1. Introduction
The EPEVER Tracer-AN G3 series charge controller utilizes advanced Maximum Power Point Tracking (MPPT) technology. This technology enables the controller to rapidly and accurately track the maximum power point (MPP) of the solar array, ensuring optimal solar energy harvesting. It can achieve up to 30% more power generation compared to traditional PWM charge controllers. This series is designed to accept a maximum open circuit voltage (Voc) of 100V, making it compatible with solar panels typically used in on-grid applications. A multi-function LCD provides clear and comprehensive display of the system's operational status.

Image: EPEVER Tracer-AN G3 MPPT Solar Charge Controller with optional accessories.
2. Key Features

Image: Overview of the Tracer-AN G3's main features.
- MPPT Technology: Tracking efficiency ≥99.5% and conversion efficiency of 98% for maximized PV utilization.
- Safety-Based Automatic Overcharge Limiting: Protects PV system from overcharging.
- Energy-Saving Design: Ultra-quiet and low-consumption for durability.
- Comprehensive Electronic Protection: Includes protection against over-discharge, over-temperature, overload, load short circuit, over-voltage, reverse polarity, short circuit, and reverse current.
- Versatile Battery Support: Compatible with Flooded, Gel, Sealed, Lithium, and User-defined battery types.
- Temperature Compensation and Self-Activation: Ensures optimal charging performance across varying temperatures.
- APP Control & Real-time Monitoring: Features an RS485 interface with optional 4G or Wi-Fi modules for remote monitoring and control.
- Multiple Load Modes: Offers Time Control, Light ON/OFF, and Manual Mode for flexible load management.
- Adjustable Charging Current: Maximum charging current can be set from 1A up to the rated value.
- Constant Voltage Output Function: Under specific conditions, the PV array can directly support the system load without requiring a battery.
3. Product Overview and Components

Image: Figure 1 Product Characteristics - Labeled components of the controller.
| No. | Component |
|---|---|
| 1 | SELECT button |
| 2 | RTS* Interface |
| 3 | PV Terminals |
| 4 | Battery Terminals |
| 5 | Load Terminals |
| 6 | RS485 communication interface |
| 7 | Mounting Hole Φ5mm |
| 8 | ENTER button |
| 9 | LCD |
Note: If the temperature sensor is short-circuited or damaged, the controller will charge or discharge at the default temperature setting of 25°C.
4. Setup and Installation
Follow the connection order carefully to ensure safe and proper operation of your solar charging system.

Image: Detailed wiring diagram showing connections for PV panel, battery, DC load, and optional inverter.
Connection Order:
- Connect Battery First: Connect the battery to the controller's battery terminals. Ensure correct polarity.
- Connect DC Load: Connect your DC loads to the load terminals.
- Connect Solar Panel: Connect the solar PV panel to the PV terminals.
- Connect Inverter (Optional): If using an inverter, connect it as shown in the diagram.
Disconnection Order:
To disconnect the system, reverse the connection order:
- Disconnect Inverter (if applicable)
- Disconnect Solar Panel
- Disconnect DC Load
- Disconnect Battery Last
Supported Battery Types: The controller supports various battery types including Lead-acid batteries (Sealed, Flooded, GEL, User-defined) and Lithium-ion batteries (LiFePO4, Li(NiCoMn)O2, User-defined).
5. Operating Instructions
Load Working Modes:
The Tracer-AN G3 offers enhanced load working modes for various application scenarios.

Image: Comparison of load working modes between Tracer-AN and Tracer-AN G3.
The Tracer-AN G3 controller provides 6 distinct load working modes:
- Manual Mode: Load is controlled manually via the controller's buttons.
- Light ON/OFF Mode: Load turns on automatically at dusk and off at dawn.
- Light ON/OFF + Timer Mode 1: Load turns on at dusk and stays on for a set duration (night on and day off).
- Light ON/OFF + Timer Mode 2: Load turns on for a set duration after dusk, then turns off until dawn (day on and night off).
- Real-time Control Mode: Allows for precise scheduling of load operation.
- Always ON Mode: Load remains continuously on.
Monitoring:
The controller features an RS485 interface for communication. Optional 4G or Wi-Fi modules can be connected to enable real-time monitoring and control via a mobile application or PC software.

