1. Introduction
Welcome to the EUREKA E6 Plus Robot Vacuum Cleaner and Mop user manual. This guide provides essential information for setting up, operating, and maintaining your new robot vacuum to ensure efficient and effective cleaning of your home. Please read this manual thoroughly before first use and keep it for future reference.
2. Product Overview
Key Features
- Powerful Suction: 5000Pa suction for deep cleaning, effectively removing hair, dirt, dust, and debris from various floor types including vacuum rugs, carpets, wood, laminate, and tile.
- Auto-Emptying Base: Features a 2.5L dust bag in the auto-empty dock, providing up to 60 days of hands-free cleaning.
- Vacuum and Mop in One Pass: Simultaneous vacuuming and mopping with 3 adjustable water levels to customize mopping performance for effective hard floor cleaning.
- Precise LiDAR Navigation: Advanced LiDAR system for fast mapping, accurate navigation, advanced path planning, and efficient cleaning without missing a spot.
- Anti-Hair Tangling Design: A wave-shaped bristle layout on the roller brush prevents hair from getting wrapped, ensuring continuous effective cleaning.
- Smart Control: App control for mapping, scheduling, setting no-go zones, and adjusting water levels. Compatible with voice control via Google Home.
- Threshold Climbing: Capable of overcoming barriers up to 20 mm high for seamless whole-home cleaning.
- Edge Cleaning: Equipped with an advanced PSD sensor to detect edges, ensuring every edge and corner is reliably cleaned.
- Automatic Recharge: The robot automatically returns to its charging base when the battery is low.
What's in the Box
The EUREKA E6 Plus package includes the following components:
- EUREKA E6 Plus Robot Vacuum Cleaner
- Auto-Emptying Base
- Roller Brush
- Mop Stand
- Filter Set
- Side Brush
- Mop
- Dust Bag (Fabric Dust Bag)
- Cleaning Gadget
- 2-in-1 Water Tank
3. Setup
3.1 Unpacking and Placement
- Carefully remove all components from the packaging.
- Choose a suitable location for the auto-empty base. Ensure it is placed against a wall, on a hard, level surface, with at least 0.5 meters (1.6 feet) of clear space on either side and 1.5 meters (5 feet) in front. Avoid areas with direct sunlight or strong Wi-Fi signals that could interfere with the robot.
- Plug the auto-empty base into a power outlet.
- Remove any protective films or stickers from the robot and the base.
3.2 Initial Charging
Place the robot vacuum onto the auto-empty base. Ensure the charging contacts on the robot align with those on the base. The robot will begin charging automatically. For first-time use, fully charge the robot before operation (approximately 4-6 hours).
3.3 App Connection
To unlock the full potential of your EUREKA E6 Plus, connect it to the mobile app:
- Download the "eureka robot" app from your smartphone's app store (available for iOS and Android).
- Open the app and follow the on-screen instructions to create an account or log in.
- Long-press both the power button and the return-to-base button on the robot simultaneously for a few seconds to activate connection mode. The indicator light will flash.
- In the app, select "Add Device" and allow it to discover your new robot vacuum.
- Once found, follow the prompts to connect the robot to your home Wi-Fi network.
- After successful connection, you can initiate your first cleaning cycle through the app.
4. Operating Instructions
4.1 Starting/Pausing/Stopping Cleaning
- Start Cleaning: Press the power button on the robot once, or use the "Clean" button in the app.
- Pause Cleaning: Press the power button on the robot once during operation, or use the "Pause" button in the app.
- Stop Cleaning: Press and hold the power button on the robot for 3 seconds, or use the "Stop" button in the app. The robot will return to its base.
4.2 Cleaning Modes
The E6 Plus supports various cleaning modes, configurable via the app:
- Auto Clean: The robot intelligently maps and cleans your entire home.
- Spot Clean: Directs the robot to clean a specific area more intensely.
- Zone Clean: Define specific zones on the map for the robot to clean.
- Scheduled Clean: Set specific times for the robot to automatically clean.
- Vacuum Only: For dry debris removal.
- Mop Only: For wet mopping (ensure water tank is filled).
- Vacuum & Mop: Simultaneous cleaning for comprehensive floor care.
4.3 App Control Features
- Mapping: The robot creates and stores a map of your home using LiDAR navigation. You can view and edit this map in the app.
- No-Go Zones/Virtual Walls: Draw virtual boundaries on the map to prevent the robot from entering certain areas.
- Water Level Adjustment: Select from 3 adjustable water levels for mopping, depending on your floor type and cleaning needs.
- Suction Power Adjustment: Adjust the suction power for different cleaning scenarios.
- Cleaning History: View past cleaning routes and durations.
