MN MODEL XK913

Contents

MN MODEL XK913 RC Helicopter Instruction Manual

Model: XK913

1. Introduction

Thank you for purchasing the MN MODEL XK913 RC Helicopter. This remote-controlled helicopter is designed for both beginner and intermediate operators, offering stable flight, durable construction, and engaging features like night navigation lights. Please read this manual thoroughly before operating the helicopter to ensure safe and correct usage, and to maximize your flying experience.

MN MODEL XK913 RC Helicopter in gold and silver

The XK913 RC Helicopter, ready for flight.

2. Safety Information

WARNING: Not suitable for children under 14 years due to small parts and potential hazards. Adult supervision is recommended for all users.

  • Always operate the helicopter in an open, unobstructed area, away from people, animals, and obstacles.
  • Do not fly near power lines, trees, or water.
  • Ensure the helicopter's battery is fully charged and the remote control has fresh batteries before each flight.
  • Never touch the rotating blades during operation.
  • Turn off the helicopter and remote control when not in use.
  • Do not attempt to modify or repair the helicopter yourself. Refer to authorized service if needed.
  • Keep the helicopter and its components away from extreme temperatures and moisture.

3. Package Contents

Please check the box to ensure all items are present:

  • RC Helicopter (XK913) x 1
  • Remote Controller x 1
  • USB Charging Cable x 1
  • Screwdriver x 1
  • Operating Instructions Manual x 1
XK913 RC Helicopter package contents and dimensions

Example of XK913 package contents and dimensions.

4. Specifications

FeatureDetail
Model NumberXK913
Control Channels3.5 Channels (2-way remote control)
MaterialMetal, Plastic
Helicopter BatteryBuilt-in rechargeable Lithium Battery
Remote Control BatteryRequires 3 x AAA batteries (not included)
Flight TimeApproximately 8-20 minutes
Charging TimeApproximately 20 minutes
Control ModeMODE1, MODE2
Indoor/Outdoor UseIndoor-Outdoor
Recommended Age14+ years
FeaturesLighting, Fall Resistant, USB Charging, Night Navigation Light, Flexible Wing, Balance Bar, Stable Double-Paddle Flight, High Speed Flight, Throttle Acceleration Fine Adjustment, One Key Remote Control Switch
Helicopter DimensionsApprox. 17cm (L) x 14cm (W) x 10.5cm (H)
Product Information table and accessories

Detailed product information and accessories.

5. Setup Guide

5.1. Charging the Helicopter Battery

  1. Locate the USB charging cable provided in the package.
  2. Connect the small end of the USB cable to the charging port on the helicopter.
  3. Connect the larger end of the USB cable to a USB power source (e.g., computer USB port, USB wall adapter).
  4. The indicator light on the helicopter will show charging status (refer to the helicopter's specific light behavior for full charge indication, typically light off or changing color).
  5. Charging takes approximately 20 minutes. Do not overcharge.

5.2. Installing Remote Control Batteries

  1. Open the battery compartment on the back of the remote control using the provided screwdriver.
  2. Insert three (3) AAA batteries (not included), ensuring correct polarity (+/-).
  3. Close the battery compartment and secure it with the screw.

5.3. Pairing the Helicopter and Remote Control

  1. Ensure both the helicopter and remote control are turned off.
  2. Place the helicopter on a flat, level surface.
  3. Turn on the helicopter's power switch (usually located on the bottom). The helicopter's lights may flash.
  4. Turn on the remote control's power switch. The remote control's indicator light will flash.
  5. Move the left throttle lever (joystick) on the remote control fully up, then fully down. This initiates the pairing process.
  6. Once paired, the helicopter's lights and the remote control's indicator light will stop flashing and remain solid. You are now ready to fly.
Remote control battery installation and operation steps

Remote control battery installation and basic throttle operation.

6. Operating Instructions

6.1. Remote Control Overview

Helicopter and remote control labeled diagram

Labeled diagram of helicopter components and remote control functions.

The remote control features two main joysticks and trim buttons for fine-tuning flight. Refer to the diagram above for component identification.

  • Left Joystick (Throttle Lever): Controls ascent and descent. Push up to ascend, pull down to descend.
  • Right Joystick: Controls forward/backward movement and left/right rotation.
  • Trim Buttons: Used to correct unwanted drifting. If the helicopter drifts forward, press the backward trim button. If it spins left, press the right trim button, and so on.
  • Power Switch: Turns the remote control on/off.
  • Signal Transmitter: Emits the control signal to the helicopter.
  • Power Indicator: Shows the remote control's power status.

6.2. Basic Flight Controls

  1. Take-off: After pairing, gently push the left throttle lever upwards. The helicopter will ascend.
  2. Ascend/Descend: Use the left throttle lever.
  3. Forward/Backward: Push the right joystick forward or backward.
  4. Turn Left/Right: Push the right joystick left or right.
  5. Landing: Slowly pull the left throttle lever downwards until the helicopter gently lands.

6.3. Night Flight Lighting

The XK913 helicopter is equipped with night navigation lights. These lights help in distinguishing the direction of the helicopter and tracking it during night flights, enhancing visibility and fun.

Blue helicopter with matching lights for night flight

Matching lights aid in night navigation.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the helicopter. Do not use water or chemical cleaners.
  • Blade Inspection: Regularly check the main and tail rotor blades for any damage (cracks, bends). Replace damaged blades immediately to ensure safe flight.
  • Battery Care: Always fully charge the helicopter battery before storage if it will not be used for an extended period. Do not leave batteries fully discharged.
  • Storage: Store the helicopter and remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Nose Cover: The helicopter features a secure covered nose design, which protects internal electronic components from bumps and reduces maintenance costs.
Close-up details of helicopter components like landing gear and balance fin

Details of the helicopter's landing gear, nose cover, navigation light, and balance fin.

8. Troubleshooting

ProblemPossible CauseSolution
Helicopter does not respond to remote control.Not paired, low battery (helicopter or remote), out of range.Ensure helicopter and remote are paired correctly. Charge helicopter battery. Replace remote control batteries. Ensure helicopter is within control range.
Helicopter drifts or spins uncontrollably.Trim settings incorrect, damaged blades.Adjust trim buttons on the remote control. Check blades for damage and replace if necessary.
Helicopter does not take off or has weak lift.Low helicopter battery, damaged blades.Fully charge the helicopter battery. Check blades for damage and replace if necessary.
Lights are not working.Helicopter not powered on, internal wiring issue.Ensure helicopter is powered on. If problem persists, contact support.

9. User Tips

  • Practice in Open Spaces: For beginners, start flying in a large, open indoor area or a calm outdoor space with no wind.
  • Gentle Controls: RC helicopters respond best to smooth, gentle inputs. Avoid sudden movements of the joysticks.
  • Battery Management: Always allow the helicopter's battery to cool down before recharging. This helps prolong battery life.
  • Pre-Flight Check: Before each flight, quickly check the blades for any damage and ensure all connections are secure.
  • Wind Conditions: While the helicopter is designed for indoor-outdoor use, strong winds can make it difficult to control. Fly in calm conditions for the best experience.

10. Warranty and Support

For any issues not covered in this manual, or for further assistance, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.