FlySky PL18EV Paladin

Contents

FLYSKY PL18EV Paladin Radio Transmitter

Model: PL18EV Paladin | Brand: FlySky

1. Introduction

The FlySky PL18EV Paladin is an advanced 18-channel radio transmitter designed for precise control of various RC models, including engineering vehicles, simulation ships, and other remote-controlled toys. It features 5D Hall Sensor Gimbals, a 3.5-inch TFT touch screen, and utilizes the AFHDS3 (third-generation automatic frequency hopping digital system) protocol for reliable and interference-free communication. This manual provides detailed instructions for setting up, operating, and maintaining your PL18EV Paladin transmitter.

FlySky PL18EV Paladin Radio Transmitter front view

Figure 1.1: Front view of the FlySky PL18EV Paladin Radio Transmitter.

2. Package Contents

The PL18EV Paladin is available in two editions: Standard and Flagship. Please verify the contents of your package against the list below.

2.1 Standard Edition

  • 1x PL18EV Transmitter (with 301 high frequency, high frequency fixing plate, thin hand grip)
  • 1x FGr12B Receiver
  • 1x Quick Operation Guide
  • 1x Micro USB Cable
  • 1x LOGO Sticker 1 (pure logo)
  • 1x LOGO Sticker 2 (with other designs)
  • 1x PL18 Body Sticker
Standard Edition package contents

Figure 2.1: Contents of the Standard Edition package.

2.2 Flagship Edition

  • 1x PL18EV Transmitter (with 301 high frequency, high frequency fixing plate, thin hand grip, large hand grip)
  • 2x FGr12B + FGr8B Receivers + Cable
  • 1x Wireless Charging Dock
  • 1x Quick Operation Guide
  • 1x Micro USB Cable
  • 3x Toggle Switch Rubber Covers
  • 1x Tray (with hand rest)
  • 1x Tray Strap
  • 1x LOGO Sticker 1 (pure logo)
  • 1x LOGO Sticker 2 (with other designs)
  • 1x PL18 Body Sticker
Flagship Edition package contents

Figure 2.2: Contents of the Flagship Edition package.

2.3 Edition Comparison

The table below highlights the differences between the Standard and Flagship editions:

Type Item Stand Edition Flagship Edition
Transmitter PL18 EV TX 1 1
Receiver FGr12B RX 1 1
FGr8B RX / 1
Thickened handle / 1
Accessories Toggle switch rubber sleeve / 3
Tray (with hand rest) / 1
Tray strap / 1
Channel expansion line / 1
Wireless charging stand / 1
Surrounding Logo Sticker 1 1
Promotional design stickers 1 1
PL18 Body sticker 1 1
Manual Quick Operation Guide 1 1
Packing Color box 1 /
Charge Micro USB cable 1 1

Figure 2.3: Comparison of included items for Standard and Flagship Editions.

3. Key Features

The PL18EV Paladin transmitter is equipped with a range of advanced features for enhanced control and user experience:

3.1 Hardware Highlights

  • 5D Hall Waterproof Rocker + 2 Levers: Provides precise and durable control.
  • Third Rocker: Features one on the left and one longitudinal centering lever for specialized control.
  • Extensive Controls: Includes 6 gear switches (customizable length and reset), 3 knob keys, 2 self-locking buttons, and 8 two-way fine-tuning buttons.
  • 3.5-inch TFT Color Touch Screen: HVGA 320*480 dot matrix LCD with white backlight and capacitive touch for intuitive interaction. Supports both Chinese and English languages.
  • Vibration/Sound Alarm: Adjustable vibration intensity, various alarm sounds, and real voice IC alarms for critical alerts.
  • Dual Antenna: Built-in dual antenna design ensures optimal signal reception without manual adjustment.
  • Large-Capacity Battery: Built-in 1S (3.7V) 4300mAh lithium battery provides over 5.5 hours of operation.
  • Flexible Charging: Supports Micro USB and QI wireless charging.
  • Metal Hall Multi-dimensional Gimbals: Internal bearings and stick made of CNC metal with anodic oxidation. Offers high rotation angle accuracy (0.07 degrees) for delicate control.
Detailed diagram of FlySky PL18EV Paladin features

Figure 3.1: Detailed overview of the PL18EV Paladin's hardware features.

