BUTURE Beta08 Portable Jump Starter
Quick-Start Guide
Version 1.0
Product Overview
The BUTURE Beta08 is a portable jump starter designed to help start vehicles and charge electronic devices.
Device Components:
- 1 Power Button ⏻: Used to turn the device on/off and activate functions.
- 2 Power Indicator: Displays the battery level with LED bars (25%, 50%, 75%, 100%).
- 3 Lights: LED indicators for various functions.
- 4 Jump-Start Port: Connection point for the smart clamps.
- 5 USB Output: Port for charging electronic devices.
- 6 USB-C Input: Port for charging the jump starter itself.
Smart Clamp Details:
The smart clamp connector attaches to the jump starter. It includes:
- Smart Clamp Connector: Connects to the jump starter.
- Black Clamp (Negative): Connects to the negative terminal of the car battery.
- Red Clamp (Positive): Connects to the positive terminal of the car battery.
The smart clamp also features an indicator light for connection status.
Charging the Jump Starter
To charge the BUTURE Beta08 jump starter:
- Insert the charging cable into the USB-C input port (6).
- Connect the other end of the cable to a 5V/2A or higher power adapter (adapter not included).
Tips:
- Each bar on the power indicator represents 25% of the battery charge.
- Ensure the device is fully charged before its first use.
Charging Electronic Devices
You can use the jump starter as a power bank to charge other devices:
- Plug your device's charging cable into the USB Output port (5).
- Connect the cable to your electronic device (e.g., smartphone).
- Press the Power Button (1) ⏻ to begin charging.
Using the LED Emergency Light
The jump starter features an LED emergency light with multiple modes:
- To turn on: Press and hold the Power Button (1) ⏻ for 2 seconds.
- To cycle through modes: Short press the Power Button (1) ⏻. Modes include: Lighting ?, Strobe ?, Strobe (Orange) ?, SOS ?.
- To turn off: Press and hold the Power Button (1) ⏻ for 2 seconds in any mode.
How to Jump Start Your Car
Follow these steps to jump start a vehicle:
- Connect Clamps to Jump Starter: Connect the smart clamps to the Jump-Start Port (4). Wait for the indicator on the smart clamp to flash green.
- Connect Clamps to Car Battery:
- Connect the Red Clamp (+) to the positive (+) terminal of the car battery.
- Connect the Black Clamp (-) to the negative (-) terminal of the car battery.
- Start the Car Engine: Start the car engine within 30 seconds of the indicator turning solid green.
Note:
- Ensure the jump starter's battery level shows at least two bars (50% charge) before use to avoid low-voltage protection, which may cause a failed start.
- Do not attempt to start the vehicle continuously. Allow at least 30 seconds to 1 minute between starting attempts.
Troubleshooting
Refer to the table below for common issues and solutions:
| Connection Status | Indicator | Situations and Solutions |
|---|---|---|
| Smart clamps connected to the jump starter only | Flashing green | Ready to work |
| Solid orange with long buzzes | Clamps malfunction (usually occurs on first use). Remove the clamps and contact official@ibuture.com for a replacement. | |
| Solid orange with slow buzzes | Low voltage protection. Recharge the jump starter. | |
| Smart clamps connected to both the jump starter and the car battery | Flashing green | The clamps did not detect connection to the car battery. Ensure the connection is correct, and try turning on the car's turn signal or headlights. |
| Solid orange | Timeout Protection. Remove the clamps and reconnect to the jump starter. | |
| Solid orange with rapid buzzes | Reverse polarity protection. Ensure the correct connection. | |
| Flashing orange with slow buzzes | Overheat protection. Remove the clamps to let it cool. | |
| Others | Please contact official@ibuture.com with details. |
Important Safety Warnings
ATTENTION: Please read the following safety warnings before using the product and take safety protection measures to avoid malfunctions caused by accidental operation.
Personal Safety
- Store in a cool and well-ventilated place out of reach of children and pets.
- Do not place the product in high temperature environments for a long time. The operation temperature of this product is -4°F~140°F (-20°C~60°C). The storage temperature should not exceed 122°F (50°C).
Electrical Safety
- Only start vehicles with the smart jumper cable supplied by the manufacturer.
- Do not use the product if the clamp or cable is damaged.
- Do not connect the red and black clamps together when the product is outputting power.
- Do not connect the red and black clamps to the same piece of metal.
- Do not disassemble or modify this product.
- Do not use detergent to clean this product.
- Do not abuse this product and avoid heavy dropping or repeatedly hitting it.
- Do not operate the product in explosive environments such as those containing flammable liquids, gases, or dusts.
- Do not immerse the product in water.
Battery Safety
- Do not litter the product; it should be safely recycled.
- Do not incinerate the product or expose it to high temperatures, as they may explode.
- Only use replacement parts or accessories provided or recommended by the manufacturer.
Regulatory Information
Federal Communication Commission Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity
We (EU based importer is responsible for this declaration)
SUCCESS COURIER SL
(Company name)
CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
(Company address)
declare under our sole responsibility that the product:
Trade name: Buture
Equipment: Jump Starter
Model No.: Beta08
to which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to LVD Directive(2014/35/EU) & EMC Directive(2014/30/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the following standards were applied:
- EN IEC 62368-1:2020+A11:2020
- EN 55032:2015 AMD.1:2020+A11:2020
- EN 55035:2017AMD.1:2020
- EN IEC 61000-3-2:2019/A1:2021
- EN 61000-3-3:2013AMD.1:2019+ AMD.2:2021
- IEC62321-3-1:2013
- IEC62321-4:2013
- IEC62321-5:2013
- IEC62321-6:2015
- IEC62321-7-1:2015
- IEC62321-7-2:2017
- IEC62321-8:2017
Full Name: George.wang Position: Approbation Manager
Signature: George.wang
Place/Date: Shenzhen, China/Nov.25-2021
