Introduction
This manual provides detailed instructions for the safe operation, setup, and maintenance of your SNICLO 1/43 4WD 2.4GHZ Mini FPV RC Simulation Climbing Off-road Vehicle Model. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Safety Information
WARNING:
- Not suitable for children under 14 years of age.
- Small parts may be lost or eaten by mistake. Keep them out of the reach of children under three years of age.
- The remote control requires its own batteries (AAA/18650 compatible, not included).
- The vehicle contains a Lithium Battery. Handle with care and follow all battery safety guidelines.
- Ensure the battery is charged at least once every six months, even during long-term storage, to maintain its health.
- The product features overcharge, over-discharge, short circuit, and overcurrent protection for the battery.
Package Contents
Verify that all items listed below are included in your package:
- RC Car (ENANO Radaniwa RTR or FPV version) x 1
- Remote Control x 1
- USB Charging Cable x 1
- Key Chain (random) x 1
- Instructions x 1

Image: Visual representation of the items included in the package for the ENANO Radaniwa RTR (without camera) version.
Setup Guide
1. Battery Charging (Vehicle)
The vehicle is equipped with a Polymer Lithium Battery. Use the provided Type-C USB charging cable for convenient and fast charging. The battery system includes overcharge, over-discharge, short circuit, and overcurrent protection.
- Connect the Type-C charging cable to the vehicle's charging port (located on the underside).
- Connect the other end of the USB cable to a compatible DC5V/2A USB power adapter (not included).
- Charging time is approximately 150 minutes for a full charge.
- For long-term storage, it is recommended to charge the battery at least once every six months to maintain its health.

Image: Underside of the car highlighting the Type-C charging port and internal battery.
2. Remote Control Battery Installation
The remote control requires its own batteries (AAA/18650 compatible, not included). Refer to the remote control's battery compartment for correct polarity and type.
- Open the battery compartment on the remote control.
- Insert the required batteries, ensuring correct polarity.
- Close the battery compartment securely.
3. FPV Camera Assembly (FPV Version Only)
The FPV camera features a magnetic design for easy and quick attachment/detachment.
- Align the magnetic base of the FPV camera with the designated mounting point on the top of the RC car.
- The camera will snap into place securely.
- To remove, gently pull the camera away from the mounting point.

Image: Demonstrates the magnetic camera design for easy assembly.
4. Pairing the Remote Control
The remote control and car utilize 2.4G automatic matching for intelligent frequency control.
- Ensure both the RC car and remote control have charged batteries.
- Turn on the RC car.
- Turn on the remote control.
- The remote control will automatically search for and connect to the car. No tedious debugging is required.
Operating Instructions
1. Basic Controls (MODE2 Controller)
The remote control features an ergonomic handwheel (56mm oversized) and quick buttons for precise control.

Image: The remote control for efficient operation.

Image: Detailed view of the remote control functions.
- Throttle: Controls forward and reverse movement.
- Direction: Steers the car left and right using the handwheel.
- Headlights, Atmosphere Lights, Turn Signals, Brake Lights, Reversing Lights: These simulation lights can be controlled via the remote (some functions may require model support).
- FPV Power Supply: Activates the FPV camera and transmission.
- Brakes: Engages the braking system.
- P1, P2 Buttons: These are quick buttons for fine adjustment of direction and power mode. Refer to the remote control diagram for specific functions.
2. FPV (First Person View) Operation (FPV Version Only)
Experience immersive driving with the FPV system, offering ultra-low latency video transmission.

Image: FPV camera details and a simulated view through the goggles.
- Wear the 5.8GFPV Glasses.
- Ensure the FPV camera is securely attached and powered on.
- The camera transmits real-time video with approximately 0.03 ultra-low latency.
- The 2.5mm 130° wide-angle lens provides a broad field of view.
- Video can be recorded in AVI format, and images in MJPEG format. Recording sound can be toggled on/off, with recording times of OFF/3/5/10 minutes.

Image: User enjoying the FPV experience with the RC car.
3. Driving Tips
- Desktop Climbing: The mini size of the car makes it suitable for indoor environments, allowing it to traverse furniture and other small obstacles.
- Off-road Hill Climbing: The simulation suspension and off-road tires provide enhanced grip and performance for climbing various terrains.
- Practice in open areas to get accustomed to the controls before attempting more challenging maneuvers or FPV driving.

Image: The RC car demonstrating its climbing capabilities on rocky terrain.

Image: The RC car navigating through shallow water, showcasing its off-road capabilities.
Maintenance
1. Battery Care
- As mentioned in safety, charge the vehicle's battery at least once every six months, even if not in use, to prevent deep discharge and prolong battery life.
- Do not expose batteries to extreme temperatures.
2. General Cleaning
- After use, especially in dusty or dirty environments, gently clean the car body and chassis with a soft, dry cloth.
- Avoid using water or harsh chemicals directly on electronic components.
- Inspect tires and suspension for any debris or damage.
3. Inspection
- Periodically check for loose screws or connections.
- Ensure the magnetic FPV camera is clean and securely attached.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not respond to remote control. |
|
|
| FPV video feed is blurry or intermittent. |
|
|
| Car performance is sluggish. |
|
|
Specifications

Image: Detailed specifications for the car, remote control, and FPV glasses.
| Vehicle Parameters | |
|---|---|
| Model Number | Enano8031 |
| Scale | 1:43 |
| Dimensions | 95*56*83mm |
| Wheelbase | 56mm |
| Wheel Spacing | 33mm |
| Minimum Ground Clearance | 6mm |
| Material | Metal |
| State of Assembly | Ready-to-Go |
| Type | Car |
| Features | Remote Control |
| Is Electric | Lithium Battery |
| Certification | CE |
| High-concerned chemical | None |
| Gearbox | Multi-stage deceleration |
| Front Tires | MT 22x9 R12.5 (mm) |
| Rear Tires | MT 22x9 R12.5 (mm) |
| Headlamps | White |
| Brake Light | Red |
| Turn Lamp | Orange |
| Reverting Lamp | White |
| Flight Time / Endurance | About 150 minutes |
| Remote Control Parameters | |
|---|---|
| Model | AX8 |
| Size | 106x92x138mm |
| Weight | 135g |
| Channel | 8 CHANNELS |
| Handwheel | 56mm |
| Controller Mode | MODE2 |
| Remote Control | Yes |
| FPV Glasses Parameters | |
|---|---|
| Name | 5.8GFPV Glasses |
| Screen Size | 4.3 inches |
| Resolution | 800x480 |
| Show Ratio | 16:9 |
| Frame Rate | 30 frames |
| Video Delay | Less than 20ms |
| Lens | 2.5x Fresnel lens, 92% transmittance without optical distortion |
| Power Adapter | DC5V/2A (USB interface) |
| Language | English/Chinese |
| Size | 155x144x113mm |
| Image Format | MJPEG |
| Video Format | AVI |
| REC Format | VGA/D1/HD |
| Recording Sound | ON/OFF |
| Recording Time | OFF/3/5/10min |
User Tips
- Practice Makes Perfect: Start by driving in open, uncluttered spaces to get a feel for the controls before attempting complex maneuvers or FPV driving.
- FPV Immersion: For the best FPV experience, ensure your FPV goggles are properly adjusted and the camera is clean.
- Regular Checks: Periodically check the car for any loose parts, especially after rough play, to prevent damage and ensure consistent performance.
- Battery Management: Always fully charge the car's battery before each use for maximum playtime.
Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.