LYZRC JHD000016

Contents

LYZRC Z908 Pro MAX Drone Battery User Manual

Model: JHD000016 | Brand: LYZRC

1. Introduction

This manual provides essential information for the safe and effective use of your LYZRC Z908 Pro MAX Drone Battery. Please read this manual thoroughly before using the battery and retain it for future reference.

LYZRC Z908 Pro MAX Drone Battery
Figure 1: LYZRC Z908 Pro MAX Drone Battery (Grey variant)

2. Safety Information

WARNING: RECHARGEABLE LITHIUM ION BATTERY

  • Do not disassemble the battery.
  • Do not short circuit the battery terminals.
  • Do not expose the battery to high temperatures.
  • Do not dispose of the battery in fire.
  • Do not use the battery if it appears damaged or swollen.
  • Dispose of the battery properly according to local regulations.
Warning label on Z908 Pro MAX Drone Battery
Figure 2: Battery warning label detailing safety precautions.

3. Specifications

Attribute Value
Product Name Z908 Pro Max Drone Battery
Model Number JHD000016
Brand Name QINGFEI
Compatible Drone Brand LYZRC
Battery Type Li-ion (Lithium-ion)
Nominal Voltage 3.7 V
Capacity 2000 mAh
Weight 50g
Estimated Flying Time About 16 minutes
Color Options Black/Grey
Certification CE
High-concerned chemical None
Origin Mainland China
Battery life and voltage graphic
Figure 3: Visual representation of battery life (18 minutes) and voltage (3.7V).

4. Installation and Initial Setup

Before first use, ensure the battery is fully charged. Refer to the drone's instruction manual for specific battery compartment location and installation procedures.

  1. Carefully align the battery with the drone's battery compartment.
  2. Gently push the battery into place until it clicks or is securely seated. Ensure no wires are pinched.
  3. Verify that the battery is firmly connected and cannot easily dislodge during flight.

5. Charging Instructions

Use only the charger provided with your LYZRC Z908 Pro MAX drone or a compatible charger specified by the manufacturer. Improper charging can damage the battery or pose a fire hazard.

  1. Connect the battery to the appropriate charging cable.
  2. Plug the charger into a suitable power source.
  3. Monitor the charging process. Most chargers have indicator lights to show charging status (e.g., red for charging, green for fully charged).
  4. Once fully charged, disconnect the battery from the charger. Do not overcharge.

Note: Charging times may vary depending on the charger and battery's current state.

6. Operation

Once the battery is installed and fully charged, power on your drone according to its specific instructions. The battery provides power for flight and drone functions. Always ensure the battery is securely installed before operating the drone.

  • Power On: Follow your drone's manual to power on the device after battery installation.
  • Flight Duration: Expect approximately 16 minutes of flight time per charge, though this can vary based on flight conditions and drone usage.
  • Low Battery Warning: Pay attention to your drone's low battery indicators to land safely before the battery is completely depleted.

7. Care and Maintenance

  • Storage: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to store Li-ion batteries at approximately 50% charge.
  • Cleaning: Keep battery contacts clean and free from dust or debris. Use a dry, soft cloth to wipe the battery if necessary.
  • Inspection: Regularly inspect the battery for any signs of damage, swelling, or leakage. Discontinue use immediately if any issues are observed.
  • Temperature: Avoid operating or charging the battery in extreme hot or cold conditions, as this can affect performance and lifespan.

8. Troubleshooting

Problem Possible Cause Solution
Battery not charging Charger not connected properly; faulty charger/cable; damaged battery. Ensure secure connections. Try a different charger/cable. If battery is damaged, discontinue use and replace.
Drone not powering on Battery not installed correctly; battery depleted; battery faulty. Re-install battery securely. Charge battery fully. If issue persists, test with another battery if available.
Short flight time Battery not fully charged; old/degraded battery; aggressive flying style. Ensure full charge before flight. Battery capacity naturally decreases over time; consider replacement. Adjust flying style.

9. User Tips

Based on common user experiences, here are some tips for optimal battery performance:

  • Always carry spare batteries for extended flight sessions.
  • Allow batteries to cool down before recharging them after use.
  • Avoid completely draining the battery, as this can reduce its lifespan.

10. Statement of Compliance

Disclaimer:

⚠️For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.