EPever Tracer-AN Series

Contents

EPever MPPT Solar Charge Controller User Manual

Model: Tracer-AN Series

Brand: EPever

1. Overview

The EPever Tracer-AN series solar charge controller is based on a common negative design and advanced Maximum Power Point Tracking (MPPT) control algorithm. This product is designed to be artistic, economical, and practical, displaying its running status via an LCD. By improving the MPPT control algorithm, the Tracer-AN series minimizes maximum power point loss rate and time, quickly tracking the maximum power point of the PV array to obtain maximum energy from solar modules under various conditions. It can increase the ratio of energy utilization in the solar system by 10%-30% compared with traditional PWM charging methods. The controller includes a limitation function for charging power and current, and an automatic reducing charging power function to improve stability, even when connecting oversized PV modules or operating in high temperatures. A professional protection chip for the communication port further enhances reliability and meets diverse application requirements.

Key Features:

  • Advanced MPPT technology, with efficiency no less than 99.5%.
  • Ultra-fast tracking speed and guaranteed tracking efficiency.
  • Advanced MPPT control algorithm to minimize maximum power point loss rate and time.
  • Wide MPP operating voltage range.
  • High-quality components, perfecting system performance, with a maximum conversion efficiency of 98%.
  • Accurate recognition and tracking of multiple-peaks maximum power point.
  • International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life.
  • Charging power and current limitation function.
  • Compatible with lead-acid and lithium-ion batteries.
  • Battery temperature compensation function.
  • Real-time energy statistics function.
  • Overheating power reduction function.
  • Multiple load work modes.
  • The communication port adopts a professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection.
  • With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
  • Monitor and set the parameters via mobile phone APP or PC software.
  • Full-load operation without any drop in capacity within the range of working environment temperature.
  • Extensive electronic protection.

Video: Overview of EPever MPPT Solar Charge Controller features and connection points.

2. Setup

2.1 Components Overview

Labeled diagram of the MPPT Solar Charge Controller's external components

Figure 1: Labeled diagram of the MPPT Solar Charge Controller showing LCD display, SELECT and ENTER buttons, mounting holes, Remote Temp. Sensor terminal, Solar Panel terminal, Battery terminal, Load terminal, and RJ45 Communication Port.

2.2 Wiring Diagram

Follow the connection diagram carefully. Ensure all connections are secure before powering on the system.

Detailed connection diagram for the solar charge controller

Figure 2: Detailed connection diagram showing the solar charge controller connected to a PV panel, battery, DC load, optional inverter, and monitoring devices (laptop, MT50, eBox-WIFI-01, mobile app).

Connection Order:

  1. Connect Battery First
  2. Connect DC Load
  3. Connect Solar Panel (PV Panel)
  4. Connect Inverter (Optional)

Disconnection Order:

  1. Disconnect Inverter (Optional)
  2. Disconnect Solar Panel (PV Panel)
  3. Disconnect DC Load
  4. Disconnect Battery Last

2.3 Battery Type Setting

The controller supports various battery types. Set the correct battery type via the LCD display to ensure optimal charging and battery longevity.

LCD display showing various battery types and how to set them

Figure 3: LCD display interface for setting battery types, including Flooded (FLD), Gel, Sealed/AGM (SLD), User (USE), LiFePO4 (LI), and Li(NiCoMn)O2 (LI).

3. Operating Instructions

3.1 LCD Display Interface

The LCD provides real-time information about your solar system's performance. Use the SELECT and ENTER buttons to navigate through the display.

LCD display showing various parameters

Figure 4: LCD display showing various parameters such as PV input voltage, charging current, power generation, load work mode, battery voltage, battery current, discharge capacity, discharge current, and temperature.

3.2 Buttons

The controller features two buttons for navigation and selection:

Close-up of the SELECT and ENTER buttons

Figure 5: SELECT and ENTER buttons on the MPPT Solar Charge Controller.

  • SELECT Button: Used to browse through different display screens and menu options.
  • ENTER Button: Used to confirm selections or enter settings menus.

3.3 Load Work Modes

The controller supports multiple load work modes, which can be configured to suit your specific application needs. Refer to the detailed product manual for specific instructions on setting and customizing these modes.

4. Technical Specifications

The following table outlines the technical specifications for the Tracer-AN series solar charge controllers:

Table of technical specifications for Tracer AN series models

Figure 6: Technical specifications for Tracer AN series models (1206AN, 2206AN, 1210AN, 2210AN, 3210AN, 4210AN).

5. Maintenance

To ensure the longevity and optimal performance of your EPever MPPT Solar Charge Controller, regular maintenance is recommended:

  • Keep the controller clean and free from dust and debris.
  • Ensure proper ventilation around the unit to prevent overheating.
  • Periodically check all wiring connections for tightness and corrosion.
  • Inspect the unit for any signs of physical damage.
  • Verify that the LCD display is functioning correctly and showing accurate readings.

6. Troubleshooting

If you encounter any issues with your solar charge controller, consider the following general troubleshooting steps:

  • Check all connections: Ensure that the solar panel, battery, and load are correctly and securely connected according to the wiring diagram.
  • Verify battery voltage: Confirm that your battery voltage is within the acceptable range for the controller.
  • Inspect solar panels: Ensure solar panels are receiving adequate sunlight and are not obstructed or damaged.
  • Review error codes: If the LCD displays an error code, consult the full product manual for its meaning and recommended solutions.
  • Restart the system: Disconnect all power sources (solar, battery, load) in reverse order of connection, wait a few minutes, then reconnect in the correct order.

For persistent issues, please contact customer support.

7. User Tips

  • Many users find EPever products to be of high quality and reliable, often performing as expected or better than alternatives.
  • When considering accessories like Wi-Fi dongles for monitoring, be aware that some users have reported limited functionality (e.g., only basic local mode, no history, requires frequent reconnection) and that cloud features may not always work as anticipated. Evaluate if the extra cost is justified for your specific monitoring needs.

8. Warranty and Support

For detailed warranty information, technical support, or service inquiries, please refer to the official EPever website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.