Image: Remote monitoring setup with optional Wi-Fi module and smartphone app.
Constant Voltage Output Function:
Under specific conditions, the PV array can directly supply power to the system load, bypassing the battery. This feature is useful when the solar input is sufficient to power the loads directly.

Image: PV array directly powering loads without battery involvement.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your solar charge controller:
- Cleanliness: Keep the controller clean and free from dust and debris. Ensure ventilation openings are not blocked.
- Connections: Periodically check all wiring connections for tightness and corrosion. Loose connections can cause overheating and damage.
- Inspection: Inspect the controller for any signs of physical damage, discoloration, or unusual odors.
- Environment: Ensure the controller is installed in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your EPEVER Tracer-AN G3 MPPT Solar Charge Controller, consider the following general troubleshooting steps:
- No Display/Power: Check battery connections and ensure the battery voltage is within the controller's operating range. Verify that the battery is charged.
- No Charging: Ensure solar panels are connected correctly and receiving sufficient sunlight. Check PV voltage and current. Verify that the PV open circuit voltage does not exceed the controller's maximum input.
- Load Not Working: Check load connections and ensure the load is not exceeding the controller's rated discharge current. Verify the selected load working mode.
- Error Codes: If the LCD displays an error code, refer to the comprehensive manual (not provided here) for specific definitions and solutions.
- Temperature Sensor: If the temperature sensor is damaged or short-circuited, the controller will operate at a default temperature of 25°C. Replace the sensor if necessary for accurate temperature compensation.
For detailed troubleshooting and specific error code resolutions, please consult the full product manual provided by EPEVER.
8. Specifications
| Model | Tracer1210AN G3 | Tracer2210AN G3 | Tracer3210AN G3 | Tracer4210AN G3 |
|---|---|---|---|---|
| Battery rated voltage | 12/24VDC/Auto | |||
| Controller work voltage range | 8~31V | |||
| Rated charge current | 10A | 20A | 30A | 40A |
| Rated discharge current | 10A | 20A | 30A | 40A |
| Rated charge power | 130W/12V 260W/24V | 260W/12V 520W/24V | 390W/12V 780W/24V | 520W/12V 1040W/24V |
| Max. conversion efficiency | ≤98.0% | |||
| Tracking efficiency | ≥99.5% | |||
| MPP voltage range | (Battery Voltage+2V)~72V | |||
| Max. PV open circuit voltage | 100V (At minimum operating environment temperature) 92V (At 25℃ environment temperature) | |||
| Temperature compensation | -3mV/℃/2V (Default) | |||
| Relative humidity | ≤95%, N.C. | |||
| Enclosure | IP30 | |||
| Communication interface | RS485 (RJ45) | |||
| Grounding | Common Negative | |||
| Operating temperature range | -25℃~+45℃ (100% input and output) | |||
| Dimensions (LxWxH) (mm) | 172 x 139 x 44 | 220 x 154 x 52 | 228 x 164 x 55 | 252 x 180 x 63 |
| Net weight | 0.57kg | 0.94kg | 1.26kg | 1.65kg |
9. User Tips
- Ventilation: Always ensure adequate ventilation around the controller to prevent overheating, which can impact performance and lifespan.
- Battery Compatibility: Double-check that your battery type is correctly configured in the controller settings to ensure proper charging and prevent damage.
- Monitoring: Utilize the optional MT52 remote meter or Wi-Fi/Bluetooth modules for real-time monitoring of your system's performance. This helps in identifying potential issues early and optimizing energy harvest.
10. Warranty and Support
EPEVER products are designed for reliability and performance. For any warranty claims, technical support, or service inquiries, please contact your authorized dealer or the manufacturer directly. Ensure you retain your proof of purchase for warranty validation.