1. Introduction
Thank you for choosing the Jackery Explorer 2000 Plus Portable Power Station. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before using the product and keep it for future reference.

Figure 1: Jackery Explorer 2000 Plus Portable Power Station
2. What's in the Box
Before using your Jackery Explorer 2000 Plus, please check the package contents to ensure all items are present and undamaged.
- Jackery Explorer 2000 Plus Portable Power Station
- AC Charging Cable
- Car Charging Cable
- DC7909 to DC8020 Adapter
- User Manual

Figure 2: Package Contents and Product Dimensions (refer to the 'Package Contents' section in the image)
3. Setup
3.1 Initial Charge
It is recommended to fully charge your Jackery Explorer 2000 Plus before first use. This ensures optimal battery performance and longevity.
- Connect the AC Charging Cable to the AC Input port on the power station.
- Plug the other end of the AC Charging Cable into a standard wall outlet.
- The LCD display will show the charging status and battery percentage.
3.2 Port Overview
Familiarize yourself with the input and output ports on your power station:
- AC Output Ports: For powering standard household appliances.
- USB-A Output Ports: For charging smartphones, tablets, and other USB-A devices.
- USB-C Output Ports: For charging modern devices with USB-C connectivity, supporting Power Delivery.
- Car Port: For powering 12V DC devices, typically found in vehicles.
- DC Input Ports: For charging via solar panels (using the DC7909 to DC8020 adapter if needed) or other DC sources.
- AC Input Port: For charging from a wall outlet.
4. Operating Instructions
4.1 Turning On/Off
Press and hold the main power button for a few seconds to turn the power station on or off. The LCD display will illuminate when the unit is on.
4.2 Using Output Ports
- Ensure the power station is turned on.
- Press the respective button (e.g., AC, USB-A, USB-C) to activate the desired output section. An indicator light will usually confirm activation.
- Connect your device to the appropriate output port.
- Monitor the LCD display for output wattage and remaining battery life.
- When finished, disconnect your devices and turn off the output sections to conserve power.
4.3 Charging the Power Station
Your Jackery Explorer 2000 Plus can be charged via AC wall outlet, car charger, or solar panels.
- AC Charging: Use the provided AC Charging Cable and plug into a wall outlet.
- Car Charging: Use the provided Car Charging Cable and plug into your vehicle's 12V cigarette lighter socket.
- Solar Charging: Connect compatible solar panels (sold separately) to the DC Input ports. Ensure the solar panels are placed in direct sunlight for optimal charging.

Figure 3: Jackery Explorer 2000 Plus being charged by solar panels
5. Maintenance
- Cleaning: Use a dry, soft cloth to wipe the exterior of the power station. Do not use abrasive cleaners or solvents.
- Storage: Store the power station in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, charge the unit to 50-80% every 3-6 months to maintain battery health.
- Avoid Extreme Temperatures: Do not expose the unit to temperatures outside its operating range (0-45°C / 32-113°F).
- Ventilation: Ensure the ventilation openings are not blocked during operation to prevent overheating.
6. Troubleshooting
6.1 Power Station Not Turning On
- Ensure the battery is not completely depleted. Try connecting it to a power source.
- Press and hold the power button firmly for a few seconds.
6.2 No Output from Ports
- Check if the specific output section (AC, USB) is activated by pressing its respective button.
- Ensure the connected device is within the power station's output limits (e.g., AC rated 3000W).
- Check the battery level; if it's too low, some outputs may be disabled.
6.3 Power Station Not Charging
- Verify that the charging cable is securely connected to both the power station and the power source.
- Ensure the power source (wall outlet, car port, solar panel) is functional.
- Check the charging temperature; the unit will not charge if the temperature is outside the 0-45°C range.
7. Specifications
| Category | Specification |
|---|---|
| Model | Jackery Explorer 2000 Plus JE-2000C |
| Battery Type | LiFePO4 (Lithium Iron Phosphate) |
| Capacity | 2042.8Wh |
| Dimensions (L x W x H) | 473 x 359 x 307 mm |
| Weight | 27.9 kg |
| AC Output (x2) | 220V~, 50Hz, 10A, Rated 3000W, Max 6000W |
| USB-A Output (x2) | 5V=2.4A, 9V=2A, 12V=1.5A (Max 18W) |
| USB-C Output (x2) | 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=5A (Max 100W) |
| Car Port Output (x1) | 12V=10A |
| DC Input (x2) | 11-17.5V=8A (x2), 17.5-60V=12A (x2), Max 1400W |
| AC Input | 220V~240V~, 50Hz, 10A |
| Operating Temperature | 0-45°C (32-113°F) |
| Charging Temperature | 0-45°C (32-113°F) |
| Certifications | UN38.3, KC Certified |
8. Warranty and Support
8.1 Warranty Information
The Jackery Explorer 2000 Plus comes with a standard warranty. An extended service plan is available, offering a total of 5 years of coverage (3 years standard + 2 years extended).
8.2 Customer Support
For product inquiries, technical support, or warranty claims, please contact our customer service team:
- Phone: 02-851-4885

Figure 4: Product Consultation Contact Information
9. User Tips
- Optimize Solar Charging: Angle your solar panels directly towards the sun for maximum efficiency. Adjust their position throughout the day as the sun moves.
- Monitor Power Consumption: Keep an eye on the LCD display to understand how much power your devices are drawing and manage your remaining battery life effectively.
- Expand Capacity: For extended power needs, consider purchasing additional Jackery Battery Pack 2000 Plus units to expand the total capacity of your power station.

Figure 5: Jackery Explorer 2000 Plus with stacked battery expansion packs