VGR V-698 Professional Cordless Hair Clipper User Manual

1. Introduction

Thank you for choosing the VGR V-698 Professional Cordless Hair Clipper. This multi-functional grooming tool is designed for precise and efficient hair trimming, offering a comfortable and reliable user experience. Please read this manual thoroughly before first use to ensure proper operation and maintenance.

2. Package Contents

The VGR V-698 Hair Clipper package includes the following items:

Electric Hair Clipper (VGR V-698) x 1
Instruction Manual x 1
Cleaning Brush x 1
USB Charging Cable x 1
Cutting Guide Combs x 4 (3mm, 6mm, 9mm, 12mm)
Lubricating Oil (Note: Due to logistics restrictions, lubricating oil may not be included in all packages. If not included, please use standard clipper oil.)

VGR V-698 Hair Clipper and accessories — Image 2.1: VGR V-698 Hair Clipper with included accessories and charging base.

3. Specifications

Feature	Detail
Model	V-698
Blade Material	Stainless Steel (Ceramic and Powder Metallurgic Blade)
Appearance Material	ABS Resin
Power Mode	USB Universal
Cleaning Method	Blade Head Water Washing
Battery Capacity	2000mAh Lithium Battery
Charging Time	Approximately 2.5 hours
Operating Time	Approximately 200 minutes
Voltage	100-240V
Power	5W
Motor Type	Brush Motor
Cutting Guide Combs	3mm, 6mm, 9mm, 12mm

2000mAh High Capacity Lithium Battery details — Image 3.1: Battery specifications showing 2.5 hours charge time for 200 minutes work time.

4. Setup and Charging

4.1 Initial Charge

Before first use, fully charge the hair clipper. The device features two charging methods:

Direct USB Charging: Connect the USB charging cable directly to the clipper's charging port and a compatible USB power adapter (not included).
Charging Base: Place the clipper into the provided charging base, then connect the USB charging cable to the base and a compatible USB power adapter.

A full charge takes approximately 2.5 hours. The LED display will indicate the charging status and remaining power.

Two charging methods: direct USB and charging base — Image 4.1: Illustration of host charging (direct USB) and base charging.

4.2 Attaching Guide Combs

To achieve desired hair lengths, attach one of the four cutting guide combs (3mm, 6mm, 9mm, 12mm) to the clipper head. Ensure the comb is securely fastened before use.

Cutting guide combs with lengths 3mm, 6mm, 9mm, 12mm — Image 4.2: The four included guide combs and their respective cutting lengths.

5. Operating Instructions

5.1 Power On/Off

Press the power button located on the clipper to turn the device ON or OFF. The LED display will illuminate upon activation.

5.2 Blade Length Adjustment

The clipper features a zoom wheel for fine-tuning the blade length between 0.8mm and 2.0mm. Rotate the wheel to select your desired cutting length. This adjustment works in conjunction with or without guide combs for precise styling.

Blade length adjustment wheel from 0.8mm to 2.0mm — Image 5.1: Detail of the zoom wheel for blade length adjustment (0.8mm - 2.0mm).

5.3 Speed Adjustment (Turbo Function)

The clipper offers a two-gear speed adjustment. Tap the power button to cycle between the standard and turbo speed settings. The LED display will indicate the active speed mode.

Turbo function button for two-gear speed adjustment — Image 5.2: The power button also controls the two-gear speed adjustment (Turbo Function).

5.4 LED Display Indicators

The intelligent LED digital display provides important information:

Power Level: Shows the remaining battery percentage.
Charging Status: Indicates when the device is charging.
Turbo Mode: Lights up when the higher speed setting is active.
Oil Reminder: Prompts you to add oil to the blades for optimal performance.

LED display showing power, status, and turbo indicators — Image 5.3: Detailed view of the LED display indicators.

6. Maintenance

6.1 Cleaning the Blade Head

The blade head is washable for easy cleaning. After each use:

Turn off the clipper.
Carefully detach the cutting head from the main body.
Use the provided cleaning brush to remove any loose hair from the blades and inside the clipper head.
Rinse the detached blade head under running water. Ensure no water enters the main body of the clipper.
Allow the blade head to air dry completely before reattaching it to the clipper.

Detachable cutting head for cleaning — Image 6.1: The detachable cutting head for easy cleaning.

Blade being rinsed under water — Image 6.2: Illustration of rinsing the blade head under water.

6.2 Oiling the Blades

Regular oiling ensures optimal cutting performance and extends the life of your blades. Apply a few drops of lubricating oil (if available, or standard clipper oil) to the blades after every few uses, or when the LED display indicates an oil reminder. Turn the clipper on for a few seconds to distribute the oil evenly.

7. Troubleshooting

Problem	Possible Cause	Solution
Clipper does not turn on.	Low battery or no charge.	Charge the clipper fully (approx. 2.5 hours).
Poor cutting performance / pulling hair.	Blades are dull, dirty, or not oiled.	Clean the blades thoroughly and apply lubricating oil. If blades are dull, consider professional sharpening or replacement.
Clipper makes unusual noise.	Blades may be misaligned or require oiling.	Ensure blades are properly aligned and oiled. If the issue persists, contact customer support.
LED display not working.	Device malfunction or low battery.	Charge the clipper. If the problem continues, contact customer support.

8. User Tips

For best results, always start with clean, dry hair.
Use the appropriate guide comb for your desired hair length.
Always move the clipper against the direction of hair growth for an even cut.
Utilize the turbo function for thicker hair or faster cutting.
Pay attention to the LED oil reminder to keep your blades in top condition.
Store the clipper in a dry place, away from direct sunlight and moisture.

9. Warranty and Support

VGR products undergo rigorous quality control and are 100% tested before shipping to ensure perfect condition. In the unlikely event of a product defect or damage due to shipping, please contact the seller or VGR customer support immediately. Ensure the item is in its original condition when reporting issues.

For any inquiries or assistance, please refer to the contact information provided with your purchase or visit the official VGR website.

	VGR V-990 Cordless Hair Trimmer User Guide Comprehensive guide to using the VGR V-990 professional cordless hair trimmer, featuring 8000RPM, barber-grade performance, and easy hair cutting for men.
	VGR V-282 Professional Hair Clipper User Manual and Specifications Comprehensive user manual for the VGR V-282 Voyager Professional Hair Clipper. Includes detailed information on components, safety instructions, usage, charging, maintenance, technical features, and disposal guidelines.
	VGR V-2821 Professional Hair Clipper User Manual and Features Detailed information about the VGR V-2821 Professional Hair Clipper, including components, safety warnings, usage instructions, cleaning, maintenance, and technical specifications. Supports corded and cordless use.
	VGR V-085 Professional Hair Trimmer Manual and Safety Instructions This document provides comprehensive safety instructions, components list, usage guidelines, cleaning and maintenance procedures, and technical specifications for the VGR V-085 Professional Hair Trimmer.
	VGR V-085 Professional Hair Trimmer User Manual & Safety Instructions This document provides comprehensive safety instructions, component descriptions, usage guidelines, charging, cleaning, and maintenance information for the VGR V-085 Professional Hair Trimmer.
	VGR V-906 Professional Hair Trimmer User Manual Comprehensive user manual for the VGR V-906 electric hair trimmer, detailing features, operation, charging, maintenance, and troubleshooting for professional and home grooming.

VGR V-698