LEKATO MS-02

Contents

LEKATO MS-02 Wireless In-Ear Monitor System

Model: MS-02

User Manual

1. Introduction

The LEKATO MS-02 Wireless In-Ear Monitor System offers a 2.4G Stereo Wireless IEM solution designed for freedom and convenience. It is ideal for studio recordings, band rehearsals, and live performances, featuring easy automatic pairing between the transmitter beltpack and receiver. This system eliminates the need for tangled wires, providing clear and pure sound for monitoring.

This manual provides essential information for the safe and effective use of your LEKATO MS-02 system. Please read it thoroughly before operation and retain it for future reference.

2. Safety Information and Warnings

General Safety Advisory

  • Read all instructions before use to ensure safety and prevent damage.
  • Keep these instructions for future reference.
  • Heed all warnings and follow all instructions.
  • Do not use this apparatus near water.
  • Clean only with a dry cloth.
  • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  • Use only attachments/accessories specified by the manufacturer.
  • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  • Unplug this apparatus during lightning storms or when unused for long periods of time.
  • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  • The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
  • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Specific Warnings

  • Children: Keep the device and its cord out of reach of children under 3 years old. In case of ingestion, seek medical attention immediately.
  • Disassembly: Do not disassemble or repair this product by yourself.
  • Environment: Do not use or store it near heat sources, in damp or dusty areas. Avoid violent vibrations or shock.
  • Impact: Do not drop this product, otherwise it may malfunction.
  • Cleaning: Do not use alcohol or other cleaning fluids to clean this product.
  • Interference: Please make sure the transmitter and the receiver keep a distance away from wireless routers or other wireless equipment during use to prevent interference.
  • Obstructions: Obstructions between the transmitter and the receiver may affect the transmission distance.
  • Multiple Units: A maximum of 4 sets of transmitters and receivers can be used in the same place simultaneously.
  • Battery: If only one power indicator is flickering during use, indicating low battery, the transmission distance and quality will be affected. Charge it in time.
  • Storage: Please turn off the transmitter and the receiver when not in use.
  • Lithium Battery Care: Due to the self-discharge characteristic of lithium batteries, please charge the battery every 2 months to avoid low battery protection and prolong its lifespan.

Essential Precautions for Operation

  • Assess the Environment: Look for and identify potential dangers such as electrical sources, trip hazards, toxic substances, or moving machinery before proceeding.
  • Use Personal Protective Equipment (PPE): Wear appropriate PPE (e.g., safety glasses, gloves, helmet) as required for the specific task or environment.
  • Follow Procedures: Never bypass safety protocols, guards, or interlocks. Use equipment only for its intended purpose.
  • Stay Alert: Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.

Immediate Action Required

  • STOP if you are uncertain about the safety of any action.
  • CONSULT the relevant official safety manuals or qualified personnel for guidance.
  • DO NOT PROCEED without proper authorization and training for hazardous tasks.
  • Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.

3. Package Contents

Please check the package carefully to ensure all items are present and undamaged:

  • 1 x Wireless Transmitter
  • 1 x Wireless Receiver
  • 2 x Type-C Charging Cables
  • 1 x 3.5mm to 6.35mm Adapter
  • 2 x 3.5mm Audio Cables
  • 1 x User Manual (PDF version available online: User Manual PDF)
LEKATO MS-02 Package Contents
Figure 3.1: Contents of the LEKATO MS-02 package, including transmitter, receiver, cables, adapter, and user manual.

4. Product Overview

The LEKATO MS-02 system consists of a compact wireless transmitter and receiver, designed for seamless audio monitoring.

Key Features:

  • Ultra-Low Latency: Upgraded <4.5ms latency in Mono mode and <10.8ms in Stereo mode for real-time monitoring.
  • High Sampling Rate: 24bit/48KHz ensures delicate and realistic sound quality.
  • One TX to Many RX: Supports a single transmitter sending signals to multiple receivers simultaneously (up to 4 pairs of devices).
  • Long Battery Life: Built-in rechargeable lithium battery provides 6-8 hours of continuous operation.
  • Volume/Battery Level LED: LED indicators show current battery level and allow for 5-level volume adjustment on the receiver.
  • Mono/Stereo Switch: One-key switch between mono and stereo input modes.
  • 100Ft Wireless Range: 2.4GHz wireless frequency technology offers up to 100 feet (open area) of wireless range.
  • One-Key Mute: Professional one-touch mute function on the transmitter for critical moments.
  • Compact Design: Lightweight with a clip-on structure for easy portability.

