Leadfan 10.1 Inch Wireless Car Radio User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Leadfan 10.1 Inch Wireless Car Radio. Designed specifically for Toyota Highlander models from 2014 to 2019, this HD touchscreen car video player integrates advanced features such as GPS navigation, wireless CarPlay, Android Auto, Bluetooth 5.1, and a rear camera for an enhanced driving experience. Please read this manual thoroughly before using the product to ensure proper function and safety.

Safety Information

• Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation to prevent electrical shorts and damage.
• Professional installation is recommended for optimal performance and safety.
• Do not operate the device in a manner that distracts you from driving. Always prioritize road safety.
• Keep the device away from water and moisture to prevent damage.
• Use only approved accessories and wiring harnesses provided with the unit or recommended by the manufacturer.
• The unit operates on a 12V power supply. Exceeding this voltage may cause damage.

Package Contents

Verify that all items are present in the package:

Figure 1: Package List and Wiring Diagram

• 10.1 Inch Car Radio Main Unit
• Backup Camera
• GPS Antenna
• RCA Cable
• USB Cable (x2)
• Power Cable
• Original USB Adapter
• Canbus
• User Manual (this document)

Specifications

Setup and Installation

This car radio is designed for a "Plug and Play" installation in Toyota Highlander models from 2014 to 2019. However, professional installation is highly recommended.

Compatibility Notes:

• Toyota Highlander 2014-2019: The unit is compatible with these models.
• JBL Amplifier: If your Toyota Highlander has a JBL amplifier, you will need to purchase additional JBL harnesses for proper sound decoding.
• Factory Original Onstar System: This unit is NOT compatible with vehicles that have a factory original Onstar system.

Figure 2: Installation in Toyota Highlander (2014-2019)

Wiring Diagram:

Refer to the detailed wiring diagram below for connecting the various components. Ensure all connections are secure before powering on the unit.

Figure 3: Main Wiring Harness Connections

General Installation Steps (Consult a professional if unsure):

1. Disconnect the vehicle's battery.
2. Carefully remove the factory radio and trim panels.
3. Connect the main power harness, RCA cables, USB cables, GPS antenna, and backup camera cable to the corresponding ports on the new head unit.
4. If your vehicle requires a Canbus decoder, connect it as per the wiring diagram.
5. Mount the backup camera in the desired location (e.g., near the license plate) and route its cable to the head unit.
6. Connect the GPS antenna and position it for optimal signal reception (e.g., on the dashboard).
7. Secure the new car radio into the dashboard opening.
8. Reconnect the vehicle's battery and test all functions before reassembling the trim panels.

Operating Instructions

Your Leadfan car radio features an intuitive Android 12 operating system with a responsive touchscreen. Below are instructions for key functions.

Basic Operation:

• Power On/Off: Press and hold the power button (usually on the side panel) to turn the unit on or off. A short press typically mutes/unmutes audio.
• Touchscreen Navigation: Swipe left/right to navigate between home screens, tap icons to open applications.
• Volume Control: Use the physical buttons on the side panel or the on-screen controls.

Wireless CarPlay & Android Auto:

Figure 4: Wireless CarPlay and Android Auto in Action

1. Ensure your phone's Bluetooth and Wi-Fi are enabled.
2. On the car radio, open the "Zlink" application.
3. For iPhone (CarPlay): Pair your iPhone with the car radio via Bluetooth. Once paired, CarPlay should automatically launch or prompt you to connect.
4. For Android Phone (Android Auto): Ensure "Android Auto" app is installed on your phone. Pair your Android phone with the car radio via Bluetooth. Android Auto should then connect wirelessly.
5. You can now access phone features like music, GPS navigation, calls, and messages directly on the car radio screen. Voice assistants (Siri/Google Assistant) are also supported.

Note: If CarPlay or Android Auto does not work, try restarting your phone. For wired connections (if preferred), use original USB cables to avoid connection issues.

GPS & WiFi Navigation:

Figure 5: GPS Navigation and WiFi Hotspot Features

• Offline Maps: The unit comes with built-in offline maps. Access them via the navigation app.
• Online Maps & Apps: Connect the unit to a Wi-Fi hotspot (e.g., from your phone) to use online maps, stream videos (YouTube), or download other applications from the app store.

Bluetooth 5.1:

Figure 6: Bluetooth 5.1 Connectivity

• Hands-Free Calling: Pair your phone via Bluetooth to make and receive calls safely. The unit has a built-in microphone.
• Bluetooth Music: Stream audio wirelessly from your phone for a high-quality listening experience.
• Phonebook: Import your phone's contacts for easy access.

FM Radio:

Figure 7: FM Radio and DSP EQ Settings

• Access the FM Radio application.
• Use the on-screen controls to scan for stations automatically or manually tune to a specific frequency.
• Save your favorite stations as presets.

Split Screen Function:

Figure 8: Split Screen Multitasking

The split-screen feature allows you to run two applications simultaneously on the display, such as navigation and music playback. Consult the Android 12 system settings for instructions on how to activate and manage split-screen mode.

Steering Wheel Control (SWC):

Figure 9: Steering Wheel Control Setup

To use your vehicle's steering wheel controls with the car radio, you need to manually configure them in the unit's settings. Navigate to the SWC learning section in the settings menu and follow the on-screen prompts to assign functions to your steering wheel buttons.

Rear View Camera:

Figure 10: Rear View Camera Display

When the vehicle is shifted into reverse, the car radio will automatically display the feed from the connected rear view camera, providing a clear view of the area behind your vehicle for safer parking and maneuvering. The included camera features IP68 waterproofing and IR night vision.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the touchscreen and unit exterior. Avoid abrasive cleaners or solvents.
• Software Updates: Periodically check for software updates through the unit's settings menu (requires Wi-Fi connection) to ensure optimal performance and access to new features.
• Temperature: Avoid exposing the unit to extreme temperatures, which can affect its lifespan and performance.

Troubleshooting

User Tips

• Customize Your Home Screen: Take advantage of the Android 12 OS to personalize your home screen with frequently used apps and widgets for quick access.
• Optimize Audio: Experiment with the DSP EQ settings (Figure 7) to fine-tune the audio output to your preference and vehicle acoustics.
• Regular Cleaning: A quick wipe of the screen with a microfiber cloth can significantly improve visibility and touch responsiveness.
• Power Cycle for Issues: If you encounter minor glitches or app freezes, a simple restart of the unit (or your connected phone for CarPlay/Android Auto issues) can often resolve them.

Warranty and Support

Your Leadfan car radio comes with a 12-month after-sales support period. For any installation or operation problems, 24-hour technical support is available. Please contact the seller for assistance.