LEKATO R COMP

Contents

LEKATO R COMP Compressor Pedal

User Manual

Introduction

The LEKATO R COMP Compressor Pedal is a portable, mini vintage-style compressor designed for electric guitar and bass. This pedal is engineered to boost your sound and provide enhanced control over your instrument's dynamics. It processes the sound to make the loudness of each frequency more even, adding subtle details and sustain to your tone.

Featuring a compact design and true bypass functionality, the R COMP pedal is a valuable addition to any pedalboard, allowing for precise sound shaping without coloring your tone when disengaged.

Setup

Package Contents

  • 1 x LEKATO R COMP Compressor Guitar Pedal
  • 1 x User Manual
LEKATO R COMP pedal and included user manual and velcro strips
Figure 1: Package contents including the R COMP pedal, user manual, and velcro strips.

Power Connection

The LEKATO R COMP pedal requires a 9V DC power supply with a center-negative polarity. The power adapter is not included with the pedal. Ensure you use a compatible power supply to prevent damage.

Diagram showing DC 9V center negative power adapter requirement
Figure 2: Power adapter specifications (DC 9V, center negative).

Connecting the Pedal

Connect your instrument (guitar or bass) to the "IN" jack on the right side of the pedal. Connect the "OUT" jack on the left side of the pedal to your amplifier or the next effect pedal in your signal chain. For optimal sound experience, it is recommended to connect the compressor pedal before any distortion or overdrive effects in your signal chain.

LEKATO R COMP pedal with input and output cables connected
Figure 3: Proper connection of input and output cables to the pedal.

Operating Instructions

Controls Overview

The R COMP pedal features three control knobs and a footswitch for operation:

  • SUSTAIN Knob: Adjusts the compression ratio, influencing the duration of the note's decay.
  • ATTACK Knob: Sets the attack time of the compression effect, determining how quickly the compressor responds to your signal.
  • LEVEL Knob: Controls the overall output volume of the compressed signal.
Diagram illustrating the functions of Sustain, Attack, and Level knobs on the R COMP pedal
Figure 4: Explanation of the Sustain, Attack, and Level knob functions.

Engaging the Effect (True Bypass)

The pedal features a true bypass footswitch. Press the footswitch to toggle the effect on or off. When the effect is off, the true bypass circuit ensures that your instrument's original tone is retained without any signal degradation, allowing for a clean switch between affected and unaffected sounds.

Illustration of True Bypass functionality, showing signal path when effect is on and off
Figure 5: True Bypass ensures original tone when the effect is disengaged.

Maintenance

To ensure the longevity and optimal performance of your LEKATO R COMP pedal, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents, as they may damage the finish.
  • Storage: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Connections: Periodically check all cable connections for tightness and wear. Loose connections can lead to signal loss or noise.
  • Power: Always disconnect the power supply when the pedal is not in use for extended periods.

Troubleshooting

If you encounter issues with your LEKATO R COMP pedal, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
No sound when pedal is engaged.Incorrect power supply; loose cables; pedal not receiving signal.Ensure 9V DC center-negative power supply is connected. Check all input/output cables are securely plugged in. Verify instrument and amplifier are working correctly.
Weak or distorted sound.Incorrect knob settings; faulty cables.Adjust LEVEL, SUSTAIN, and ATTACK knobs. Try different cables.
Pedal does not turn on (LED off).No power; faulty power supply.Check power connection. Test with a different compatible 9V DC power supply.

Specifications

FeatureDetail
BrandLEKATO
ModelR COMP
Effect TypeVintage Compressor
Control TypePedal
Power Requirement9V DC (Center Negative)
Bypass ModeTrue Bypass
Dimensions (L x W x H)95mm (3.7in) x 38mm (1.4in) x 40mm (1.6in)
WeightApprox. 300g
Dimensions of the LEKATO R COMP pedal: 95mm length, 38mm width, 40mm height
Figure 6: Physical dimensions of the R COMP pedal.

Warranty and Support

LEKATO products are designed for reliability and performance. For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.