1. Introduction
This manual provides detailed instructions for setting up, operating, and maintaining your KERUI 4MP HD H.265 PTZ WIFI IP Camera 8CH Wireless 10.1-inch LCD Monitor NVR Kit. This system is designed for comprehensive home security video surveillance, offering high-definition imaging, flexible connectivity, and smart features.
Image: Overview of the KERUI 4MP HD H.265 PTZ WIFI IP Camera 8CH Wireless 10.1-inch LCD Monitor NVR Kit, showing the NVR monitor and multiple PTZ cameras.
2. Product Features
- High-Resolution Imaging: 4.0MP lens for clear and fine images.
- Advanced Video Compression: H.265AI/H.265+ (compatible with H.265/H.264) for super low bit rate and high-definition quality.
- Integrated Monitor: Built-in 10.1-inch LCD monitor for direct viewing.
- Flexible Connectivity: Supports both wired and wireless (WiFi) connections.
- Smart Detection: Human detection support with customizable intelligent functions.
- Weatherproof Design: IP66 waterproof rating for outdoor and indoor use, resistant to dust, cold, and heat.
- Night Vision: Smart IR-Cut night vision for clear video day and night, including IR Night Vision and Full Color Night Vision options.
- Multiple Storage Options: Supports 2.5-inch hard drive (HDD), Micro SD card (max 128GB), and Cloud storage.
- Multi-Language Support: NVR supports 28 languages including English, Russian, Italian, Portuguese, Spanish, French, German.
3. Setup Instructions
Follow these steps to set up your KERUI NVR Kit.
3.1 NVR Initial Setup
- Power Connection: Plug in the power supply to the NVR monitor.
- USB Mouse Connection: Connect the USB mouse to one of the USB ports on the NVR. This is essential for navigating the NVR interface.
- System Boot: The NVR will power on and display the "WIFI NVR" logo, followed by a startup wizard. You can choose to proceed with the wizard or cancel to access the main interface.
Video: Demonstrates initial power-up, USB mouse connection, and NVR boot sequence.
3.2 Connecting WiFi Cameras
- Access Channel Set: Right-click on the NVR screen to open the main menu, then select "Channel Set".
- Initiate QuickPair: In the IP channel settings, click the "QuickPair" button. The NVR will begin configuring.
- Camera Reboot: Reboot each WiFi camera to complete the operation code pairing. This process may take approximately three minutes per camera.
Image: NVR interface displaying the "QuickPair" configuration process for connecting WiFi cameras.
3.3 Network Connection
For remote viewing and advanced features, connect the NVR to your network.
- Wired Connection: Insert a network cable into the NVR's network port.
- Wireless Connection: The NVR supports WiFi connectivity for cameras. Ensure your NVR is within range of your wireless router.
Image: Diagram illustrating easy DIY installation, showing WiFi cameras wirelessly connected to the NVR, and the NVR connected to a router via an Ethernet cable.
3.4 Mobile App Connection (XMEye Pro)
- Download App: Scan the QR code displayed on the NVR screen or search for "XMEye Pro" in your mobile app store.
- Add Device: Open the XMEye Pro app, select "Add Device", and scan the QR code on the NVR screen to add your device.
- View Live Feed: Once connected, you can view live feeds from your cameras, receive alarm pushes, and manage settings remotely.
Image: Screenshots of the XMEye Pro mobile application, showing real-time monitoring of multiple camera feeds and a list of alarm push notifications for human detection.
4. Operating Instructions
4.1 NVR Interface Navigation
Use the connected USB mouse to navigate the NVR's graphical user interface. Right-click to access the main menu, which includes options for Channel Set, Record Mode, Playback, Face Detection, IPC parameters, Color Setting, Split Menu, PTZ Control, Output Adjust, NetDetect, and Logout.
Image: NVR screen showing the language selection menu, indicating support for multiple languages.
4.2 Motion Detection & Alerts
The system supports human detection, which can trigger accurate alerts. Configure alert types such as audio alarms, app push notifications, and email alerts through the NVR settings or the mobile app.
Image: Illustration of motion detection triggering an alert on a smartphone, with options for audio alarm, app push, and email. Also shows HDMI connection for viewing.
4.3 Night Vision Modes
The cameras are equipped with Smart IR-Cut technology, providing clear surveillance in various lighting conditions:
- Day Vision: Standard color video during daylight.
- IR Night Vision: Black and white video in low-light or no-light conditions using infrared.
- Full Color Night Vision: Provides color video even in dark environments, utilizing advanced light sensors.
Image: Visual comparison of Day Vision, IR Night Vision, and Full Color Night Vision capabilities of the camera.
5. Maintenance
5.1 Hard Drive Installation
To enable local video recording, you may need to install a 2.5-inch hard drive (HDD) into the NVR. It is recommended to use a 2.5-inch HDD for sufficient memory and easy readability.
- Unscrew Back Cover: Carefully unscrew the back cover screws of the NVR.
- Insert HDD: Gently insert the 2.5-inch hard drive into the designated slot.
- Secure HDD: Tighten the screws to secure the hard drive in place.
- Replace Cover: Put the back cover back on and tighten its screws.
Image: Diagram illustrating the three available storage methods: Cloud storage, SD card (max 128GB), and 2.5-inch HDD.
The video also demonstrates the hard drive installation process.
5.2 General Care
The cameras are IP66 waterproof and dustproof, designed for outdoor and indoor use in various weather conditions, including sunny, rainy, snowy, and windy. They can withstand temperatures from -10°C/14°F to 60°C/140°F. Regularly check for any obstructions to the camera's view and keep the lenses clean for optimal performance.
Image: Close-up of the camera highlighting its IP66 waterproof and dustproof features, with icons representing various weather conditions it can endure.
6. Troubleshooting
- No Video Display: Ensure all power connections are secure and the NVR is powered on. Check camera connections and ensure they are properly paired.
- Poor Video Quality: Verify camera lens cleanliness. Check network signal strength for wireless cameras. Ensure sufficient bandwidth for streaming.
- No Remote Access: Confirm the NVR is connected to the internet via a network cable or WiFi. Check app settings and ensure the device is added correctly.
- Recording Issues: Ensure a hard drive or SD card is installed and properly formatted. Check available storage space.
- Motion Detection Not Working: Review motion detection settings in the NVR or app to ensure it's enabled and configured correctly.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | KERUI |
| Model Number | N1008L-WF-KIT |
| Resolution | 4MP |
| Video Input | 8 Channel 4MP / 4 Channel 6MP |
| Video Compression Format | H.265AI/H.265+ |
| Monitor Size | 10.1 inch |
| Remote View Phone APP | XMEye Pro (recommended) |
| Hard Drive Type | 7mm 2.5 inch HDD, Max 4TB |
| Feature 1 | Human Detection |
| Feature 2 | Support multi languages |
| Type 1 | 8CH NVR Camera System |
| Type 2 | 10.1inch LCD Monitor NVR Kit |
| Type 3 | Screen and NVR host 2in1 |
| TV System | NTSC |
| Origin | Mainland China |
| Certification | CE |
Image: Diagram showing the dimensions of the 10.1-inch NVR monitor and labels for its ports, including Antenna, 2.5-inch hard drive slot, Power switch, TF Card port, USB port, Network port, HDMI port, and Power port.
8. Warranty and Support
For any technical assistance, warranty claims, or further inquiries, please contact the KERUI Official Store directly. Refer to your purchase documentation for specific warranty terms and contact information.