1. Introduction
Thank you for choosing the BUTURE 6000A Car Jump Starter with integrated 160PSI Air Pump. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires and other inflatables, and serve as a portable power bank and emergency light source. Please read this manual carefully before use to ensure safe and optimal performance.
Image: The BUTURE 6000A Jump Starter, showcasing its main unit, jump starter clamps, and integrated air hose, along with included gloves.
2. Package Contents
Please check the package for the following items:
- BUTURE 6000A Jump Starter Unit
- Smart Jump Starter Clamps (Red and Black)
- Air Hose with Schrader Valve Connector
- Various Air Nozzles (for balls, bicycles, etc.)
- USB-C Charging Cable
- USB-A to USB-C Cable
- Protective Gloves
- Quick Start Guide
Image: All items included in the package: the jump starter unit, smart clamps, air hose, various nozzles, USB cables, gloves, and a quick start guide.
3. Safety Information
Always observe the following safety precautions when using the BUTURE 6000A Jump Starter:
- Do not allow the red and black clamps to touch each other.
- Do not jump start a frozen battery.
- Do not use the device if cables or clamps are damaged.
- Keep out of reach of children.
- Store in a cool, dry place away from direct sunlight.
- Ensure proper ventilation during use.
Built-in Protections:
The device is equipped with 10 types of protection for safe operation:
- Over-charge Protection
- Over Current Protection
- Short Circuit Protection
- Over Heat Protection
- Extreme Temperature Protection
- Over-voltage Protection
- Reverse Connection Protection
- Low Voltage Protection
- Over-load Protection
- Spark-proof Protection
Image: A visual representation of the 10 safety protections, including over-charge, over current, short circuit, over heat, extreme temperature, over-voltage, reverse connection, low voltage, over-load, and spark-proof protection.
4. Specifications
| Feature | Specification |
|---|---|
| Peak Current | >1200 A (6000A) |
| Battery Capacity | 18000-20000 mAh |
| Number Of Built-in Batteries | 4 |
| Conversion Rate | 85%~90% |
| Item Weight | 2.1 kg |
| External Testing Certification | ROHS, FCC, CE, CCC |
| Inflator Pressure | Up to 160 PSI |
| Charging Input | PD 45W USB-C (0-80% in 1.5 hours) |
| USB Output 1 | 18W |
| USB Output 2 | 18W |
| USB-C Output | 45W |
| Flashlight Lumens | 600 Lumens |
| Standby Time | Up to 24 Months |
5. Initial Setup and Charging
5.1 Initial Charge
Before first use, fully charge the jump starter. Connect the included USB-C charging cable to the device's PD 45W input port and a compatible 45W wall charger (not included). The device can charge from 0% to 80% in approximately 1.5 hours. A 10-minute charge from empty can provide enough power for a jump start.
Image: The jump starter's side view, highlighting the USB-C port for PD 45W fast charging, capable of making the device ready for jumping after just 10 minutes of charging from 0%.
5.2 Understanding the LED Screen
The large LED screen provides crucial information at a glance, including operational status, battery level, and potential error messages. Familiarize yourself with the display icons and readings.
Image: A detailed view of the large and informative LED screen, showing battery percentage, pressure units (PSI, BAR, KPA, Kg/cm²), power output (W), and various status icons.
6. Operating the Jump Starter
The BUTURE 6000A is designed to start dead vehicles in seconds, supporting all gas engines and diesel engines up to 12.0L.
6.1 How to Jump Start Your Car:
- Connect the Clamps: Connect the red (+) clamp to the positive terminal of your car battery and the black (-) clamp to the negative terminal. Ensure a secure connection.
- Activate BOOST Mode: Press the power button on the jump starter. Then, long press the 'BOOST' button for 3 seconds until the LCD screen displays "BOOST".
- Start Your Car: Once "BOOST" is displayed, start your car engine.
- Disconnect: After the car starts, immediately disconnect the clamps from the car battery.
Image: A three-step diagram illustrating the car jump-starting process: 1. Connect clamps correctly. 2. Press power and long-press BOOST until 'BOOST' appears on the screen. 3. Start the car engine.
6.2 Manual Override (Force Start Function)
For completely flat batteries, the device features a 'Force Start Function'. This allows you to start batteries with extremely low voltage. Refer to the quick start guide for specific instructions on engaging this mode if needed.
