Introduction
The Yikong YK4107 is a 1/10 scale electric remote control four-wheel drive off-road climbing vehicle, featuring dual speed transmission and differential lock capabilities. Designed for enthusiasts, this model offers robust performance and realistic crawling experience. This manual provides essential information for the safe and effective operation and maintenance of your YK4107.

Yikong YK-4107 1:10 RC 4WD Crawler models.
Safety Information
WARNING: This model is a valuable item, not a toy. Operate strictly according to the instructions. If you have any questions, please contact customer service for professional guidance.
Battery Safety Guidelines
Under normal use, the battery is risk-free. Please strictly follow the precautions below for charging and using lithium batteries. By purchasing this product, you acknowledge that you have carefully read and fully understood the instructions and agree to strictly follow them for the use of your purchased battery. You also acknowledge that any property damage or personal injury caused by not strictly following the instructions is not related to our company's products.
- Do not use chargers designed for NiCd, NiMH, or other battery types to charge Lithium Polymer (LiPo) batteries. Use a LiPo-specific charger and ensure balanced charging using the balance connector (white or black XH plug, 2S, 3S, etc.). Incorrect use carries the risk of battery combustion or explosion!
- Do not charge unattended.
- Do not overcharge (voltage per cell should not exceed 4.25V).
- When charging, ensure the charging surface or platform can withstand high temperatures.
- Never allow the battery to overheat. Batteries exceeding 60°C pose a safety hazard and can even ignite.
- During charging, keep the battery away from or do not place it directly on flammable materials such as paper, plastic, carpets, vinyl, leather, wood, or directly on the model itself. Never charge in a car.
- Do not over-discharge (voltage per cell should not drop below 3.3V). Over-discharge can damage the battery, causing it to swell.
- Do not expose the battery to liquids, and do not store it in damp places.
- Keep the battery away from open flames or heat sources.
- Do not disassemble or reassemble battery cells, or combine disassembled cells with others, as this is dangerous (without specialized assembly tools, it can cause short circuits and combustion).
- Keep batteries out of reach of children.
- If a collision occurs during use, remove the battery. Carefully inspect the battery and connectors for damage as a precaution.
- Caution: Battery may become hot to the touch!
- Do not allow electrolyte to come into contact with eyes or skin. If contact occurs, immediately rinse with clean water. In severe cases, seek medical attention immediately.
- Do not arbitrarily disassemble, reassemble, or alter battery wiring.
- Carefully check battery voltage and charge status before charging or use.
- Do not short circuit (reverse polarity).
- Do not directly touch leaking batteries.
- Charge within 0-45°C temperature range!
- Use a LiPo safe bag when charging.

Detailed battery safety instructions.
Setup
Unboxing and Initial Inspection
Your YK4107 model is delivered in a 'Ready-to-Go' state, meaning minimal assembly is required. The package includes the RC car, operating instructions, and a remote controller. Carefully remove all components from the original box and inspect for any visible damage.
Battery Installation
The YK4107 is an electric model but does not include batteries. You will need to purchase a compatible LiPo battery and charger separately. The battery box is designed to adapt to various battery sizes. Ensure the battery is fully charged according to the safety guidelines before installation.

Battery box adaptable to various battery sizes.
Transmitter and Receiver Setup (if applicable)
While the model is Ready-to-Go, some configurations may involve optional transmitter, receiver, and ESC sets. Ensure your chosen components are correctly connected and bound according to their specific instructions. Common optional sets include:
- FS1111 11-Channel Transmitter / 60A 3-in-1 ESC with XT60
- X10P-35010 10-Channel Transmitter / X10F (G) 10-Channel Receiver / 1060 ESC

Optional transmitter, receiver, and ESC group sets.
Operating
Basic Controls
The remote controller allows for precise control of your YK4107. Use the throttle to control forward and reverse movement, and the steering wheel for direction.

Remote control with throttle and brake functions.
Special Features
- Tank U-turn Function: This innovative DIG function allows for remote-control locking of a single rear wheel, enabling a tighter turning radius. To activate, press the Channel 4 button on the transmitter. The rear differential lock will be released automatically.

Tank U-turn function in action.

