1. Introduction
Thank you for choosing the Baseus AirGo AS01 Ear Clip Earphones. These wireless earbuds are designed to provide a comfortable, stable, and high-quality audio experience, featuring advanced Bluetooth 5.3 connectivity, dual-mic Environmental Noise Cancellation (ENC) for clear calls, and Baseus Directional Conduction Technology for reduced sound leakage. This manual will guide you through the setup, operation, and maintenance of your new earphones.

2. Package Contents
Please check the package for the following items:
- Baseus AirGo AS01 Ear Clip Earphones (Left and Right)
- Charging Case
- USB-C Charging Cable
- User Manual (this document)

3. Product Overview
The Baseus AirGo AS01 earphones feature an ergonomic ear clip design for comfort and stability, weighing approximately 5g per earbud. They incorporate Baseus Directional Conduction Technology to minimize sound leakage and a 10mm composite diaphragm for enhanced audio performance, especially in low frequencies.


4. Getting Started
4.1 Charging the Earphones and Case
Before first use, fully charge the earphones and the charging case.
- Place the earphones into the charging case.
- Connect the USB-C charging cable to the charging port on the case and a power source.
- The indicator light on the case will show charging status. A full charge provides up to 25 hours of total listening time with the charging case, and approximately 6 hours on a single earbud charge.
- A 10-minute charge can provide up to 2 hours of listening time thanks to Baseus Rapid Charge technology.

4.2 Pairing with a Device
- Open the charging case. The earphones will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for "Baseus AirGo AS01" in the list of available Bluetooth devices and select it to connect.
- Once connected, you will hear an audio prompt, and the indicator light on the earphones will change.
The earphones use a Bluetooth 5.3 chip for stable and efficient connectivity.

5. Operating Instructions
5.1 Touch Controls
The Baseus AirGo AS01 earphones feature sensitive touch controls on each earbud:
- Play/Pause: Press twice (L or R earbud)
- Previous Track: Press and hold L earbud for 1.5 seconds
- Next Track: Press and hold R earbud for 1.5 seconds
- Decline Call: Press and hold L or R earbud for 1.5 seconds
- Answer/Hang Up Call: Press twice (L or R earbud)

5.2 Dual-Mic ENC for HD Calls
The earphones are equipped with a dual-mic ENC (Environmental Noise Cancellation) system and a call noise reduction algorithm. This enhances call quality by providing more clarity and reducing background noise, ensuring your voice is heard clearly even in noisy environments.

5.3 Dual-Device Smart Connect
With Baseus Smart Connect technology, the earphones can be paired with two devices simultaneously. They will automatically switch the connection to your communication device when a call comes in, ensuring you don't miss important phone calls while enjoying media on another device.

5.4 Low-Latency Gaming
The Baseus Dual-Channel Low-Latency technology provides an ultra-low latency of 0.06s, enhancing your gaming experience by shortening response times and improving audio-visual synchronization.

5.5 Baseus App Customization
Download the Baseus App to unlock additional features and customization options, including button customization, earbud location tracking, and 12 EQ presets to tailor your listening experience.

6. Maintenance and Care
- Keep the earphones and charging case clean and dry.
- Avoid extreme temperatures and direct sunlight.
- Do not expose the device to water or excessive moisture.
- Use a soft, dry cloth to clean the earbuds and charging contacts.
- Store the earphones in their charging case when not in use to protect them and keep them charged.
7. Troubleshooting
| Problem | Solution |
|---|---|
| Earphones not pairing | Ensure earphones are charged. Place them back in the case, close, then open again to re-enter pairing mode. Turn off and on Bluetooth on your device. |
| No sound from one earbud | Check battery level. Try resetting the earphones (refer to Baseus App or online support for specific reset instructions). Re-pair with your device. |
| Poor call quality | Ensure earbuds are properly worn. Move to an area with less background noise. Check device's microphone settings. |
| Charging issues | Check the USB-C cable and power adapter. Ensure charging contacts on earbuds and case are clean. |
8. Specifications
| Attribute | Value |
|---|---|
| Product Name | Baseus TWS True Wireless Bluetooth Earbuds |
| Model Number | Baseus AirGo AS01 |
| Material | ABS+PC (PVC, Plastic) |
| Bluetooth Version | V5.3 |
| Communication Distance | Approx. 10 meters |
| Suitable for | Playback devices with Bluetooth function |
| Listening Time (70% volume) | Approx. 6 hours |
| Listening Time with Charging Case | Approx. 25 hours |
| Charging Port | Type-C |
| Charging Time | Approx. 1.5 hours |
| Headset Battery Capacity | 40mAh/0.148Wh |
| Charging Case Battery Capacity | 400mAh/1.48Wh |
| Charging Case Rated Input | DC5V ⎓ 400mA |
| Earbuds Rated Input | DC5V ⎓ 80mA |
| Frequency Range | 20Hz-20kHz |
| Active Noise-Cancellation | Yes (ENC) |
| Volume Control | Yes |
| Control Button | No (Touch Controls) |
| Vocalism Principle | Air Vocalism Principle |
| Style | Wireless Ear Clip |
*All data provided by Baseus Laboratory; actual performance may vary.
9. User Tips
- For optimal sound quality and comfort, ensure the ear clips are properly adjusted to your ear shape.
- Utilize the Baseus App to customize EQ settings and touch controls to match your preferences.
- When using for calls, the dual-mic ENC works best in moderately noisy environments to isolate your voice.
- Take advantage of the dual-device connection feature for seamless transitions between media and calls.
10. Warranty and Support
Baseus products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Baseus website or contact your local distributor. Keep your purchase receipt as proof of purchase.
11. Product Video
Watch the official product video for a visual guide on features and usage: