down, long press for previous track.
  • Mode / Light Button: Switch between Bluetooth/TF card mode, change RGB lighting effects.
  • USB-C Charging Port: For charging the speaker.
  • TF Card Slot: Insert a TF (microSD) card for local music playback.
  • LED Light Ring: Dynamic RGB lighting.
  • Battery Indicator LEDs: Show current battery level.

4. Setup

4.1 Charging the Speaker

  1. Connect the provided USB-C charging cable to the speaker's USB-C port.
  2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
  3. The battery indicator LEDs will show the charging status. Once fully charged, the LEDs will indicate a full battery.

4.2 Powering On/Off

  • To Power On: Press and hold the Power button until you hear an audible prompt and the LED light ring illuminates.
  • To Power Off: Press and hold the Power button until you hear an audible prompt and the LED light ring turns off.

5. Operating Instructions

5.1 Bluetooth Pairing

  1. Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light ring.
  2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  3. Select "QCY SP7 Plus" from the list of devices.
  4. Once paired, you will hear a confirmation sound, and the LED light ring will change its pattern.
  5. The speaker will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is enabled and within range.

5.2 Music Playback

  • Play/Pause: Press the Play/Pause button.
  • Volume Up: Short press the Volume Up button.
  • Volume Down: Short press the Volume Down button.
  • Next Track: Long press the Volume Up button.
  • Previous Track: Long press the Volume Down button.

5.3 Call Handling

  • Answer/End Call: Press the Play/Pause button.
  • Reject Call: Press and hold the Play/Pause button.

5.4 Sound Modes

The speaker supports Immersive Sound Mode and Stereo Sound Mode. Specific button presses to switch between these modes are not detailed, but typically involve the Mode button or a combination of buttons. Refer to the quick start guide for precise instructions if available.

5.5 RGB Lighting Effects

The QCY SP7 Plus features dynamic RGB lighting with 15 different light modes and 16.8 million colors.

  • Change Light Mode: Short press the Mode/Light button to cycle through the available lighting effects.
  • Turn Lights On/Off: Long press the Mode/Light button to toggle the lighting.
QCY SP7 Plus speaker displaying various RGB lighting effects

The speaker features dynamic RGB lighting with multiple modes.

5.6 TF Card Playback

  1. Insert a TF (microSD) card loaded with audio files into the TF card slot.
  2. The speaker should automatically switch to TF card mode. If not, short press the Mode/Light button to switch modes until TF card mode is activated.
  3. Use the Play/Pause, Volume Up/Next Track, and Volume Down/Previous Track buttons to control playback.

5.7 True Wireless Stereo (TWS) Pairing

If you have two QCY SP7 Plus speakers, you can pair them together for a stereo sound experience.

  1. Ensure both speakers are powered on and not connected to any Bluetooth device.
  2. On one speaker (this will be the primary speaker), press and hold the Play/Pause button and the Mode/Light button simultaneously for a few seconds until you hear a TWS pairing prompt.
  3. The speakers will search for each other and automatically pair. Once paired, you will hear a confirmation sound.
  4. Connect your device to the primary speaker via Bluetooth as described in section 5.1.

5.8 Voice Control

The speaker supports voice control. To activate your device's voice assistant (e.g., Siri, Google Assistant), press and hold the Play/Pause button for approximately 2 seconds.

6. Maintenance

6.1 Waterproofing (IPX7)

The QCY SP7 Plus speaker has an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. However, it is important to note the following:

  • This product is designed for life-waterproofing; full submersion for extended periods is not supported.
  • Avoid prolonged use in water or heavy rain.
  • If the speaker gets wet or damp, dry it thoroughly in a well-ventilated area.
  • Do not use high-temperature drying methods (e.g., hair dryer) as this may damage the speaker.
QCY SP7 Plus speaker partially submerged in water, demonstrating IPX7 water resistance

The speaker is IPX7 waterproof, suitable for splashes and brief submersion.

6.2 Cleaning

Wipe the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.

6.3 Storage

Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

7. Troubleshooting

ProblemPossible CauseSolution
Speaker does not power on.Low battery; Power button not held long enough.Charge the speaker fully; Press and hold the Power button for 3-5 seconds.
No sound.Volume too low; Not paired; Incorrect mode.Increase volume on speaker and device; Re-pair via Bluetooth; Ensure correct mode (Bluetooth/TF card).
Cannot pair via Bluetooth.Speaker not in pairing mode; Device Bluetooth off; Too far from device.Ensure speaker is in pairing mode (flashing LED); Turn on device Bluetooth; Move speaker closer to device (within 10m).
TWS pairing fails.Speakers already paired to another device; Incorrect pairing procedure.Disconnect speakers from any devices; Follow TWS pairing steps carefully.

8. Specifications

FeatureDetail
ModelSP7 Plus
Bluetooth Version5.4
Input/OutputUSB (Type-C for charging)
Sound ModeImmersive Sound Mode, Stereo Sound Mode
Speaker TypeOutdoor Speaker
Input Power25-49 W
Voice ControlYes
Waterproof RatingIPX7
App SupportNo
Inbox AdaptorNo
Intelligent Personal AssistantNone (uses device's assistant)
CommunicationBluetooth, TF Card
Power SourceUSB
Battery LifeUp to 14 hours
Max Volume105dB
Frequency Response90Hz-20000Hz
Driver Units4 (including dual woofers and treble unit)
RGB Lighting16.8 million colors, 15 light modes
Internal diagram of QCY SP7 Plus speaker showing 4 driver units including dual woofers and a treble unit

Internal view highlighting the speaker's 4 driver units.

9. User Tips

  • For the best sound experience, ensure the speaker is placed on a stable surface.
  • Experiment with the different RGB lighting modes to match your mood or environment.
  • When using the TF card, ensure your music files are in a compatible format (e.g., MP3, WAV).
  • To maximize battery life, turn off the speaker when not in use.
  • For optimal sound quality, keep the speaker within 10 meters (33 feet) of your paired Bluetooth device.

10. Warranty and Support

QCY products are built with quality and reliability in mind. For warranty information and customer support, please refer to the official QCY website or contact your local distributor. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the QCY official support page or contact their customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.