1. Introduction
The LEKATO MS-02 Wireless In-Ear Monitor System provides musicians and audio professionals with a reliable and convenient solution for personal audio monitoring. This 2.4G Stereo Wireless IEM System is designed for use in various settings, including studio recordings, band rehearsals, and live performances. It features automatic pairing between the transmitter and beltpack receiver, offering a tangle-free and high-quality audio experience.
2. Package Contents
Please verify that all items listed below are included in your package:
- 1 x Wireless Transmitter
- 1 x Wireless Receiver
- 2 x Type-C Charging Cables
- 1 x 3.5mm to 6.35mm Adapter
- 2 x 3.5mm Audio Cables
- 1 x User Manual

3. Product Features
The LEKATO MS-02 system offers a range of features designed for optimal performance:
- Ultra-Low Latency: Mono mode offers less than 4.5ms latency, while Stereo mode has less than 10.8ms latency for precise monitoring.
- High-Quality Audio: Equipped with a 24bit/48KHz high sampling rate for delicate and realistic sound quality.
- One-to-Many Connectivity: Supports a single transmitter sending signals to multiple receivers simultaneously (up to 4 pairs of devices).
- Extended Battery Life: Built-in rechargeable lithium battery provides 6-8 hours of continuous operation.
- Volume Control: Receiver features 5-level volume adjustment for personalized sound levels.
- Mono/Stereo Switch: Easy one-key switch between mono and stereo input modes.
- Compact Design: Lightweight and clip-on structure for portability and ease of use.
- Wide Wireless Range: Up to 100 feet (30 meters) wireless range in open areas using 2.4GHz frequency technology.
- One-Key Mute: Instant mute function on the transmitter for critical moments during performance or practice.
4. Setup Guide
4.1 Charging the Devices
Before initial use, ensure both the transmitter and receiver are fully charged. Use the provided Type-C charging cables to connect the devices to a USB power source. The LED indicators will show the current battery level. A full charge provides approximately 6-8 hours of continuous operation.

4.2 Connecting the Transmitter
Connect the transmitter to your audio source using one of the supplied 3.5mm audio cables or the 3.5mm to 6.35mm adapter if needed. The transmitter can be connected to various devices such as:
- Mixers
- Computers
- Smartphones

4.3 Connecting the Receiver
Connect your headphones or monitoring device to the receiver's 3.5mm headphone jack. The receiver can be connected to:
- Headphones (In-Ear Monitors)
- Loudspeaker boxes
- Guitar Amplifiers

5. Operating Instructions
5.1 Power On/Off
To power on the transmitter and receiver, press and hold their respective power buttons until the indicator lights illuminate. To power off, press and hold the power buttons again until the lights turn off.
5.2 Automatic Pairing
The MS-02 system is designed for automatic pairing.
- Turn on the transmitter.
- Turn on the receiver.
- The devices should automatically pair. If not, press and hold the "PAIR" buttons on both the transmitter and receiver simultaneously until their indicator lights blink.
- Wait for the lights on both devices to become solid, indicating successful pairing.
5.3 Mono/Stereo Switch
The system supports both mono and stereo input modes. To switch between these modes, long-press the dedicated Mono/Stereo switch button on both the transmitter and receiver. Ensure both devices are set to the same mode (Mono or Stereo) for proper operation and pairing.

5.4 Volume Adjustment
The receiver unit features dedicated volume up (+) and volume down (-) buttons. Use these buttons to adjust the monitoring volume to your desired level. There are 5 distinct volume levels available.
5.5 One-Key Mute Function
The transmitter is equipped with a one-key mute button. Press this button to instantly mute the audio transmission. This is useful for quickly cutting off sound during live performances or rehearsals without having to power down the unit or disconnect cables.

5.6 One Transmitter to Multiple Receivers
The LEKATO MS-02 system supports connecting one transmitter to multiple receivers (up to 4 pairs of devices). To connect additional receivers:
- Ensure the transmitter is powered on and paired with the first receiver.
- Power on the additional receiver.
- Press and hold the "PAIR" buttons on the transmitter and the new receiver simultaneously until their indicator lights blink.
- Wait for the lights to become solid, confirming successful pairing. Repeat for any other receivers.

6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the devices. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Battery Care: To prolong battery life, avoid fully discharging the devices frequently. Charge them regularly, even if not in constant use.
- Avoid Moisture: Keep the devices away from water and high humidity to prevent damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from receiver. |
|
|
| Audio interference or dropouts. |
|
|
| Device not charging. |
|
|
| Mono/Stereo mode not working. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | LEKATO |
| Model | MS-02 |
| Color | Black |
| Wireless Communication Technology | 2.4 GHz Radio Frequency |
| Headphones Jack | 3.5 mm Jack |
| Ear Placement | In Ear (for monitoring headphones) |
| Frequency Response | 48 KHz |
| Item Weight | 5.3 ounces (approx. 150g) |
| Latency (Mono Mode) | <4.5ms |
| Latency (Stereo Mode) | <10.8ms |
| Sampling Rate | 24bit/48KHz |
| Battery Life | 6-8 hours (continuous operation) |
| Wireless Range | 100 feet / 30 meters (open area) |
9. User Tips
- Expand Your System: The MS-02 system is highly versatile. If you need to monitor audio for multiple performers or instruments, you can purchase additional receivers. The system supports one transmitter connecting to up to four receivers simultaneously.
- Optimal Placement: For the best wireless performance, try to maintain a clear line of sight between the transmitter and receiver(s). Avoid placing the units behind large metal objects or near other strong wireless signals.
- Battery Management: Keep an eye on the LED battery indicators. Charging the units before important sessions or performances will prevent unexpected power loss.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official LEKATO website. Keep your proof of purchase for any warranty claims.