Image: The BUTURE Jump Starter Beta07 connected to a car battery, emphasizing its 6000A peak power, compatibility with all gas and 12.0L diesel engines, and manual override capability.
7. Operating the 160PSI Air Pump
The super-fast cordless inflator can inflate car tires, motorcycle tires, bicycle tires, sports balls, and more, with a maximum pressure of 160 PSI. It features smart preset and auto-stop functions to prevent over-inflation.
7.1 How to Inflate Your Tires:
- Connect the Air Hose: Connect the air hose to the inflator port on the jump starter and tighten it securely onto the tire valve.
- Select Mode & Set Pressure: Press the 'M' button to select the inflation mode (Car, Motorcycle, Bicycle, Ball). Press the 'T' button to cycle through pressure units (PSI, BAR, KPA, Kg/cm²). Use the '+' or '-' buttons to set your desired pressure value.
- Start Inflation: Long press the 'T' button to start inflation. The pump will automatically shut off once the preset pressure value is reached.
Image: A three-step diagram showing how to inflate tires: 1. Connect and tighten the air hose. 2. Use 'M' and 'T' buttons to select mode/unit, and '+/-' to set pressure. 3. Long press 'T' to start inflation, which auto-stops at the preset value.
Image: The jump starter actively inflating a car tire, demonstrating its super-fast cordless inflator capability for various items like cars, motorcycles, bicycles, and balls, with a maximum pressure of 160 PSI.
8. Charging External Devices (Power Bank Function)
The BUTURE 6000A is more than just a jump starter; it's a powerful portable power bank with multiple output ports to quickly charge your devices simultaneously. It supports over 1,000 recharge cycles.
- USB 1 (OUT): 18W output
- USB 2 (OUT): 18W output
- USB-C (IN/OUT): 45W input/output
Connect your electronic devices (phones, tablets, smartwatches, etc.) to the appropriate USB ports using their charging cables.
Image: The jump starter connected and charging a smartphone, tablet, and smartwatch, illustrating its capability to quickly charge multiple devices with its 18W USB-A and 45W USB-C ports.
9. Emergency Lights (600 Lumens Flashlight)
The device features a powerful 600 lumens flashlight with multiple modes for various emergency situations, providing a sense of safety and utility in the dark.
- White Flashlight: Standard illumination.
- White Strobe: For signaling or attracting attention.
- Orange Strobe: An alternative strobe color.
- White SOS: International distress signal.
Refer to the device's buttons for cycling through the different light modes.
Image: The jump starter illuminating an engine bay with its 600 lumens emergency light, demonstrating its utility as a flashlight, strobe, and SOS signal.
10. Maintenance and Storage
- Recharge Regularly: To maintain battery health, recharge the jump starter every 3-6 months, even if not in use. The device boasts a 24-month standby time, but regular top-ups are recommended.
- Cleanliness: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Storage: Store the jump starter in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
- Cable Care: Inspect the jump starter clamps and cables for any damage before each use.
11. Troubleshooting
- Device Not Turning On: Ensure the device is charged. If the battery is completely depleted, charge it for at least 10 minutes before attempting to turn it on or jump start.
- Car Not Starting:
- Check that the clamps are securely connected to the correct battery terminals (red to positive, black to negative).
- Ensure the "BOOST" mode is activated on the jump starter's screen.
- The car battery might be severely discharged. Try using the manual override (force start) function if available and safe to do so.
- Inflator Not Working:
- Check that the air hose is securely connected to both the jump starter and the tire valve.
- Ensure the desired pressure is set and the inflation mode is selected.
- Verify the device has sufficient charge.
- Error Messages on Screen: The large LED screen is designed to display operational status and possible errors. Consult the quick start guide for specific error code interpretations.
12. User Tips
- Battery Capacity: The device has a high battery capacity of 18000-20000 mAh, providing multiple jump starts and charges for your devices.
- Included Cables: Yes, the necessary jump starter cables (clamps) are included in the package.
- Pre-charge for Emergencies: Always keep your jump starter charged, especially before long trips, to be prepared for unexpected situations.
- Check Tire Pressure Regularly: Utilize the built-in air pump to maintain optimal tire pressure, which improves fuel efficiency and tire longevity.
13. Warranty and Support
Your BUTURE 6000A Jump Starter is covered by a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided in your quick start guide or on the official BUTURE website.
