Advantech IPC-610-H

Contents

Advantech IPC-610-H 4U Rackmount Industrial Computer Chassis User Manual

Model: IPC-610-H | Brand: Advantech

1. Introduction

The Advantech IPC-610-H is an economical 4U rackmount industrial computer chassis designed for server and industrial PC applications. It features a robust construction, efficient cooling, and visual alarm notifications to ensure reliable operation in demanding environments. This manual provides essential information for the proper installation, operation, and maintenance of your IPC-610-H chassis.

Front view of the Advantech IPC-610-H chassis
Figure 1: Front view of the Advantech IPC-610-H Industrial Computer Chassis.

2. Safety Information

Please read and follow these safety instructions carefully to prevent injury and damage to the equipment.

  • Always disconnect power before performing any installation, maintenance, or troubleshooting.
  • Ensure proper grounding to prevent electrical shock.
  • Only qualified personnel should perform installation and servicing.
  • Avoid blocking ventilation openings to prevent overheating.
  • Operate the chassis within the specified environmental conditions (temperature, humidity).
  • Do not expose the chassis to moisture or extreme temperatures.

3. Package Contents

Verify that all items are present and in good condition upon unpacking. If any items are missing or damaged, contact your vendor immediately.

  • Advantech IPC-610-H Chassis
  • Accessory kit (screws, cables, etc.)
  • User Manual (this document)

4. Setup and Installation

4.1. Chassis Overview

Diagram of IPC-610-H front panel features
Figure 2: Front Panel Features and Drive Bays.

The front panel includes:

  • System reset button
  • Power switch
  • USB & PS/2 ports
  • Three 5.25" drive bays (devices not included)
  • One 3.5" drive bay
  • Two easy-to-maintain cooling fans
  • Lockable front door
  • LED indicators for power, HDD activity, and power voltage status

4.2. Rack Mounting

The IPC-610-H is a 4U rackmount chassis. Install it into a standard 19-inch server rack using appropriate rackmount rails and screws (not always included, check accessory kit).

4.3. Drive Installation

  1. Open the lockable front door.
  2. For 5.25" drives: Slide the drive into an available 5.25" bay and secure it with screws. The chassis supports up to three 5.25" drives.
  3. For 3.5" drives: Slide the drive into the 3.5" bay and secure it. The chassis supports one 3.5" drive.
  4. The chassis also supports two 3.5" or 2.5" hot-swap external drives (specific trays/caddies may be required).

4.4. Motherboard and Add-on Card Installation

  1. Remove the chassis cover.
  2. Install your compatible industrial motherboard according to its specific instructions.
  3. Install up to 15 add-on cards into the available expansion slots, securing them with the hold-down clamp and screws.
Internal view of the IPC-610-H chassis
Figure 3: Internal layout showing motherboard area and expansion slots.

4.5. Power Supply Installation

The chassis supports an 80 plus single power supply or a redundant power supply up to 500W. Install the power supply into the designated bay at the rear of the chassis and secure it. Connect the necessary power cables to the motherboard, drives, and other components.

Rear view of the IPC-610-H chassis
Figure 4: Rear view showing power supply bay and expansion slots.

5. Operating Instructions

5.1. Powering On/Off

  • To power on: Ensure all connections are secure, then press the power switch on the front panel.
  • To power off: Press and hold the power switch until the system shuts down, or use the operating system's shutdown function.

5.2. LED Indicators

The front panel LEDs provide visual status updates:

  • Power LED: Indicates the system's power status (e.g., on/off).
  • HDD Activity LED: Flashes to indicate hard disk drive activity.
  • Power Voltage Status LED: Provides information on the system's power voltage. Refer to your motherboard manual for specific interpretations of voltage status.

5.3. Front Panel Access

The lockable front door protects the drive bays and front I/O ports. Use the provided key to lock or unlock the door to prevent unauthorized access or accidental disconnections.

6. Maintenance

6.1. Cleaning Air Filters

The IPC-610-H features dual front-accessible filtered cooling fans. Regular cleaning of these filters is crucial for maintaining optimal airflow and preventing dust buildup inside the chassis.

  1. Power off the system and disconnect the power cable.
  2. Open the lockable front door.
  3. Carefully remove the air filters from the front fan assembly.
  4. Clean the filters using compressed air or by washing them with mild soap and water. Ensure they are completely dry before reinstallation.
  5. Reinstall the clean filters and close the front door.
Image showing access to front-accessible fans for maintenance
Figure 5: Accessing the easy-to-maintain front fans.

6.2. General Cleaning

Wipe the exterior of the chassis with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. For internal cleaning, use compressed air to remove dust from components, ensuring the system is powered off and unplugged.

7. Troubleshooting

If you encounter issues with your IPC-610-H chassis, refer to the following common problems and solutions:

  • No Power: Check all power connections, including the power supply unit and the main power cable. Ensure the power switch is in the 'on' position. Verify the power outlet is functional.
  • System Overheating: Ensure the chassis is in a well-ventilated area. Clean the air filters and check that the cooling fans are operating correctly.
  • Drive Not Detected: Verify that the data and power cables to the drive are securely connected. Check the drive's status in the system BIOS/UEFI.
  • Unusual Noises: Inspect fans for obstructions or damage. If the noise persists, it may indicate a failing component.
  • LED Indicators Not Functioning: Check the connections from the front panel to the motherboard.

For more complex issues, consult the documentation for your installed motherboard and components, or contact Advantech support.

8. Specifications

FeatureDescription
ModelIPC-610-H
Form Factor4U Rackmount
5.25" External Bays3
3.5" External Bays1
Hot Swap External Bays2 (3.5" or 2.5")
Add-on Card SupportUp to 15
Fans1 (12 cm / 82 CFM) + 1 (6 cm / 28 CFM)
Air FilterYes
Front I/O2 x USB 2.0, 1 x PS/2
LED IndicatorsPower, HDD Activity, Power Voltage Status
Operating Temperature0 ~ 40° C (32 ~ 104° F)
Non-Operational Temperature-20 ~ 60° C (-4 ~ 140° F)
Operating Vibration1 Grms
Non-Operating Vibration2 G
Dimensions (W x H x D)482 x 177 x 479 mm (19" x 7" x 18.9")
Weight (Net)17.6 kg (38.7 lb)
Installation MethodAssembly
OriginMainland China (Beijing)
Detailed dimension diagram of the IPC-610-H chassis
Figure 6: Detailed Dimensions (Unit: mm [inch]).

9. User Tips

  • Authenticity Check: Always ensure you purchase genuine Advantech products to guarantee quality and warranty support.
  • Regular Cleaning: Periodically clean the front air filters to maintain optimal cooling performance and extend the lifespan of internal components.
  • Secure Access: Utilize the lockable front door to protect your installed drives and front I/O ports from unauthorized access or accidental interference.

10. Warranty and Support

This Advantech product is covered by the standard Advantech warranty policy. For specific warranty terms and conditions, please refer to the official Advantech website or contact your point of purchase.

For technical support, troubleshooting assistance, or any inquiries regarding your IPC-610-H chassis, please contact your vendor or Advantech customer service. You can expect a response and solution within 24 hours for support requests.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.