Component Identification:

LEKATO MS-02 Transmitter and Receiver Front View
Figure 4.1: Front view of the LEKATO MS-02 Transmitter and Receiver, showing LED indicators and main power/pairing buttons.
LEKATO MS-02 Transmitter Controls and Connections
Figure 4.2: Detailed view of the Transmitter, highlighting Stereo/Mono switch, Pair button, Mute button, and input jack for devices like Mixers, Computers, or Smartphones.
LEKATO MS-02 Receiver Controls and Connections
Figure 4.3: Detailed view of the Receiver, highlighting Stereo/Mono switch, Pair button, Volume Up/Down buttons, and output jack for devices like Loudspeaker boxes, Guitar Amps, or Headphones.

5. Setup and Installation

Initial Charging:

Before first use, fully charge both the transmitter and receiver using the provided dual Type-C charging cables. The LED indicators will show charging status.

LEKATO MS-02 Charging Process
Figure 5.1: Charging the LEKATO MS-02 units using the dual USB-C cable. Battery level is indicated by LEDs.

Pairing the Transmitter and Receiver:

The MS-02 system features automatic pairing. Follow these steps:

  1. Turn on the Wireless Transmitter.
  2. Turn on the Wireless Receiver.
  3. Press and hold down the two pairing buttons (labeled 'PAIR') on both the transmitter and receiver simultaneously.
  4. The indicator lights will blink, indicating pairing mode.
  5. Wait for the lights on both the transmitter and receiver to become solid, indicating successful pairing.

Note: The receiver and transmitter must be on the same channel in order to pair. If you are using multiple sets, ensure each set is paired individually and on different channels if interference occurs.

One Transmitter to Multiple Receivers (One TX to Many RX):

The system supports connecting one transmitter to multiple receivers (up to 4 pairs of devices). To set this up:

  1. First, pair the transmitter with the first receiver as described above.
  2. Once the first pair is successful, turn on the second receiver.
  3. Press and hold the 'PAIR' button on the transmitter and the second receiver simultaneously until they pair.
  4. Repeat this process for any additional receivers you wish to connect.
LEKATO MS-02 One to Many Connection Diagram
Figure 5.2: Diagram illustrating how one transmitter can broadcast to multiple receivers simultaneously, ideal for band monitoring.

Connecting to Audio Devices:

  • Transmitter: Connect the transmitter to your audio source (e.g., mixer, computer, smartphone) using the provided 3.5mm audio cables or the 3.5mm to 6.35mm adapter.
  • Receiver: Connect your headphones, in-ear monitors, loudspeaker box, or guitar amp to the receiver's 3.5mm headphone jack.
LEKATO MS-02 Connected to Audio Devices
Figure 5.3: Transmitter connected to an audio source via 3.5mm jack and 6.35mm adapter, with receiver connected to in-ear monitors.

6. Operating Instructions

Power On/Off:

Long press the main power button on both the transmitter and receiver to turn them on or off.

Mono/Stereo Mode Switch:

Long press the 'STEREO/MONO' button on both the transmitter and receiver to switch between Stereo and Mono input modes. Ensure both units are set to the same mode for optimal performance.

  • Stereo Mode: Delay <10.8ms
  • Mono Mode: Delay <4.5ms (ultra-low latency)
LEKATO MS-02 Stereo Mono Switch Explanation
Figure 6.1: Explanation of Stereo and Mono modes and their respective latency values.

Volume Adjustment (Receiver):

The receiver is equipped with '+' and '-' buttons for 5-level volume adjustment. Press these buttons to quickly adjust to your desired sound level.

One-Key Mute (Transmitter):

The transmitter features a one-touch mute function. Press the 'MUTE' button to immediately stop audio transmission. This is useful for professional settings and live performances.

LEKATO MS-02 One Key Mute Function
Figure 6.2: Demonstration of the one-key mute function on the transmitter for seamless audio management.

