DOYOKY Joycon RGB Gamepad User Manual

Introduction

Thank you for purchasing the DOYOKY Joycon RGB Gamepad. This manual provides detailed instructions on how to set up, operate, and maintain your new gamepad for an optimal gaming experience on your Nintendo Switch or Nintendo Switch OLED console. Please read this manual thoroughly before use and keep it for future reference.

Product Features

• 8-Color LED Ring Light & 3 Light Modes: Features adjustable LED ring lights with 8 colors and three modes: Single Color, Breathing Color Changing, and Rainbow mode.
• Back Map Button (M): Customizable back button for mapping X/Y/A/B/Z/L buttons, enhancing accessibility for complex actions.
• Turbo Function: Customize turbo speed for any button to free fingers and gain an advantage in fast-paced games.
• Precise Motion Controls (6-Axis Gyro): Built-in 6-Axis gyro for rapid start/stop motion control without delay, allowing for precise in-game actions.
• Dual Vibration: Equipped with adjustable dual vibration motors offering 4 levels (0%/30%/50%/75%/100%) for immersive tactile feedback.
• Screenshot Function: Easily capture and share your gaming moments.
• Wake Up Function: Conveniently wake up your game console directly from the gamepad.
• Ergonomic & Non-Slip Design: Hand-fit design with lightweight materials and an anti-skid pattern on the back for comfortable and secure grip.
• Long Battery Life: Up to 7-8 hours of continuous use on a full charge.
• Versatile Play Modes: Supports independent use, installation on a frame, wireless mode, and attachment to the console.
• Improved Controls: Features an improved all-angle joystick, redesigned D-Pad, and bigger trigger buttons for optimal precision and comfort.

Package Contents

• 1 x DOYOKY Classic Joycon (Left and Right controllers)
• 1 x Centerpiece (for combining controllers into a single gamepad)
• 1 x USB-C Charging Cable
• 1 x User Manual

Setup

1. Charging the Gamepad

Before first use, fully charge the gamepad. Connect the supplied USB-C charging cable to the USB-C port on the gamepad and to a power source (e.g., Nintendo Switch dock, USB wall adapter, or computer USB port). The LED indicators will show charging status and turn off when fully charged. Charging time is approximately 3 hours.

2. Connecting to Nintendo Switch/OLED

The DOYOKY Joycon Gamepad supports multiple connection methods:

A. Attaching to Console (Handheld Mode)

1. Slide the Left Joycon controller down along the left rail of your Nintendo Switch/OLED console until it clicks into place.
2. Slide the Right Joycon controller down along the right rail of your Nintendo Switch/OLED console until it clicks into place.
3. The console will automatically detect the controllers.

B. Wireless Mode (Bluetooth)

1. From the Nintendo Switch HOME Menu, select 'Controllers' > 'Change Grip/Order'.
2. On each Joycon, press and hold the SYNC Button (small round button on the side rail) for at least one second. The player LED(s) on the controller will flash.
3. Once paired, the player LED(s) corresponding to the controller number will remain lit.

C. Using with Centerpiece (Gamepad Mode)

1. Slide the Left Joycon controller onto the left side of the provided Centerpiece until it clicks.
2. Slide the Right Joycon controller onto the right side of the provided Centerpiece until it clicks.
3. Connect the assembled gamepad wirelessly via Bluetooth as described in 'Wireless Mode' above.

Figure 1: Various Play Modes

Operating Instructions

1. LED Ring Light & Modes

The joysticks feature an 8-color LED ring light with 3 different modes:

• Single Color Mode: Displays a static color.
• Breathing Color Changing Mode: Colors fade in and out.
• Rainbow Mode: Cycles through all colors in a rainbow effect.

Refer to the specific button combination in the quick start guide (if provided) or experiment with the 'M' button or other function buttons to cycle through colors and modes.

Figure 2: LED Ring Light Modes

2. Back Map Button (M)

The 'M' button on the back of the controller can be assigned to replicate other buttons (X/Y/A/B/Z/L, etc.). This allows for more comfortable and efficient gameplay by placing frequently used actions within easy reach.

1. Press and hold the 'M' button and the target button (e.g., 'A') simultaneously for a few seconds until the controller indicates successful mapping (e.g., a vibration or LED change).
2. Now, pressing the 'M' button will perform the action of the mapped button.

Figure 3: Turbo Function Setup

3. Turbo Function

The Turbo function allows for rapid, repeated pressing of a button by holding it down. This can be customized for any button.

1. Press the Turbo button (often marked 'T') and the desired action button (e.g., 'A') simultaneously to activate Turbo for that button.
2. Repeat the process to deactivate Turbo.
3. Some models allow adjusting Turbo speed. Consult the quick start guide for specific button combinations to cycle through speed settings.

4. 6-Axis Gyro Motion Controls

The built-in 6-Axis Gyro allows for precise motion control in compatible games.

• Adjust Action: Tilt the controller to control in-game movements.
• Adjust Direction: Rotate the controller to change direction or aim.
• Adjust Angle of Views: Move the controller to adjust camera angles.

Ensure the game you are playing supports motion controls for this feature to function.

Figure 4: 6-Axis Gyro Somatosensory Controls

5. Dual Vibration Adjustment

The gamepad features adjustable dual vibration with 4 levels: 0%, 30%, 50%, 75%, and 100%.

To adjust vibration intensity, refer to the quick start guide for the specific button combination (e.g., holding a specific button and pressing the D-pad up/down).

6. Screenshot & Wake Up Function

• Screenshot: Press the dedicated Screenshot button (usually a square icon) to capture in-game moments.
• Wake Up: Press the Home button on the controller to wake up your Nintendo Switch/OLED console from sleep mode.

Figure 5: Screenshot and Wake Up Function Buttons

Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the gamepad. Do not use harsh chemicals or abrasive materials.
• Storage: Store the gamepad in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the gamepad regularly, even if not in use for extended periods.
• Avoid Drops: Protect the gamepad from drops and impacts, which can damage internal components.

Troubleshooting

• Controller not connecting: Ensure the controllers are charged. Try re-pairing them via the 'Change Grip/Order' menu on the Switch. Make sure no other Bluetooth devices are causing interference.
• Buttons not responding: Check if the controller is properly connected. If using wirelessly, ensure it's within range. Try restarting the Switch console.
• Vibration not working: Check in-game settings to ensure vibration is enabled. Verify the vibration intensity setting on the controller is not set to 0%.
• Gyro/Motion control issues: Ensure the game supports motion controls. Try recalibrating the motion controls in the Nintendo Switch system settings.
• Charging issues: Ensure the USB-C cable is securely connected to both the gamepad and the power source. Try a different USB-C cable or power adapter.
• LED lights not working: Check if the controller is powered on. If the lights are off, try cycling through the light modes.

Specifications

User Tips

• For optimal comfort during long gaming sessions, experiment with both handheld mode (attached to console) and gamepad mode (using the centerpiece).
• Utilize the back map button for complex button combinations or frequently used actions to reduce hand strain and improve reaction time.
• Adjust the LED lighting to match your gaming setup or mood. The breathing and rainbow modes can add a dynamic visual element to your experience.
• If you experience any input lag in wireless mode, ensure your console is not too far from the controllers and there are no major obstructions or sources of interference.

Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.