1. Introduction
Thank you for choosing the LIGE Luxury Quartz Watch. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new timepiece. Please read it carefully to ensure optimal performance and longevity of your watch.
2. Watch Components and Functions
Your LIGE Luxury Quartz Watch features a multi-functional design with several key components:
- Crown: Used for adjusting time and date.
- Pushers: Control the chronograph functions (Start/Stop, Reset).
- Main Dial: Displays hours, minutes, and seconds.
- Sub-dials: Include 24-hour display, chronograph minutes, and chronograph seconds.
- Moon Phase Display: Indicates the current phase of the moon.
- Date Window: Displays the current date.
- Luminous Hands and Markers: Glow in the dark after absorbing light.
3. Setup and Adjustment
3.1 Setting the Time
- Pull the crown out to the furthest position (position 2).
- Turn the crown to move the hour and minute hands to the desired time. Pay attention to the 24-hour sub-dial to ensure AM/PM is correctly set if applicable.
- Push the crown back into its normal position (position 0) to start the watch.
3.2 Setting the Date
- Pull the crown out to the middle position (position 1).
- Turn the crown clockwise or counter-clockwise (depending on the model) to set the correct date in the date window.
- Once the date is set, push the crown back into its normal position (position 0).
Note: Avoid setting the date between 9 PM and 3 AM, as this can interfere with the automatic date change mechanism and potentially damage the movement.
3.3 Operating the Chronograph
- Start/Stop: Press the top pusher to start the chronograph. Press it again to stop.
- Reset: With the chronograph stopped, press the bottom pusher to reset all chronograph hands to zero.
4. Operating Features
4.1 Luminous Display
The watch features a strong luminous display. The hands and markers automatically emit light after absorbing enough light source, making it easy to read in low-light conditions.
4.2 Moon Phase Display
The watch includes a moon phase sub-dial, which visually tracks the lunar cycle. This feature is automatically synchronized with the time setting.
4.3 Product Video Overview
5. Maintenance and Care
5.1 Water Resistance Guidelines
Your LIGE watch is rated for 3ATM (30 meters) water resistance. This means it is suitable for:
- Rain exposure
- Washing hands
- Car washing
- Cold water bathing (brief exposure)
It is NOT suitable for swimming, diving, hot water bathing, or prolonged submersion. Do not operate the crown or pushers while the watch is wet or submerged, as this can compromise the water seal.
5.2 Cleaning
To maintain the appearance of your watch:
- Wipe the case and glass with a soft, dry cloth.
- For the leather strap, avoid excessive moisture. If it gets wet, dry it gently with a soft cloth and allow it to air dry completely.
- Avoid using chemical cleaners, as they can damage the watch's finish and strap material.
5.3 Glass Care
The watch features Ore High Hardening Glass, which is scratch-proof, wear-resistant, and offers good light transmission. While durable, avoid unnecessary impacts to prevent damage.
5.4 Strap Care
The leather strap is handmade, soft, comfortable, breathable, and sweatproof. To prolong its life:
- Avoid prolonged exposure to direct sunlight or extreme temperatures.
- Keep it away from harsh chemicals and solvents.
- Clean with a damp cloth and mild soap if necessary, then dry thoroughly.
6. Troubleshooting
6.1 Watch Has Stopped
- Battery: If the watch has stopped completely, the battery may need replacement. Consult a professional watch repair service.
- Crown Position: Ensure the crown is fully pushed in (position 0). If it's pulled out, the watch will not run.
6.2 Date Not Changing
- Time Setting: Ensure the time is set correctly, especially the AM/PM cycle. The date typically changes around midnight.
- Manual Adjustment: If the date is stuck, try manually advancing it using the crown in position 1.
6.3 Chronograph Not Resetting to Zero
- Reset Procedure: Ensure the chronograph is stopped before pressing the reset pusher.
- Calibration: If the chronograph hands do not align to zero after resetting, the movement may require calibration by a professional.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | LG89107 |
| Brand Name | LIGE |
| Movement | Quartz |
| Dial Diameter | 42 mm |
| Case Thickness | 11 mm |
| Band Length | 240 mm |
| Band Width | 22 mm |
| Watch Weight | 52g |
| Case Material | Stainless Steel |
| Band Material Type | Leather |
| Clasp Type | Buckle |
| Dial Window Material Type | Hardlex (Ore High Hardening Glass) |
| Water Resistance Depth | 3Bar (30 meters) |
| Features | Stop Watch, Back Light, Shock Resistant, Luminous, Auto Date, Chronograph, Complete Calendar, Moon Phase, Water-Resistance, Luminous Hands |
| Style | Fashion & Casual |
| Certification | CE |
8. Warranty and Support
Your LIGE watch comes with a warranty card included in the package. Please refer to this card for specific warranty terms, conditions, and duration. For any support inquiries or service needs, please contact the seller or an authorized LIGE service center.
9. User Tips
- Regular Cleaning: A quick wipe with a soft cloth daily can keep your watch looking new and prevent dirt buildup.
- Avoid Extreme Temperatures: Exposure to very high or low temperatures can affect the watch's accuracy and battery life.
- Magnetic Fields: Keep your watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices) as they can interfere with the quartz movement.
- Secure the Crown: Always ensure the crown is fully pushed in when not adjusting the time or date to maintain water resistance.
- Proper Storage: When not wearing your watch, store it in a cool, dry place, preferably in its original box or a watch case to protect it from dust and scratches.
