Introduction
This manual provides essential instructions for the safe and efficient use of your Anker SOLIX F3800 Portable Power Station. The SOLIX F3800 is a high-capacity 3840Wh portable power station capable of delivering up to 6000W AC output, designed for versatile power needs, including solar charging capabilities.
Safety Information
- Read all instructions before using the product.
- Do not disassemble, repair, or modify the unit.
- Keep the unit away from water, fire, and extreme temperatures.
- Ensure proper ventilation during use and charging.
- Use only approved accessories and charging cables.
Package Contents
Verify that all items are present in your package:
- Anker SOLIX F3800 Portable Power Station
- AC Charging Cable
- Solar Charging Cable (if included in your specific bundle)
- User Manual (this document)
- Other accessories as specified on the product packaging.
Setup
- Unpacking: Carefully remove the power station and all accessories from the packaging.
- Initial Charge: Before first use, fully charge the power station using the provided AC charging cable. Connect the AC charging cable to the power station's AC input port and then to a wall outlet. The display will indicate charging status.
- Solar Panel Connection (Optional): If using solar panels, connect them to the power station's solar input port using the solar charging cable. Ensure the solar panels are placed in direct sunlight for optimal charging efficiency.
Operating Instructions
Turning On/Off
- To Turn On: Press and hold the main power button for a few seconds until the display illuminates.
- To Turn Off: Press and hold the main power button again until the display turns off.
Connecting Devices
- AC Output: Press the AC power button to activate the AC outlets. Plug your devices into the available AC ports. The SOLIX F3800 provides up to 6000W of AC power.
- DC Output: Press the DC power button to activate the DC ports (e.g., car charger port). Plug in your 12V DC devices.
- USB Output: Connect your USB devices to the USB-A or USB-C ports. These ports are typically always active when the unit is on.
Charging the Power Station
- AC Charging: Connect the AC charging cable to a wall outlet. The power station will automatically begin charging.
- Solar Charging: Connect compatible solar panels to the solar input port. Position the panels to receive maximum sunlight. The display will show solar input wattage.
Maintenance
- Storage: Store the power station in a cool, dry place, away from direct sunlight and extreme temperatures. For long-term storage, charge the unit to approximately 50-80% every 3-6 months to prolong battery life.
- Cleaning: Use a dry, soft cloth to clean the exterior of the power station. Do not use liquid cleaners or immerse the unit in water.
- Battery Care: Avoid fully discharging the battery frequently. Regular partial discharges and recharges are healthier for the battery's lifespan.
Troubleshooting
- Unit Not Turning On:
- Ensure the battery is not completely depleted. Charge the unit for at least 30 minutes.
- Press and hold the power button firmly for several seconds.
- No Output from Ports:
- Verify that the specific output (AC, DC, USB) is activated via its respective button.
- Check if the device you are trying to power exceeds the power station's output limits.
- Ensure cables are securely connected.
- Slow Solar Charging:
- Reposition solar panels for maximum direct sunlight exposure.
- Clean solar panel surfaces from dust or debris.
- Check solar charging cable connections.
Specifications
| Feature | Specification |
|---|---|
| Model | SOLIX F3800 |
| Brand | Anker |
| Battery Capacity | 3840Wh |
| AC Output Power | 6000W (Pure Sine Wave) |
| Charging Methods | AC Wall Outlet, Solar Panel |
| Output Ports | AC, DC, USB-A, USB-C (specific quantities may vary by model variant) |
User Tips
- Verify Package Contents: Upon receiving your Anker SOLIX F3800, carefully check the packaging and contents against the included packing list to ensure all components, including solar panels if part of your order, are present.
- Optimal Solar Placement: When using solar panels, adjust their angle throughout the day to track the sun's movement for maximum charging efficiency.
- Monitor Display: Regularly check the power station's display for real-time information on battery level, input/output wattage, and any error indicators.
Warranty & Support
The Anker SOLIX F3800 Portable Power Station comes with a factory warranty. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included in your product packaging or contact the manufacturer directly.
For technical support or service inquiries, please contact Anker customer service through their official website or the contact information provided with your purchase. Ensure you have your product model and serial number ready when contacting support.
