1. Introduction
Thank you for choosing the Baseus Super Energy Alpha Series Jump Starter 600A. This compact and powerful device is designed to provide emergency jump-starting for your vehicle and also functions as a portable power bank for your electronic devices. Please read this manual carefully before use to ensure safe and optimal performance.

2. Package Contents
Please check the package for the following items:
- Baseus Super Energy Alpha Series Jump Starter 600A Unit
- Smart Clamps (with integrated safety features)
- USB Charging Cable
- User Manual (this document)

3. Specifications
| Attribute | Specification |
|---|---|
| Name | Baseus Super Energy Alpha Series Jump Starter 600A |
| Model No. | BS-CH006 |
| Color | Cosmic Black |
| Material | ABS+Silica Gel |
| Battery Capacity | 6000mAh/22.2Wh (4S Ternary Li-Polymer) |
| Rated Output Capacity | 3700 mA |
| Type-C Input | 5V/3A |
| USB A Output | 5V/3A |
| Starting Voltage | 12Vdc |
| Starting Current | 300A |
| Peak Current | 600A |
| Applicable to | 12V 2.5L Diesel Cars / 12V 4.0L Gas Cars |
| Item Weight | 600g |
| Dimensions (approx.) | 131mm x 52mm x 49mm |
| Operating Temperature | -20°C to 60°C |
| Certifications | CE, FCC, UL, RoHS |



4. Safety Information & Warnings
IMPORTANT: Please read all safety warnings and instructions before use.
- DO NOT use the product if the battery level is under 50% or it is overheating.
- Ensure the EC5 connector is fully plugged into the jump starter. Improper connection may affect performance or melt the plastic part of the connector.
- DO NOT use this product frequently or jump start cars consecutively. Allow at least 30 seconds between jump start attempts.
- DO NOT attempt to jump start a 24V vehicle. This product is designed for 12V gas/diesel cars only.
- Always ensure correct polarity when connecting the clamps to the car battery. Reverse polarity protection is built-in, but caution is advised.
- Stop the jump starting process if the car fails to start after 3 attempts in a row to prevent damage to the product.
- Keep out of reach of children.
- Do not disassemble, modify, or expose the device to fire or extreme temperatures.



5. Setup & Charging
5.1 Charging the Jump Starter
Before first use, fully charge the jump starter. Use the provided USB charging cable and connect it to the Type-C input port (5V/3A) on the device and a suitable USB power adapter (not included).
- The ring indicator will show the battery level during charging.
- A full charge ensures optimal performance, especially for zero-volt battery starts.
5.2 Initial Setup of Smart Clamps
The smart clamps are designed for easy and safe connection. Ensure they are properly connected to the jump starter unit before use.
- Plug the smart clamps into the EC5 port of the jump starter.
- The indicator on the smart clamps will flash red and green alternately, indicating it's ready for connection to the car battery.

6. Operating Instructions
6.1 Jump Starting Your Car
Follow these steps for a super-easy jump start:
- Plug in the Smart Clamps: Insert the smart clamps into the EC5 port of the jump starter. The indicator on the clamps will flash red and green alternately.
- Connect to Car Battery: Open the engine hood of your car. Connect the red (+) clamp to the positive terminal of your car battery and the black (-) clamp to the negative terminal. Ensure polarities are connected properly.
- Start the Engine: Go back into your car and start the engine.
- Remove Jump Starter: Immediately remove the jump starter from the car battery once the engine starts.
Note: For best results, ensure the jump starter's battery level is above 50%. For zero-voltage starts, ensure the battery level is above 75%. The entire jump start process should be completed within 30 seconds.


6.2 Using as a Power Bank
The jump starter can also charge your electronic devices:
- Connect your device's charging cable to the USB A output port (5V/3A) on the jump starter.
- The device will begin charging automatically.


6.3 Using the Lighting Modes
The jump starter features three lighting modes for various scenarios:
- Emergency Light Mode: Provides regular illumination.
- SOS Mode: Flashes alternately for signaling help.
- Strobe Light Mode: An alarmingly bright flash to deter danger.
To activate and cycle through the modes, press the power button on the device.


6.4 Automatic Power Off
The device will automatically turn off after 1 minute of no operation to conserve battery life.
7. Maintenance
- Store the jump starter in a cool, dry place away from direct sunlight and high temperatures.
- Charge the device every 3-6 months to maintain battery health, even if not in use.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Keep the clamps clean and free from rust or dust for optimal connection.
8. Troubleshooting
- Q: Why can't the jump starter start the car?
- A: Check the battery status of the jump starter; it should be above 50% for normal starts and above 75% for zero-volt starts. Ensure the smart clamp is connected properly to both the jump starter and the car battery. Also, check for any rust or dust on the car battery terminals and clean them if necessary. Do not attempt to jump start more than 3 times in a row; stop and allow the device to cool down.
- Q: Why is there buzzing when the product is not even connected to the car?
- A: This might indicate the clamp is not fully plugged into the jump starter. Please re-plug the clamp firmly into the EC5 port.
- Q: Can it charge car batteries?
- A: No, this device is designed for jump-starting vehicles and charging small electronic devices, not for charging car batteries.

9. User Tips
- Always keep your jump starter charged, especially before long trips, to ensure it's ready for emergencies.
- Familiarize yourself with the location of your car battery terminals before an emergency arises.
- The built-in flashlight is very useful in dark conditions, utilize its different modes (Emergency, SOS, Strobe) as needed.
- Remember the device automatically turns off after 1 minute of inactivity, which helps save battery.
10. Warranty & Support
For warranty information and customer support, please refer to the official Baseus website or contact your retailer. Keep your purchase receipt as proof of purchase.

11. Product Video
Watch this video for a visual guide on how to use your Baseus Jump Starter: