LIONWEI USB-C Multi-function Hub Adapter

Product Overview

The hub expands a single USB-C port into multiple connectivity options:

• 1. RJ45: Provides up to 1000Mbps for stable, high-speed wired network access.
• 2. USB 3.0: Offers data speeds up to 5Gbps and a maximum power output of 5V/0.9A. It is backward compatible with USB 2.0 and USB 1.1.
• 3. USB 3.1: Delivers data speeds up to 10Gbps and a maximum power output of 5V/0.9A. It is backward compatible with USB 3.0, USB 2.0, and USB 1.1.
• 4. USB-C (Data): Supports data speeds up to 10Gbps and is backward compatible with USB 3.0, USB 2.0, and USB 1.1.
• 5. USB-C PD 3.0: Allows upstream charging for source devices like laptops, supporting up to 100W power input. Charging is limited to 87-96W for safety, which may vary based on firmware.
• 6. HDMI 1: Supports a maximum resolution of 4Kx2K at 60Hz (3840x2160) when operating independently (requires DP 1.4 from the source). When both HDMI ports are used simultaneously, the maximum resolution is 4Kx2K at 30Hz (3840x2160).
• 7. HDMI 2: Supports a maximum resolution of 4Kx2K at 30Hz (3840x2160) when operating independently or simultaneously (requires DP 1.2 or higher from the source).

Connectivity Diagram

The hub connects to a source device (Notebook or Tablet PC) via USB-C. It then provides connections to an Ethernet port, two HDMI displays, a USB-C data port, a USB-C PD 3.0 port, three USB 3.0 ports, and two USB 3.1 ports.

Graphics and Sound Settings

Windows 10 Settings

Clone Mode

To enable Clone Mode:

1. Right-click on the desktop.
2. Navigate to Graphics Settings > Display.
3. Under Select Display Mode, choose Clone Display.
4. Select the displays you wish to clone (e.g., Built-in Display and HDMI Display).

Extended Desktop Mode

To enable Extended Desktop Mode:

1. Right-click on the desktop.
2. Navigate to Graphics Settings > Display.
3. Under Select Display Mode, choose Extended Desktop.
4. Select the displays you wish to extend across (e.g., Built-in Display, HDMI Display 1, HDMI Display 2).

macOS Settings

Display Settings (Mirroring)

1. Click the Apple logo.
2. Go to System Preferences > Displays.
3. In the Arrangement tab, select Mirror Displays.
4. This will mirror the content across all connected displays.

Display Settings (Extending)

1. Click the Apple logo.
2. Go to System Preferences > Displays.
3. In the Arrangement tab, ensure Mirror Displays is unchecked.
4. Drag the displays to the desired position to extend your desktop. You can also drag the menu bar to a different display.

Resolution Settings

1. Click the Apple logo.
2. Go to System Preferences > Displays.
3. Select the desired resolution from the options provided (e.g., 3840x2160, 2560x1440). Choose Scaled for more options.

Sound Settings

1. Click the Apple logo.
2. Go to System Preferences > Sound.
3. Under the Output tab, select the desired audio output device (e.g., Digital Display).

Troubleshooting

• No Video Output: Ensure the USB-C port on your device supports video output, check cable connections, and use a standard HDMI cable. Note that Windows computers with Intel graphics may support a maximum of two external monitors.
• No Audio Output via HDMI: Verify that your monitor supports audio output and set the external monitor as the default audio output device in your system settings.
• Display Dropping with High-Current HDD/SSD: Connect your laptop charger to the USB-C PD charging port on the hub to provide sufficient power.
• Output Not Reaching 4K 60Hz: Confirm that your monitor, video source, and HDMI cable (version 2.0 or higher) all support 4K 60Hz. Ensure your computer supports DP 1.4 signal output.

Storage Conditions

• Ambient Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Storage Temperature: -20°C to 85°C (-4°F to 185°F)
• Ambient Operating Humidity: 20%-90% RH
• Storage Humidity: 5%-95% RH

Compliance

The product features FCC and CE compliance marks, indicating adherence to regulatory standards. It is manufactured in China.