1. Introduction
The Lemorele R1000 Wireless HDMI Extender system provides seamless high-definition video transmission over distances up to 200 meters. It features external 5DB high-gain Wi-Fi antennas and boasts a low latency of less than 50ms, ensuring a smooth viewing experience. The system is designed for versatility, supporting connections from a single transmitter (TX) to multiple receivers (RX), up to a maximum of four RX units, or to the TuTuPlay APP on mobile devices.
This device eliminates the need for complex wiring and configuration, offering a true plug-and-play experience for most setups. It is ideal for various applications including presentations, home entertainment, live streaming, and video production.
Important Note:
- A Receiver (RX) unit cannot function independently; it must be paired with a Transmitter (TX) unit. Separate RX units are available for users requiring additional display points.
- A Transmitter (TX) unit can operate independently by connecting to the TuTuPlay APP on up to four mobile devices (phones or tablets) as receivers.
Video: Overview of the Lemorele Wireless HDMI Extender's features and applications.
2. Package Contents
Please verify that all items are present and in good condition upon unpacking. The contents may vary slightly depending on the specific model purchased (e.g., 'Only RX', 'TX and RX', or 'TX and 2 RX').
Typical Package Contents (TX and RX Model - R1000):
- 1 x Transmitter (TX) Unit
- 1 x Receiver (RX) Unit
- 2 x Antennas (for TX and RX)
- 1 x User Manual
- 1 x HDMI Adapter
- 2 x 100cm USB-C Power Cables

Image: Contents of the R1000 (TX and RX) package, including transmitter, receiver, antennas, cables, and manual.
Variations:
- Only RX: 1 x Receiver (RX) Unit, 1 x Antenna, 1 x User Manual, 1 x 100cm USB-C Power Cable.
- TX and 2 RX (R1010): 1 x Transmitter (TX) Unit, 2 x Receiver (RX) Units, 3 x Antennas, 1 x User Manual, 1 x HDMI Adapter, 3 x 100cm USB-C Power Cables.

Image: Visual representation of the different product configurations and their components.
3. Setup Instructions
Follow these steps to set up your Lemorele Wireless HDMI Extender:
3.1 Initial Connection (Plug and Play)
- Connect the Transmitter (TX) unit to the HDMI output port of your source device (e.g., laptop, gaming console, camera).
- Connect the Receiver (RX) unit to the HDMI input port of your display device (e.g., TV, projector, monitor).
- Ensure both TX and RX units are powered using the provided USB-C cables connected to a 5V2A power source (not included).
- Wait approximately 5-10 seconds for the devices to establish a connection and begin projecting. No further action is typically required for initial setup.

Image: Visual guide for connecting the TX to a laptop and RX to a TV.
3.2 Manual Pairing (for separately purchased RX units)
If you have purchased an RX unit separately and it does not automatically pair with your existing TX unit, follow these steps:
- On the Receiver (RX) unit: Press and hold the function button for over 5 seconds. A prompt will appear on the connected display, indicating 'Release the button to pair with the Lemorele TX!'.
- On the Transmitter (TX) unit: Press and hold the function button for over 5 seconds. The indicator light on the TX unit will flash rapidly, signifying that pairing has started.
- Wait for the indicator light on the TX unit to remain steady. This confirms a successful connection and pairing.

Image: Detailed steps for manual pairing of RX and TX units.
3.3 Power Supply Requirements
For optimal and stable performance, it is crucial to provide adequate power to both the Transmitter (TX) and Receiver (RX) units. Always use a 5V2A power supply for each unit. Insufficient power can lead to various issues, including connection failures, lagging, sudden disconnections, or display errors.

Image: Visual reminder for proper power supply connection.
4. Operating Instructions
4.1 Basic Operation
Once the TX and RX units are connected and powered, they will automatically establish a wireless link. The content from your source device will be mirrored or extended to the connected display. Ensure your source device's display settings are configured correctly for mirroring or extending the display.
4.2 Multi-Receiver Setup
The system supports connecting one Transmitter (TX) to up to four Receiver (RX) units simultaneously. This allows for broadcasting the same video content to multiple displays in different locations. Follow the manual pairing instructions (Section 3.2) for each additional RX unit.