Activating the Tank Turn Function.
- Dual Speed Transmission & Differential Lock: The remote control allows for locking the front and rear differentials and switching between two speeds (high and low) for versatile driving on different terrains.
- Driving Modes: Switch between 'Normal mode' and 'Competition mode' using the dedicated switch on the transmitter.
- Adjustable Drag Brake: The drag brake strength can be adjusted directly from the transmitter for enhanced control on inclines and descents.
- Lighting Control: Use the lighting control button on the transmitter to manage the vehicle's LED lights.

Remote control differential lock and 2-speed transmission.
Product demonstration video showcasing the YK4107's off-road capabilities.
Maintenance
General Cleaning
After each use, especially in dusty or muddy conditions, clean your YK4107 to prevent dirt buildup from affecting performance. Use a soft brush or compressed air to remove loose debris. For stubborn dirt, a damp cloth can be used, ensuring no water enters electronic components.
Battery Care and Storage
Refer to the 'Battery Safety Guidelines' in the Safety Information section for detailed instructions on proper battery care, charging, and storage. For long-term storage, it is recommended to charge LiPo batteries to 40% capacity (3.75-3.85V per cell) to maintain their stability and lifespan. Perform a charge-discharge cycle every 3 months for unused batteries.
Component Inspection
Regularly inspect all moving parts, including the full metal gears, all-vehicle ball bearings, and shock absorbers, for wear or damage. Ensure all screws are tight and no parts are loose. Replace any worn or damaged components promptly to maintain optimal performance.

Internal components and features of the YK4107.
Troubleshooting
If you encounter issues with your YK4107, consider the following common troubleshooting steps:
- No Power/No Response: Check battery charge level and ensure it's correctly connected. Verify the remote controller has fresh batteries and is properly bound to the receiver.
- Loss of Control/Erratic Behavior: Ensure you are within the remote control's range (approx. 100 meters). Check for interference from other 2.4GHz devices. Inspect all wiring connections for looseness or damage.
- Motor Not Responding: Check the ESC connection to the motor and receiver. Ensure the motor is free of obstructions.
- Reduced Performance: This could indicate a low battery, worn gears, or issues with the motor or ESC. Inspect these components and replace as necessary.
- Unusual Noises: Investigate any grinding or clicking sounds. This often points to debris in the gears or worn bearings.
For persistent issues, please refer to the Warranty and Support section for guidance on contacting customer service.
Specifications
| Attribute | Detail |
|---|---|
| Brand Name | MN MODEL |
| Model Number | YK 4107 |
| Scale | 1:10 |
| Dimensions | 521mm (Length) * 267mm (Width) |
| Wheelbase | 325mm |
| Remote Distance | About 100 meters |
| Control Channels | 6 channels (base), 10-11 channels (optional transmitters) |
| Controller Mode | MODE2 |
| Material | Metal, Plastic |
| State of Assembly | Ready-to-Go |
| Is Electric | Yes (No Battery Included) |
| Certification | CE |
| Recommend Age | 14+ years |
| Motor | 550 brush motor |
| ESC | 60A three-in-one ESC (with XT60) or 1060 ESC (optional) |
| Shock Absorbers | All-metal oil pressure shock absorber set |
| Bearings | All-vehicle ball bearing |
| Axles | Front and rear portal axles with high ground clearance |
| Body | 1.2mm PC car shell (transparent window) |
| Colors Available | Dark Blue, Slate Gray (Rock gray), Aqua Green (Hydro Blue) |
Gear Ratio Parameters
| Motor Teeth | Low Speed Gear Ratio | High Speed Gear Ratio |
|---|---|---|
| 12T | 81.95 | 35.20 |
| 13T | 75.70 | 32.50 |
| 15T (Original Standard) | 65.60 | 28.20 |

Chassis design, dimensions, and gear ratio parameters.

YK4107 color options and dimensions.
User Tips
- Safety First: The model is relatively fast. Always operate with caution and in a safe environment, away from people, pets, and obstacles.
- Battery Longevity: Adhere strictly to the battery charging and storage guidelines to maximize the lifespan and performance of your LiPo batteries.
- Terrain Awareness: Utilize the dual speed transmission and differential lock features to adapt to various terrains, enhancing climbing and off-road capabilities.
Warranty and Support
Warranty service is limited to electronic accessories. Other damaged parts need to be purchased and replaced by yourself. The warranty period for electronic accessories varies by brand according to the factory's unified policy; please consult customer service for details.
If you have any questions or require professional guidance, please contact customer service.

Important information on warranty and support.