Introduction
Thank you for choosing the Kemei KM-1990 Professional Hair Clipper. This versatile and high-performance grooming tool is designed for precise hair cutting and beard trimming, suitable for the entire family. Featuring a durable stainless steel blade, a powerful rotary motor, and an intelligent LCD display, the KM-1990 offers both corded and cordless operation for maximum convenience. Please read this manual carefully before use to ensure proper operation and maintenance.
Package Contents
Upon unpacking, please ensure all items listed below are present:
- 1 x Kemei KM-1990 Hair Clipper Machine
- 1 x USB Charging Cable
- 6 x Guide Combs (1mm, 2mm, 3mm, 4mm, 5mm, 6mm)
- 1 x Cleaning Brush
- 1 x User Manual (this document)
Specifications
| Feature | Detail |
|---|---|
| Brand | Kemei |
| Model | KM-1990 |
| Power & Voltage | 10W, AC 110-240V |
| Battery Type | 500mAh Li-ion Battery |
| Charging Time | 1.5 Hours |
| Running Time | Approx. 120 Minutes |
| Machine Net Weight | Approx. 138g |
| Machine Size | Approx. 15cm x 4.1cm |
| Machine Material | ABS |
| Blade Material | Stainless Steel |
| Motor Type | ROTARY |
| Minimum Haircut Length | Less than 0.5mm |
| Length Adjustment Method | Change of nozzles (Guide Combs) |
| Functions | Electric length adjustment, wet/dry haircut, floating head, automatic power selection, automatic cleaning, washing knives under water, fast charging, charging indication |
| Target Audience | Universal |
| Certification | CE |
Setup
Initial Charging
Before first use, fully charge the hair clipper. Connect the USB charging cable to the clipper and a suitable USB power adapter (not included). The intelligent LCD display will show the charging progress and remaining battery percentage. A full charge takes approximately 1.5 hours and provides up to 120 minutes of running time.
Attaching Guide Combs
To achieve desired hair lengths, select one of the 6 guide combs (1mm, 2mm, 3mm, 4mm, 5mm, 6mm). Align the comb with the clipper blade and push it firmly until it clicks into place. Ensure the comb is securely attached before use.
Operating Instructions
Power On/Off
Press the power button located on the front of the clipper to turn it on or off. The LCD display will illuminate, showing battery level and current speed setting.
Adjusting Hair Length (Fine-Tuning)
In addition to guide combs, the clipper features a four-speed fine-tuning adjusting rod (0.5-1.0mm) for subtle control of hair length. Use this lever to make minor adjustments to the cutting length without changing guide combs.
Speed Settings
The clipper offers three speed settings, allowing you to control the cutting speed according to your preference and hair type. Adjust the speed as needed for a comfortable and effective trimming experience.
Corded and Cordless Operation
The KM-1990 supports both cordless operation (powered by its internal battery) and corded operation (plugged in while in use). This dual functionality ensures you can always use the clipper, even if the battery is low.
Maintenance
Blade Alignment
Your shears are carefully inspected to ensure that the blades are oiled and aligned before leaving the factory. If the blades are removed for cleaning or replacement, they must be re-aligned. Follow these steps:
- Simply match the top and bottom blade teeth point to point upwards.
- The ends of the top blade teeth should be approximately 0.5-1.0mm back from the bottom blade.
- If the blades are not aligned correctly, put a few drops of oil on the blades.
- Turn the shears open for a while, close, and unplug them.
- Loosen the screw slightly and make adjustments until the blades are aligned, then tighten the screw.
Cutter Maintenance (Oiling)
To keep your shears in top condition, the blades should be oiled every few haircuts. To oil it properly, the unit blades should be kept in the downward position. Run the shears with the blades through the top blade after oiling.
Note: The oil bottle is not included in the package due to air shipping limitations. Please acquire suitable clipper oil separately.
Cleaning
The hair clipper head design is easy to clean. Hair does not easily block the cutter head. After each use, remove the guide comb and use the included cleaning brush to remove any loose hairs from the blades and the clipper body. For a more thorough cleaning, the blades can be washed under water (ensure the clipper body is not submerged unless specified as waterproof, which this model supports for washing knives under water).
Troubleshooting
- Clipper not turning on: Ensure the battery is charged. If operating cordlessly, plug it in. If operating corded, check the power source.
- Poor cutting performance / Hair pulling: The blades may be dull, dirty, or improperly aligned. Clean and oil the blades. If necessary, re-align them as per the maintenance section.
- "Card Issue" (Hair getting stuck): The cutter head is designed to be rounded and polished to prevent hair from getting stuck. Ensure the blades are clean and oiled. If the issue persists, check for any foreign objects or damage to the blades.
- Reduced battery life: Ensure the clipper is fully charged before each use. Over time, battery performance may degrade.
User Tips
- For best results, ensure hair is clean and dry before trimming, unless performing a wet haircut.
- Always start with a longer guide comb than you think you need, and gradually reduce the length until you achieve your desired style.
- Move the clipper against the direction of hair growth for an even cut.
- Regular oiling of the blades significantly extends their lifespan and maintains cutting efficiency.
- The quiet motor allows for a more pleasant grooming experience, especially for children.
Warranty and Support
Product Guarantees
This product is manufactured and inspected through strict quality control. In the event of a fault during correct use, the consumer is entitled to a free warranty service at the purchasing shop or our repair center, in accordance with the warranty card.
Please note that batteries and blades are considered consumables and are not included in the warranty; they are subject to payment for replacement.
Exclusions from Free Service
Free service will NOT be provided in the following cases:
- Damage caused by unapproved repairs or alterations.
- Damage caused by incorrect or negligent use or accident.
- Damage caused by natural disasters or voltage anomalies.
- Damage due to neglect of product specifications.
Further Assistance
For any questions or further support, please refer to the official Kemei customer service channels or the retailer where the product was purchased. A PDF version of this user manual may also be available for download from the manufacturer's website.
Reference to PDF manual: View User Manual (PDF)