Image: Example of 1 TX supporting up to 4 RXs in a large venue.
4.3 APP Monitoring (TuTuPlay)
The Lemorele Wireless HDMI Extender supports real-time monitoring via the TuTuPlay application, available for Android and iOS devices. This allows you to use your smartphone or tablet as an additional receiver.
- Download and install the 'TuTuPlay' app from your device's app store.
- Ensure your mobile device is connected to the same Wi-Fi network as the TX unit (or directly to the TX unit's Wi-Fi hotspot if available).
- Open the TuTuPlay app and follow the in-app instructions to connect to the TX unit. A single TX unit can support up to four TuTuPlay app connections.

Image: TuTuPlay app for mobile monitoring.
5. Troubleshooting
If you encounter issues with your Lemorele Wireless HDMI Extender, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No display / Screen casting unsuccessful | Insufficient power supply; Incorrect HDMI connection; Pairing issue. | Ensure both TX and RX units are powered by a 5V2A adapter. Verify HDMI cables are securely connected. If using a separately purchased RX, perform manual pairing (Section 3.2). |
| Video lagging / Stuttering / Sudden disconnection | Insufficient power supply; Excessive transmission distance; Obstructions; Interference. | Confirm 5V2A power supply. Reduce the distance between TX and RX. Minimize physical obstructions (walls, furniture). Avoid strong Wi-Fi or other wireless interference. |
| Display interface does not show SSD and password (for APP monitoring) | Insufficient power supply. | Ensure the TX unit is powered by a 5V2A adapter. Restart the TX unit and the TuTuPlay app. |
| RX unit not pairing automatically | New RX unit or previous pairing lost. | Perform manual pairing as described in Section 3.2. |
| Cannot connect to PC | Incorrect port or driver issue. | Ensure the TX unit is plugged into an HDMI output port on your PC. No special drivers are usually needed for the extender itself, but ensure your PC's graphics drivers are up to date. |
6. Specifications
| Feature | Description |
|---|---|
| Brand Name | Lemorele |
| Model | R1000 / R1010 Wireless HDMI Extender |
| Connector Type | Wireless (HDMI) |
| Resolution | 1080P@60HZ |
| Transmission Distance | Up to 200m (1TX to 1RX) Up to 130m (1TX to 2RX) Up to 100m (1TX to 3RX or 1TX to 4RX) |
| Latency | < 50ms |
| Wi-Fi Bands | 2.4G / 5G Dual-band with Adaptive Frequency Hopping |
| Max Receivers | 1 Transmitter supports up to 4 Receivers (RX) or 4 TuTuPlay APP connections |
| Video Codec | H.264 |
| Antenna | External 5DB high gain Wi-Fi antenna |
| Power Input | 5V2A (USB-C) recommended for each unit |
| Housing Material | Titanium Alloy |
| Certifications | CE, FCC |

Image: Transmission range based on the number of receivers.

Image: Dual-band Wi-Fi and Adaptive Frequency Hopping features.
7. Maintenance
To ensure the longevity and optimal performance of your Wireless HDMI Extender, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the units. Avoid using liquid cleaners or abrasive materials, which can damage the surface.
- Storage: When not in use for extended periods, store the units in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the units with care. Avoid dropping them or subjecting them to strong impacts.
- Connectivity: Periodically check all cable connections (HDMI, USB-C) to ensure they are secure and free from damage.
8. User Tips
Here are some helpful tips from other users and common inquiries to enhance your experience:
- Power is Key: Always prioritize using a stable 5V2A power adapter for both the transmitter and receiver. Many performance issues, such as lagging or disconnections, are resolved by ensuring adequate power.
- RX Units are Dependents: Remember that a standalone Receiver (RX) unit cannot function without being paired to a Transmitter (TX) unit. If you only have an RX, you'll need a TX to use it.
- TX Versatility: The Transmitter (TX) unit can be used independently with the TuTuPlay app, turning your mobile device into a display. This is great for monitoring or personal viewing.
- PC Compatibility: The system is fully compatible with PCs. Simply connect the TX to your PC's HDMI output. It can also broadcast from a PC to multiple screens using additional RX units.
- Optimal Placement: For best transmission range and stability, try to minimize physical obstructions (walls, large furniture) between the TX and RX units.
9. Warranty and Support
9.1 Product Warranty
This product comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
9.2 Further Assistance
For more detailed information, technical support, or warranty inquiries, please refer to the official user manual PDF or contact Lemorele customer support.
Official User Manual (PDF): Download PDF