MOONDROP MC2

Contents

Moondrop MC2 Multipurpose Microphone Upgrade Cable

User Manual

Introduction

The Moondrop MC2 is a high-quality multipurpose microphone upgrade cable designed to enhance your audio experience and communication. Featuring a 3.5mm plug and 0.78mm 2-pin connectors, it is compatible with a wide range of in-ear monitors (IEMs) and audio devices. The cable incorporates oxygen-free copper and silver plating with a Litz structure for superior signal transmission, along with an independent in-line control and high-performance microphone for clear calls and convenient media management.

Moondrop MC2 cable, coiled, showing 3.5mm jack and 2-pin connectors
Figure 1: Moondrop MC2 Multipurpose Microphone Upgrade Cable

Description: The image displays the Moondrop MC2 cable coiled, showcasing its 3.5mm audio jack, in-line control module, and two 0.78mm 2-pin connectors.

Setup Instructions

  1. Identify Connectors: The MC2 cable features two 0.78mm 2-pin connectors for your In-Ear Monitors (IEMs) and one 3.5mm audio jack for your audio source. The 2-pin connectors are typically marked 'L' for left and 'R' for right, often with color indicators (e.g., red for right).
  2. Close-up of the 0.78mm 2-pin connectors with red/black indicators
    Figure 2: 0.78mm 2-Pin Connectors

    Description: A close-up view of the two 0.78mm 2-pin connectors, showing their design and typical red/black color coding for right/left channels.

  3. Connect to IEMs: Carefully align the 0.78mm 2-pin connectors with the corresponding sockets on your IEMs. Ensure the 'L' connector goes into the left IEM and the 'R' connector into the right IEM. Push firmly until they are securely seated. Do not force the connection to avoid damage to the pins or sockets.
  4. Close-up of an IEM connected to the MC2's 2-pin connector
    Figure 3: IEM Connected to Cable

    Description: A detailed image showing an in-ear monitor (IEM) securely connected to one of the MC2's 2-pin connectors.

  5. Connect to Audio Source: Insert the 3.5mm audio jack into the headphone port of your desired audio source, such as a smartphone, computer, tablet (iOS/Android), or other compatible device.
  6. Moondrop MC2 cable connected to in-ear monitors (IEMs) and a laptop
    Figure 4: Cable Connected to IEMs and Laptop

    Description: The Moondrop MC2 cable is shown connected to a pair of in-ear monitors and plugged into a laptop, illustrating a typical setup.

  7. Adjust Volume: Before playing audio, ensure your device's volume is set to a low level to prevent sudden loud sounds.

Operating Instructions

In-line Control Functions

The Moondrop MC2 features an independent in-line control module with a high-performance microphone. This module allows for convenient management of audio playback and calls without needing to access your connected device directly.

Close-up of the in-line control module on the MC2 cable
Figure 5: In-line Control Module

Description: A close-up image of the MC2's in-line control module, showing the button and microphone opening.

Diagram illustrating the independent in-line control and microphone module
Figure 6: In-line Control and Microphone Diagram

Description: A diagram illustrating the internal structure and isolation of the independent in-line control and microphone module within the cable.

  • Play/Pause: Press the button once to play or pause audio playback.
  • Answer/End Call: Press the button once to answer an incoming call or end an ongoing call.
  • Next Track: Press the button twice quickly to skip to the next audio track.
  • Previous Track: Press the button three times quickly to go back to the previous audio track.
  • Microphone Usage: The integrated microphone is designed for clear voice pickup during calls. Ensure the microphone is positioned appropriately for optimal clarity.

The in-line control and microphone module are isolated from the audio output signals to ensure that your music quality remains unaffected during use.

Care and Maintenance

  • Handling: Always grasp the plug and connectors directly when connecting or disconnecting the cable. Avoid pulling on the cable itself to prevent internal damage.
  • Storage: When not in use, coil the cable loosely. Avoid tight coiling or sharp bends, which can stress the internal wires. Store in a clean, dry place away from extreme temperatures.
  • Cleaning: The exterior cover is made of sweat-resistant and high-permeability PVC. Wipe the cable gently with a soft, dry cloth to remove dust or dirt. Do not use harsh chemicals or abrasive materials.
  • Moisture: While the cable is sweat-resistant, avoid prolonged exposure to excessive moisture or liquids. If it gets wet, dry it thoroughly before use.

Troubleshooting

ProblemPossible CauseSolution
No sound or intermittent audioLoose connections, incorrect device settings, damaged cable.Ensure all 2-pin connectors and the 3.5mm jack are fully inserted. Check your device's volume and audio output settings. Test with another cable if possible.
Microphone not workingMicrophone muted, incorrect device settings, compatibility issue.Check your device's microphone input settings. Ensure the microphone is not physically obstructed. Some devices (e.g., certain gaming consoles like Xbox) may have specific requirements or limitations for external microphones; verify device compatibility.
Poor sound quality (e.g., limited frequency response)Cable damage, source quality, DAC compatibility.Ensure the cable is not damaged. If using with a dedicated DAC (Digital-to-Analog Converter), be aware that some DACs might recognize the cable as a headset, potentially limiting the frequency to 48kHz and affecting hi-res audio quality. This is a characteristic of some DACs when a microphone is detected.
In-line controls unresponsiveDevice incompatibility, software issue.Ensure your device supports standard in-line controls. Restart your audio source device.

Specifications

FeatureDetail
ModelMC2
SeriesMOONDROP Selected Series
Exterior CoverSweat-resistant and high-permeability PVC
Cable CoreLitz Structure High-purity Oxygen-free Copper Mixed Silver-plated Cable + Independent Shielded Cable (Microphone)
Audio Plug3.5mm
IEM Connectors0.78mm 2-pin
Item TypeEarphone Cables
MaterialPlastic
OriginMainland China
Cross-section diagram of the mixed stranded Litz cable
Figure 7: Cable Core Structure Diagram

Description: A detailed cross-section diagram illustrating the mixed stranded Litz cable design, showing the oxygen-free copper and silver-plated cores, and the isolation of the microphone and control cable.

Product Information and About MOONDROP section
Figure 8: Product Information Overview

Description: An image displaying key product information for the MC2 cable, including model, series, exterior cover, cable core details, and plug type, alongside information about the MOONDROP brand.

User Tips

  • This cable is an excellent upgrade for entry-level IEMs that often come with basic cables, significantly improving the overall experience.
  • The cable's build quality is generally praised, with users noting its soft and pleasant feel.
  • The built-in microphone performs well for calls, offering clear voice pickup for communication.
  • When connecting to certain professional DACs (Digital-to-Analog Converters), the cable might be recognized as a headset, which could limit the audio frequency to 48kHz. This may prevent the full benefit of hi-res audio quality for enthusiasts. Consider this if hi-res audio is your primary concern with a specific DAC.

Warranty and Support

For any issues, questions, or support regarding your Moondrop MC2 cable, please refer to the seller's or manufacturer's official website for warranty information and customer service contact details. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.