4.4 Voice Control
The EUREKA E6 Plus is compatible with Google Home. Link your robot vacuum to your smart home assistant through the respective app settings to control it with voice commands.
4.5 Auto-Empty Function
When the robot returns to its auto-empty base after cleaning, the base will automatically suction the dust and debris from the robot's dustbin into its large 2.5L dust bag. This process typically takes a few seconds and significantly reduces the frequency of manual dustbin emptying.
5. Maintenance
Regular maintenance ensures your EUREKA E6 Plus operates at peak performance.
5.1 Auto-Empty Base Dust Bag Replacement
The 2.5L dust bag in the auto-empty base needs to be replaced approximately every 60 days, depending on usage. The app will notify you when it's full.
- Open the lid of the auto-empty base.
- Carefully remove the full dust bag.
- Dispose of the used dust bag.
- Insert a new dust bag, ensuring it is properly seated.
- Close the lid of the auto-empty base.
5.2 Cleaning Brushes
- Main Roller Brush: Regularly check for tangled hair or debris. Use the included cleaning tool to cut and remove any wrapped hair.
- Side Brushes: Inspect for wear and tear. Remove any tangled hair or debris. Replace if bristles are bent or damaged.
5.3 Cleaning Filters
The HEPA filter should be cleaned regularly and replaced every 3-6 months.
- Remove the dustbin from the robot.
- Take out the filter assembly.
- Tap the filter gently to remove loose dust. Do not wash the HEPA filter with water.
- Reinsert the clean filter and dustbin.
5.4 Cleaning Water Tank and Mop Pad
- Water Tank: Empty any remaining water after each mopping session. Rinse the tank with clean water.
- Mop Pad: Remove the mop pad after each use and wash it. It can be hand-washed or machine-washed. Allow it to air dry completely before reattaching.
5.5 Sensor Cleaning
Wipe all sensors (cliff sensors, wall sensor, charging contacts) on the robot and the charging base with a clean, dry cloth to ensure optimal performance.
6. Troubleshooting
If you encounter issues with your EUREKA E6 Plus, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start or respond. | Low battery; Power switch off; Robot stuck. | Charge the robot; Ensure power switch is ON; Free the robot from obstacles. |
| Poor suction performance. | Full dustbin; Clogged filter; Blocked main brush. | Empty dustbin; Clean/replace filter; Clean main brush. |
| Robot cannot return to charging base. | Base obstructed; Robot too far; Charging contacts dirty. | Ensure clear path to base; Manually place robot on base; Clean charging contacts. |
| Mopping is ineffective or leaves streaks. | Empty water tank; Dirty mop pad; Incorrect water level setting. | Fill water tank; Wash/replace mop pad; Adjust water level in app. |
| App connectivity issues. | Incorrect Wi-Fi password; Router too far; App outdated. | Re-enter Wi-Fi password; Move robot closer to router; Update app. |
| Robot gets stuck frequently. | Small obstacles; Loose cables; Dark surfaces (cliff sensors). | Clear obstacles; Secure cables; Use no-go zones for problematic areas. |
7. Specifications
| Feature | Specification |
|---|---|
| Hign-concerned Chemical | None |
| Weight | 3 - 6 KG |
| Dust Box Capacity (L) | >2 L (Auto-Empty Base) |
| Filter Type | HEPA |
| Size (mm) | 325*320*100 |
| Battery Life | 1 hour and 40 minutes |
| Cleaning Route | Planned Type (LiDAR Navigation) |
| Bag Or Bagless | With Bag (for Auto-Empty Base) |
| Compatible Devices | Google Home |
| Control Method | App |
| Noise Level | 65dB |
| Included Components | Roller Brush, Mop Stand, Filter Set, Side Brush, Mop, Dust Bag |
| Dust Storage Type | Fabric Dust Bag |
| Installation | Robot |
| Power (W) | 500-999W |
| Function | Mopping & Sweeping & Suction Type |
| Origin | Mainland China |
| Voltage | 220 V |
| Remote Control | No |
8. User Tips
- Prepare Your Home: Before cleaning, pick up loose cables, small toys, or other items that could entangle the robot or obstruct its path.
- Regular Map Updates: If you rearrange furniture significantly, consider resetting or updating the map in the app to ensure optimal navigation.
- Water Tank Care: For best mopping results and to prevent odors, use distilled water in the water tank and clean it regularly.
- Dust Bag Monitoring: While the app notifies you, occasionally check the dust bag in the auto-empty base, especially if you have pets or a large home, to ensure it's not overfilled.
- Edge Cleaning: Utilize the edge cleaning feature for thorough cleaning along walls and corners.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official EUREKA website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
