1. Introduction
Thank you for choosing the PISEN LiFePO4 Battery 1000W Portable Power Station. This device is designed to provide reliable and efficient power for various applications, from outdoor adventures to household emergencies. Featuring advanced LiFePO4 battery technology, multiple output options, and robust safety features, this power station ensures a stable and safe power supply for your electronic devices and appliances.
2. Safety Information
Please read all safety instructions carefully before using the power station to prevent injury or damage to the unit. Keep this manual for future reference.
General Safety Precautions:
- Do not disassemble, repair, or modify the unit.
- Keep the unit away from fire, water, and extreme temperatures.
- Do not expose the unit to direct sunlight for prolonged periods.
- Ensure proper ventilation during use and charging.
- Use only approved charging cables and adapters.
- Keep out of reach of children and pets.
Battery Management System (BMS):
The PISEN Power Station is equipped with an automotive-level Battery Management System (BMS) that provides comprehensive protection, including:
- Over Current Protection
- Over Voltage Protection
- Over Temperature Protection
- Short Circuit Protection
- Over Discharge Protection
- Over Load Protection
These protections ensure safe and reliable operation of the device.
Figure 2.1: LiFePO4 Battery and Safety Features Overview
3. Product Overview
The PISEN 1000W Portable Power Station is designed for versatility and ease of use, featuring a robust build and multiple power output options.
Key Features:
- 1000W High Power Output: Supports 99% of electrical appliances.
- 1008Wh LiFePO4 Battery: High energy density, 3000+ cycles for long-lasting energy.
- Bidirectional Inverter Technology: Supports direct charging from mains power without extra adapters.
- Pure Sine Wave Output: Ensures no damage to sensitive electrical appliances.
- Multiple Output Ports: 6 kinds of output, allowing up to 10 devices to be used simultaneously.
- Fast Charging: Fully charged in approximately 1.5-2 hours via AC (800W Max) or 5-7 hours via solar panel (200W Max).
- UPS Function: Switches to power station supply within 10ms during sudden power failure.
- Integrated LED Light: 1.5W Max, with low light, high light, and SOS modes. Features magnetic attachment for convenience.
Component Diagram:
Figure 3.1: Power Station Interfaces
- AC Output x2 (230V/1000W)
- DC5521 Output x2 (12V-10A 120W Max)
- Type-C1 (PD100W, Unidirectional)
- Type-C2 (PD20W)
- USB-A1 (QC18W)
- USB-A2 (QC18W)
- Cigarette Lighter Output x1 (13.2V-10A 132W)
Figure 3.2: Detailed Features
- Comfortable handle design
- LED screen real-time display
- Charging interface protected by a cover
- Dual silent fan active cooling system
- Independent power switch
- Overcurrent protection button
Video 3.1: PISEN Power Station Product Demonstration
4. Specifications
| Attribute | Value |
|---|---|
| Product Name | PISEN Super Fast Charging Power Station 1000W |
| Model | TS-OPS02 |
| Battery Capacity | 1008Wh |
| Battery Type | 3.2V lithium iron phosphate (LiFePO4) |
| Rated Capacity | 45000mAh/22.4V |
| AC Input | 800W Max (Fully charged in ~1.5 hours) |
| Solar Input (XT60 interface) | 10-30V DC 200W Max (Fully charged in ~5-6 hours) |
| Vehicle Power Adapter Input | 12V 10A 120W Max (Fully charged in ~10 hours) |
| AC Output | Rated power 1000W, Maximum constant power output 1800W |
| AC Output 2 (European Spec) | 230V/50Hz |
| Output Waveform | Pure Sine Wave |
| DC Output | DC5521x2: 12V-10A 120W MAX |
| Type-C1 Output | PD100W (Unidirectional) |
| Type-C2 Output | PD20W |
| USB-A1 Output | QC18W |
| USB-A2 Output | QC18W |
| Operating Temperature | Charging temperature: 0°C~40°C |
| Discharge Temperature | -20°C~45°C |
| Product Weight | 10.8KG |
| Product Size | 366*230*224mm |
| Rated Power | 1000W |
| Peak Power | 2000W |
| Other | Magnetic suction lamp: 1.5W MAX |
Figure 4.1: Regional Specifications
5. Setup
Unpacking:
Carefully remove the power station and all accessories from the packaging. Verify that all components are present:
- PISEN Outdoor Power Station x1
- AC charging cable x1
Initial Charging:
Before first use, it is recommended to fully charge the power station.