Wireless Range:

The 2.4GHz wireless frequency technology provides an effective distance of up to 100 feet (approximately 30 meters) in an open area. This allows for freedom of movement in recording studios or on stage.

7. Maintenance

  • Cleaning: Use a dry, soft cloth to clean the units. Do not use alcohol or other cleaning fluids.
  • Storage: Store the device in a cool, dry place away from heat sources, dampness, and dust. Turn off both the transmitter and receiver when not in use.
  • Battery Care: To maintain the lithium battery's health, charge the units every two months if not in regular use to prevent deep discharge.
  • Avoid Damage: Do not expose the product to violent vibrations, shock, or dropping.
  • Servicing: Do not attempt to disassemble or repair the product yourself. Refer all servicing to qualified service personnel.

8. Troubleshooting

  • No Sound/Intermittent Sound:
    • Ensure both transmitter and receiver are powered on and fully charged.
    • Verify that the transmitter and receiver are successfully paired (solid indicator lights).
    • Check audio cable connections between the source and transmitter, and receiver and monitoring device.
    • Ensure the volume on the receiver is not set to minimum.
    • Check for obstructions between the transmitter and receiver, which can affect transmission distance and quality.
    • Ensure the transmitter and receiver are not too close to wireless routers or other 2.4GHz wireless equipment that might cause interference.
  • Low Battery Indication:
    • If a power indicator is flickering, it signifies low battery. Charge the unit immediately using the provided Type-C charging cable.
  • Difficulty Pairing:
    • Ensure both units are turned on and within close proximity.
    • Long press the 'PAIR' buttons on both units simultaneously until the lights become solid.
    • If using multiple sets, ensure each set is paired individually and on different channels if possible to avoid conflict. A maximum of 4 sets can be used simultaneously in the same area.
  • Unit Not Functioning After Drop/Damage:
    • If the apparatus has been damaged (e.g., dropped, liquid spilled), it may not operate normally. Refer to qualified service personnel for repair.

9. Specifications

Feature Specification
Brand LEKATO
Model MS-02 (MW-20)
Wireless Communication Technology 2.4 GHz Radio Frequency
Frequency Range 20-20KHz
Sampling Rate 48KHz/24bit
Mono Delay <4.5ms
Stereo Delay <10.8ms
Effective Distance 100 feet (approx. 30 meters) in open area
Battery Life 6-8 hours (continuous operation)
Headphones Jack 3.5 mm Jack
Ear Placement In Ear (for monitoring)
Item Weight 5.3 ounces (approx. 150g)
Batteries Included Yes (rechargeable lithium battery)
LEKATO MS-02 Dimensions and Specifications Table
Figure 9.1: Visual representation of product dimensions and key specifications.

10. User Tips

  • Multi-Device Connectivity: Remember that one transmitter can connect to multiple receivers. This is a great feature for bands or multiple performers needing to monitor the same audio source. Simply pair each receiver individually with the same transmitter.
  • Optimize Latency: For critical timing applications, switch to Mono mode on both the transmitter and receiver to achieve the lowest possible latency (<4.5ms). Stereo mode offers a richer sound but with slightly higher latency.
  • Battery Management: Always keep an eye on the LED battery indicators. Charging promptly when low will ensure uninterrupted performance during rehearsals or live shows.
  • Minimize Interference: While the 2.4GHz band is robust, try to keep the units away from other strong 2.4GHz devices like Wi-Fi routers to maintain a stable connection, especially in crowded wireless environments.

11. Warranty and Support

LEKATO products are manufactured to high-quality standards. For any issues or support, please refer to the official LEKATO website or contact your retailer. Keep your purchase receipt as proof of purchase for warranty claims.

12. EC Declaration of Conformity

Product Name: MW-20 Wireless Microphone Transceiver 2.4G Monitor System

Model: MW-20

Manufacturer: Musical instrument production Guangzhou Manufacturer Guangdong Province, China

EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23AT2P, IRELAND

This symbol indicates that this product conforms with all applicable European Union regulations. "Conformité Européenne" (CE) confirms that the product meets the essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares that the product is in compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.

Correct Disposal of this Product (WEEE Directive 2012/19/EU)

This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.