Roborock S9 MaxV Ultra

Contents

Roborock S9 MaxV Ultra Robot Vacuum Cleaner User Manual

Model: S9 MaxV Ultra

1. Product Overview

The Roborock S9 MaxV Ultra is an advanced robotic vacuum and mop cleaner designed for comprehensive home cleaning. It features an ultra-slim design, 108 obstacle avoidance technology, a robotic arm for enhanced edge cleaning, and threshold lifting capabilities. The accompanying auto-empty and auto-wash dock provides a hands-free cleaning experience.

Roborock S9 MaxV Ultra robot vacuum and auto-empty/wash dock in black and white

Image: Roborock S9 MaxV Ultra robot vacuum and auto-empty/wash dock in black and white.

2. Setup Guide

  1. Unpack the Robot and Dock: Carefully remove all components from the packaging. Ensure all protective films and packing materials are removed from the robot and the dock.
  2. Choose a Location for the Dock: Place the auto-empty and auto-wash dock on a hard, level surface against a wall. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the dock for optimal robot navigation. Avoid placing it near stairs or in areas with direct sunlight.
  3. Connect Power: Plug the power cable into the dock and then into a wall outlet. Ensure the cable is neatly tucked away to prevent the robot from tangling.
  4. Fill Water Tanks (if applicable): If your model includes a clean water tank for mopping, fill it with clean water.
  5. Place the Robot on the Dock: Manually place the robot onto the charging contacts of the dock. The robot will power on automatically and begin charging.
  6. Download the Roborock App: Search for 'Roborock' in your mobile app store (iOS or Android) and download the application.
  7. Connect to Wi-Fi: Follow the in-app instructions to connect your robot to your home Wi-Fi network. This will enable smart features and remote control.
  8. Initial Mapping: Once connected, initiate an initial mapping run through the app. The robot will explore your home to create a detailed map, which is essential for efficient cleaning and advanced features like zone cleaning and no-go zones.

3. Operating Instructions

3.1 Basic Operation

  • Start/Pause Cleaning: Press the Power button on the robot or use the 'Start' button in the Roborock app. Press again to pause.
  • Return to Dock: Press the Dock button on the robot or use the 'Recharge' button in the app.
  • Spot Cleaning: Manually place the robot in the desired area and press the Spot Clean button (if available) or select 'Spot Clean' in the app.

3.2 Using the Roborock App

  • Map Management: View and edit maps, set no-go zones, invisible walls, and no-mop zones.
  • Cleaning Modes: Select from various cleaning modes (e.g., Vacuum Only, Mop Only, Vacuum & Mop) and adjust suction power and water flow levels.
  • Scheduled Cleaning: Set schedules for automatic cleaning at specific times and days.
  • Zone Cleaning: Define specific areas on the map for the robot to clean.
  • Multi-Floor Support: The robot can save multiple maps for homes with more than one level.
  • Robot Arm Cleaning: Utilize the robot arm feature via the app for enhanced edge and corner cleaning.
  • Obstacle Avoidance: The 108 obstacle avoidance system intelligently navigates around common household items.

4. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Roborock S9 MaxV Ultra.

4.1 Robot Maintenance

  • Empty Dustbin: The robot features a 'Dust Bucket' type storage. Empty the dustbin after each cleaning cycle or as indicated by the app.
  • Clean Filter: Tap the filter to remove dust. Rinse with water if necessary and allow to air dry completely before reinserting. Replace every 3-6 months.
  • Clean Main Brush: Remove hair and debris tangled around the main brush. Use the cleaning tool provided.
  • Clean Side Brush: Remove any tangled hair or debris. Replace if bent or damaged.
  • Clean Wheels: Wipe the drive wheels and caster wheel to remove any accumulated dust or hair.
  • Clean Sensors: Wipe all sensors (cliff sensors, wall sensor, charging contacts) with a soft, dry cloth.
  • Clean Mop Pad: Remove and wash the mop pad after each mopping session. Replace regularly.

4.2 Dock Maintenance

  • Empty Dust Bag: The auto-empty dock will collect dust from the robot. Replace the dust bag when full.
  • Clean Dirty Water Tank: Empty and rinse the dirty water tank regularly to prevent odors and buildup.
  • Clean Dock Charging Contacts: Wipe with a dry cloth to ensure good connection with the robot.
  • Clean Dock Base: Wipe down the base of the dock, especially the area where the mop is washed, to remove any residue.

5. Troubleshooting

ProblemPossible CauseSolution
Robot does not power onLow battery; Power button not pressed correctlyPlace robot on dock to charge; Press and hold power button for 3 seconds.
Robot cannot chargeCharging contacts dirty; Dock not poweredClean charging contacts on robot and dock; Ensure dock is plugged in and powered.
Robot gets stuck frequentlyToo many obstacles; Cliff sensors dirtyClear clutter from floor; Clean cliff sensors.
Poor cleaning performanceDustbin full; Brush tangled; Filter cloggedEmpty dustbin; Clean main brush; Clean/replace filter.
No water output during moppingWater tank empty; Mop pad not installedFill clean water tank; Ensure mop pad is correctly attached.
App connection issuesIncorrect Wi-Fi password; Router too far; Robot offlineVerify Wi-Fi password; Move robot closer to router; Reset Wi-Fi on robot and re-pair.

For more detailed troubleshooting, refer to the Roborock app or the official Roborock support website.

6. Specifications

FeatureDetail
Brand NameRoborock
ModelS9 MaxV Ultra
FunctionWet and Dry (Vacuum & Mop)
Dust Storage TypeDust Bucket (Robot), Dust Bag (Dock)
Power (W)60W
Voltage220 - 240 V
Remote ControlYes (via Roborock App)
Navigation SystemLiDAR Navigation, ReactiveAI 2.0 Obstacle Avoidance
Special FeaturesRobot Arm for Edge Cleaning, Threshold Lifting, Auto-Empty, Auto-Wash Mop, Auto-Refill Water, Auto-Dry Mop
Color OptionsBlack, White
OriginMainland China

7. Warranty & Support

For warranty information, please refer to the official Roborock website or contact your point of purchase. Keep your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Roborock support page or contact their customer service directly. Details can typically be found within the Roborock app or on the manufacturer's website.

8. User Tips

  • Prepare Your Home: Before a cleaning cycle, pick up small objects, cables, and loose items from the floor to prevent the robot from getting stuck or damaging items.
  • Regular Map Updates: If you frequently rearrange furniture, consider performing a quick mapping run to update the robot's internal map for optimal navigation.
  • Deep Cleaning: For heavily soiled areas, use the spot cleaning function or increase the suction power and water flow settings in the app.
  • Maintain Water Tanks: Always use clean water in the clean water tank and empty the dirty water tank promptly after mopping to prevent bacterial growth and odors.
  • Firmware Updates: Regularly check the Roborock app for firmware updates to ensure your robot has the latest features and performance improvements.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.