Figure 5.1: Charging Methods and Times
- AC Charging: Connect the provided AC charging cable to the power station's AC input port and then to a wall outlet. The LED screen will indicate charging status. Charging time is approximately 1.5-2 hours (800W Max).
- Solar Charging: Connect a compatible solar panel (XT60 interface, 10-30V DC 200W Max) to the power station's solar input port. Ensure the solar panels are placed in direct sunlight for optimal charging. Charging time is approximately 5-7 hours (200W Max).
- Car Charging: Connect the car charging cable (12V 10A DC 120W Max) to the power station's car charging input and your vehicle's cigarette lighter socket. Charging time is approximately 10 hours.
6. Operating Instructions
Powering On/Off:
- Press and hold the main POWER button for a few seconds to turn the unit on or off.
- The LED screen will illuminate, displaying battery level, output/input wattage, and other status indicators.
Using Output Ports:
To use a specific output type (AC, DC, USB), press the corresponding power button for that section. The button will light up to indicate it's active.
- AC Output: Plug your AC appliances into the AC outlets. Ensure the total power consumption does not exceed 1000W (1800W peak).
- DC Output: Connect your 12V DC devices to the DC5521 ports or the cigarette lighter output.
- USB Output: Connect your USB-powered devices to the USB-A (QC18W) or Type-C (PD100W/PD20W) ports.
LED Light Function:
Figure 6.1: Magnetic LED Light in Use
The power station includes a magnetic LED light. To use it:
- Remove the LED light from its slot on the power station.
- Press the button on the LED light to cycle through low light, high light, and SOS modes.
- The magnetic base allows it to be attached to metallic surfaces for hands-free illumination.
UPS Function:
Figure 6.2: UPS Technology
When the power station is connected to an AC wall outlet and also has devices connected to its AC output, it can function as an Uninterruptible Power Supply (UPS). In case of a sudden power outage, the system will automatically switch to battery power within 10ms, ensuring continuous operation for connected devices.
7. Maintenance
Cleaning:
- Use a dry, soft cloth to clean the exterior of the power station.
- Do not use abrasive cleaners or solvents.
- Keep the ventilation grilles clear of dust and debris to ensure proper cooling.
Storage:
- Store the power station in a cool, dry place, away from direct sunlight and extreme temperatures.
- For long-term storage, charge the unit to approximately 50-80% every 3-6 months to prolong battery life.
- Avoid storing the unit in a completely discharged state.
Battery Care:
- The LiFePO4 battery is designed for long life (3000+ cycles).
- Avoid fully discharging the battery frequently, as this can reduce its overall lifespan.
- Operate the unit within the recommended temperature ranges (Charging: 0°C~40°C, Discharge: -20°C~45°C).
8. Troubleshooting
If you encounter issues with your PISEN Power Station, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | Battery is completely discharged. | Connect to AC power and charge for at least 30 minutes before attempting to power on. |
| No output from AC ports | AC output not activated. Overload protection triggered. | Press the AC power button to activate. Reduce the load if an overload indicator is shown. Restart the unit. |
| Slow charging via solar panel | Insufficient sunlight. Incorrect panel voltage/wattage. | Ensure panels are in direct sunlight and angled correctly. Verify solar panel specifications (10-30V DC, 200W Max). |
| Unit overheats | Blocked ventilation. Excessive load. | Ensure vents are clear. Reduce connected load. Move to a cooler environment. |
| LED screen not displaying correctly | Temporary software glitch. | Power off the unit, wait 1 minute, then power on again. |
If the problem persists after trying these solutions, please contact customer support.
9. User Tips
While specific user reviews or Q&A were not provided for this manual, here are some general tips to enhance your experience with the PISEN Portable Power Station:
- Optimize Solar Charging: Angle your solar panels directly towards the sun for maximum efficiency, especially during peak daylight hours.
- Manage Power Consumption: Prioritize charging essential devices first. For longer trips, consider bringing a solar panel for continuous recharging.
- Regularly Check Battery Level: Keep an eye on the LED display to monitor the remaining battery capacity, especially when powering high-wattage devices.
- Utilize Magnetic Light: The detachable magnetic LED light is very versatile. Use it for hands-free lighting during camping, car repairs, or as an emergency light.
- Keep Ports Covered: When not in use, ensure the charging interface cover is closed to protect against foreign matter and moisture.
10. Warranty & Support
PISEN offers a 3-year worry-free care period for this product. For detailed warranty information, service requests, or technical support, please contact PISEN customer service through the following channels:
- Email: 1494945259@qq.com
- WhatsApp: +86 19526406295
Please have your product model (TS-OPS02) and purchase date available when contacting support.
