FLYSKY FS-CAT01

Contents

FLYSKY FS-CAT01 Altitude Sensor User Manual

Real-time Altitude Monitoring for RC Models

1. Product Overview

The FLYSKY FS-CAT01 is a reliable altitude monitoring sensor designed for use with compatible FLYSKY transmitters. This telemetry sensor provides real-time height information of your model, enhancing flight awareness and control.

Key Features:

  • Compact and lightweight design.
  • Provides real-time altitude data to the transmitter's display.
  • Equipped with Micro Molex input and output connectors for easy integration.
  • Compatible with FLYSKY FS-i6, FS-i8, FS-i10, NV14, and PL18 transmitters.
FLYSKY FS-CAT01 Altitude Sensor front view

Figure 1: Front view of the FS-CAT01 Altitude Sensor.

2. Specifications

AttributeValue
Brand NameFlySky
Item NameFS-CAT01 Altitude Sensor
Model NumberCAT01
Dimensions31 * 15 * 8.5mm
Weight5.3g
Altitude Measurement Range0-8000m / 40-100kPa
Power Input4.0-8.4V
Working Current5mA
Data Porti.bus / (sens)
Temperature Range0 ℃ - + 60 ℃
Humidity Range20% - 95%
MaterialComposite Material
For Vehicle TypeHelicopters (and other RC models)
Recommended Age14+y

3. Setup and Installation

Follow these steps to properly install the FS-CAT01 Altitude Sensor into your RC model and connect it to your FlySky receiver.

  1. Mounting the Sensor: Choose a secure location within your RC model, away from major heat sources or strong vibrations. The sensor is lightweight, so adhesive foam tape or a small zip tie can be used for mounting. Ensure the sensor is oriented correctly, though for altitude sensing, orientation is less critical than for other sensors.
  2. Connecting to the Receiver: The FS-CAT01 sensor connects to the i.bus or SENS port on your compatible FlySky receiver.
    • Locate the i.bus or SENS port on your FlySky receiver.
    • Connect the sensor's output cable to this port. The connector is a Micro Molex type.
    • Ensure the connection is firm and secure.
  3. Power Supply: The sensor operates on a voltage range of 4.0-8.4V, typically supplied directly from the receiver. Ensure your receiver is powered within this range.
  4. Transmitter Compatibility: The sensor is designed to work with FlySky transmitters such as the FS-i6, FS-i8, FS-i10, NV14, and PL18. Ensure your transmitter supports telemetry and is updated to the latest firmware if necessary.
Connection diagram of FS-CAT01 to receiver

Figure 2: Basic connection of the FS-CAT01 sensor to a FlySky receiver's SENS port.

Diagram showing FS-CAT01 connected to receiver and data displayed on transmitter

Figure 3: Illustration of the sensor connected to the receiver, transmitting data to the transmitter display.

4. Operating Instructions

Once the FS-CAT01 Altitude Sensor is correctly installed and connected, it will automatically begin transmitting altitude data to your compatible FlySky transmitter.

  1. Power On: Power on your RC model and then your FlySky transmitter.
  2. Access Telemetry Data: Navigate to the telemetry display or sensor data screen on your transmitter. The exact steps may vary depending on your specific FlySky transmitter model. Refer to your transmitter's user manual for detailed instructions on accessing telemetry data.
  3. Monitor Altitude: The altitude data from the FS-CAT01 sensor should now be visible on your transmitter's display, providing real-time height information.
Transmitter display showing altitude data from FS-CAT01

Figure 4: Example of altitude data displayed on a FlySky transmitter.

Detailed connection and data flow from FS-CAT01 to transmitter

Figure 5: Comprehensive diagram illustrating the data flow from the FS-CAT01 sensor through the receiver to the transmitter.

5. Maintenance

The FS-CAT01 Altitude Sensor is designed for durability, but proper care will ensure its longevity and accurate performance.

  • Environmental Conditions: Operate and store the sensor within the specified temperature range of 0 ℃ to +60 ℃ and humidity range of 20% to 95%.
  • Physical Protection: Avoid exposing the sensor to excessive moisture, dust, or direct physical impact.
  • Cleaning: If necessary, gently clean the sensor with a soft, dry cloth. Do not use solvents or abrasive cleaners.
  • Cable Integrity: Regularly inspect the connection cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.

6. Troubleshooting

If you encounter issues with your FS-CAT01 Altitude Sensor, refer to the following troubleshooting tips:

ProblemPossible CauseSolution
No altitude data on transmitter display
  • Incorrect connection to receiver.
  • Insufficient power to the sensor/receiver.
  • Transmitter not configured for telemetry.
  • Incompatible transmitter firmware.
  • Damaged sensor or cable.
  • Verify the sensor is securely connected to the i.bus/SENS port.
  • Ensure the receiver is receiving adequate power (4.0-8.4V).
  • Check your transmitter's manual for telemetry setup instructions.
  • Update your transmitter's firmware to the latest version.
  • Inspect the sensor and cable for visible damage.
Inaccurate or fluctuating altitude readings
  • Environmental interference (e.g., strong air currents, pressure changes).
  • Sensor not mounted securely.
  • Sensor exposed to direct sunlight or rapid temperature changes.
  • Ensure the sensor is mounted in a stable environment within the model.
  • Verify secure mounting to minimize vibration effects.
  • Avoid placing the sensor in areas with extreme temperature fluctuations.

7. User Tips

Based on general usage practices for similar RC telemetry sensors:

  • Pre-Flight Check: Always perform a pre-flight check to ensure the sensor is connected and transmitting data correctly before each flight.
  • Firmware Updates: Keep your FlySky transmitter's firmware updated to ensure optimal compatibility and performance with telemetry sensors.
  • Mounting Location: While altitude sensors are less sensitive to orientation, ensure it's not obstructed by other components that might affect air pressure readings.

Note: No specific user tips were available from provided reviews or Q&A data.

8. Warranty and Support

For warranty information, technical support, or service inquiries regarding your FLYSKY FS-CAT01 Altitude Sensor, please refer to the official FLYSKY website or contact your authorized dealer.

Always ensure you are using genuine FLYSKY products and accessories for optimal performance and safety.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.