Exploded view of metal Hall gimbals

Figure 3.2: Exploded view illustrating the precision of the metal Hall multi-dimensional gimbals.

Back view of transmitter showing antenna, USB, and battery features

Figure 3.3: Rear view highlighting built-in dual antenna, USB connection, AFHDS3 protocol, and wireless charging capabilities.

3.2 Software Highlights

  • 18 Ratio Channels: Provides extensive control options for complex models.
  • Dual Model Control: Supports dual-model control for versatile applications (e.g., excavator as a model combination).
  • Data Backup and Sharing: Fusi remote control butler enables model data backup and sharing. The transmitter can store up to 20 sets of models.
  • Online Upgrade: Firmware can be updated via USB connection to a computer using the Fusi remote control butler software.
  • Additional Functions: Includes timer, logic switch, and simulator functions.
  • Customizable Functions: All channels support custom function allocation, control, and fine-tuning.
  • Unique Model Functions: Features double ratio curve, delay function, 20 groups of customizable mixing control, and track mixing control.
Iconic features of Paladin EV

Figure 3.4: Visual representation of key features including metal Hall joystick, dual metal toggles, dual 18CH control, mechanical structure, track mixed control, and full-color touch screen.

4. Specifications

4.1 PL18EV Paladin Transmitter

Brand FlySky
Product Model PL18EV
Product Name Paladin EV
Channels 18
Adaptable Receivers All AFHDS 3 receivers
Model Type Engineering vehicles, simulation ships, etc.
RF 2.4GHz
RF Power < 20 dBm
2.4GHz Protocol AFHDS 3
Distance >300m (open without interference ground)
Channel Resolution 4096
Battery 1S (3.7V) * 4300mAh (built-in)
Charging Interface Micro USB/wireless charging
Charging Time 4h@5V*2A (Micro USB) / 7h@5V*2A (wireless charging)
Life Time >5.5h (standard accessories)
Low Voltage Warning < 3.65V
Antenna Type Dual antenna
Display HVGA 3.5 TFT, 320*480
Language Chinese and English
Simulator USB Simulator
Data Interface USB, Non-standard interface (USART), PHJACK (PPM)
Temperature Range -10℃—+60℃
Humidity Range 20%-95%
Online Update Yes
Color Black
Size 120mm*195mm*213 mm
Weight 1012g
Certification CE, FCC ID: N4ZFT1800

4.2 FGr12B Receiver

Model Type FGr12B
PWM Channels 12
RF 2.4GHz ISM
2.4GHz Protocol AFHDS 3
Distance >500m (open without interference ground)
Antenna Type Single antenna
Power 3.5V-9V
RSSI Yes
Data Interface i-BUS/S.BUS/PPM/PWM
Temperature Range -10℃—+60℃
Humidity Range 20%-95%
Online Update Yes
Size 37mm*25mm*17.5mm
Weight 11.2g
Certification CE, FCC ID: N4ZFGR12B
FlySky PL18EV Paladin transmitter with FGr12B and FGr8B receivers

Figure 4.1: PL18EV Paladin transmitter shown with FGr12B and FGr8B receivers.

5. Setup

5.1 Initial Charging

Before first use, ensure your PL18EV Paladin transmitter is fully charged. Connect the transmitter to a power source using the provided Micro USB cable. Alternatively, if you have the Flagship Edition, place the transmitter on the wireless charging dock. The charging time is approximately 4 hours via Micro USB (at 5V*2A) or 7 hours via wireless charging (at 5V*2A).

5.2 Receiver Binding

The PL18EV Paladin is compatible with all AFHDS 3 receivers. To bind a receiver to your transmitter:

  1. Ensure both the transmitter and receiver are powered off.
  2. Connect the receiver to power.
  3. Press and hold the bind button on the receiver (refer to receiver manual for exact location).
  4. Power on the transmitter.
  5. The binding process should complete automatically. Refer to the Quick Operation Guide for detailed steps specific to your receiver model.
PL18EV optional accessories and compatible receivers

Figure 5.1: Overview of optional accessories and compatible receivers for PL18EV.

5.3 Simulator Connection

The transmitter supports USB simulator functionality. Connect the PL18EV to your computer via a USB cable to use it with compatible flight or driving simulators. This allows for practice and familiarization with controls without risking your physical model.

6. Operating Instructions

The PL18EV Paladin offers a highly customizable and intuitive operating experience through its touch screen and various physical controls.

6.1 Touch Screen Interface

The 3.5-inch TFT touch screen provides access to all transmitter settings and functions. Navigate through menus by tapping and swiping. Key interface elements include:

  • Sensors: Monitor real-time data such as TX voltage and channel outputs.
  • Work Mode: Configure specific operational modes for your model, including channel assignments and mixing.
  • Track Mixing: Adjust track mixing parameters for models like excavators or tanks, allowing for synchronized and independent track control.
  • Model Structure: Define and modify the functional structure of your model, including steering, left/right track, and other custom functions.
  • Function Assignment: Assign functions to various switches, knobs, and gimbals.
  • Models: Manage and select from up to 20 stored model configurations.
  • RX Setup: Configure receiver settings.
  • End Points: Adjust channel end points.
  • Subtrim, Conditions, Trims, Rate and Exp, Throttle Curve: Fine-tune control parameters for optimal performance.
  • Channels Offset, Channels Delay, Mixes, RF Setup, System, Help Center: Access advanced settings and support.
Paladin EV interface examples showing various settings screens

Figure 6.1: Examples of the PL18EV Paladin's touch screen interface, including sensor data, work mode, track mixing, and model structure settings.

6.2 Physical Controls

The transmitter features a comprehensive array of physical controls for direct manipulation:

  • Hall Sensor Gimbals: Provide smooth, precise, and durable control for primary movements.
  • Dual Metal Toggles with Self-Return: Specifically designed for track models, allowing for easy switching between different control modes.
  • Multi-Type Switches: Customizable 2 or 3 position switches with self-return and non-self-return options.
  • Knob Keys: Three adjustable knob keys for proportional control.
  • Self-Locking Buttons: Two buttons for momentary or latching functions.
  • Fine-Tuning Buttons: Eight two-way buttons for precise adjustments during operation.
Paladin EV with detailed callouts for physical controls and screen functions

Figure 6.2: Detailed diagram illustrating the various physical controls and their functions on the PL18EV Paladin transmitter.

7. Maintenance

Proper maintenance will ensure the longevity and optimal performance of your PL18EV Paladin transmitter:

  • Cleaning: Use a soft, dry cloth to clean the transmitter. Avoid using solvents or abrasive cleaners. For the screen, use a microfiber cloth.
  • Storage: Store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures. The recommended temperature range for operation and storage is -10℃ to +60℃, with humidity between 20%-95%.
  • Battery Care: Avoid fully discharging the built-in lithium battery. If storing for extended periods, charge the battery to approximately 50-60% capacity.
  • Firmware Updates: Regularly check for and install firmware updates via the Fusi remote control butler to ensure the best performance and access to new features.
  • Physical Inspection: Periodically inspect gimbals, switches, and buttons for any signs of wear or damage.

8. Troubleshooting

This section addresses common issues you might encounter with your PL18EV Paladin transmitter.

  • Transmitter Not Powering On:
    • Check battery level. Recharge the transmitter if the battery is low.
    • Ensure the power button is pressed correctly.
  • Receiver Not Binding:
    • Ensure both transmitter and receiver are using the AFHDS 3 protocol.
    • Verify the binding procedure is followed correctly as per Section 5.2.
    • Check that the receiver is powered on and within range.
  • Loss of Control/Interference:
    • Ensure the transmitter is within the specified operating distance (>300m for transmitter, >500m for receiver in open ground).
    • Avoid operating near strong electromagnetic interference sources.
    • Check for any physical obstructions between the transmitter and receiver.
  • Low Voltage Warning:
    • The transmitter will issue a warning if the battery voltage drops below 3.65V. Recharge immediately to prevent loss of power during operation.
  • Touch Screen Unresponsive:
    • Ensure the screen is clean and dry.
    • Restart the transmitter.
    • If the issue persists, consider performing a firmware update.

For further assistance, please refer to the Quick Operation Guide or contact customer support.

9. Warranty and Support

The FlySky PL18EV Paladin transmitter is certified with CE and FCC ID: N4ZFT1800, and the FGr12B receiver with CE and FCC ID: N4ZFGR12B, indicating compliance with relevant safety and performance standards.

For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, firmware updates, and additional resources, please visit the official FlySky website or contact their customer service department.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.