1. Product Overview
The Xiaomi Automatic Foam Soap Dispenser is a touchless, smart device designed for hygienic hand washing. It features infrared sensing for automatic foam dispensing, a smart display for battery and gear levels, and a convenient Type-C charging port. Its 380ml capacity and IPX5 waterproof rating make it suitable for various environments.
2. Setup Instructions
2.1 Unpacking and Placement
Carefully remove the soap dispenser from its packaging. The dispenser can be placed on a desktop or hung on a wall using its punch-free installation method.
2.2 Filling the Liquid Tank
The dispenser has a 380ml capacity and a visual water tank to monitor liquid levels.
- Twist the top section of the dispenser counter-clockwise to open the liquid tank.
- For Foam Soap: Pour foam soap directly into the tank.
- For Ordinary Liquid Soap: Dilute ordinary liquid soap with water at a ratio of 1:3 to 1:5. Stir gently to mix.
- Twist the top section clockwise to securely close the tank.
2.3 Charging
The dispenser is equipped with a Type-C charging port. A clear battery level indicator is visible on the smart display.
- Connect the provided Type-C USB cable to the charging port on the dispenser.
- Connect the other end of the cable to a suitable USB power source.
- The smart display will show the charging status (25%, 50%, 75%, 100%).
3. Operating Instructions
3.1 Power On/Off
- To Turn On: Press and hold the power button on the top of the device for 2 seconds.
- To Shut Down: Press and hold the power button for 3 seconds.
3.2 Automatic Dispensing
The dispenser uses infrared sensing for touchless operation.
- Place your hand within the sensing area (approximately 30° inclined angle design bubble outlet).
- The dispenser will automatically detect your hand and rapidly dispense foam.
- There is no need to press any buttons during dispensing.
3.3 Adjusting Foam Output (Gears)
The dispenser offers 4 adjustable gear levels to control the amount of foam dispensed.
- Briefly press the power button (after turning on) to cycle through the 4 gear levels.
- The smart display will indicate the currently selected gear (1, 2, 3, or 4).
- Each gear corresponds to a different dispensing duration:
- Level 1: 0.3 seconds
- Level 2: 0.8 seconds
- Level 3: 1.5 seconds
- Level 4: 2.0 seconds
4. Maintenance
4.1 Cleaning the Dispenser
The dispenser has an IPX5 waterproof rating, making it resistant to water splashes.
- Wipe the exterior of the dispenser with a soft, damp cloth.
- Do not submerge the entire unit in water.
- Clean the nozzle regularly to prevent clogging.
4.2 Refilling Liquid
Monitor the visual water tank and refill the liquid soap as needed to ensure continuous operation.
5. Troubleshooting
- No foam dispensed:
- Check if the dispenser is powered on.
- Ensure there is enough liquid soap in the tank.
- Verify that the liquid soap is properly diluted if using ordinary liquid soap.
- Clean the nozzle for any blockages.
- Weak foam output:
- Check battery level and recharge if low.
- Ensure proper dilution ratio for ordinary liquid soap.
- Dispenser not turning on:
- Ensure the battery is charged.
- Press and hold the power button for the specified duration (2 seconds).
6. Specifications
| Feature | Specification |
|---|---|
| Brand | XIAOMI |
| Material | ABS, PC |
| Dimensions (L x W x H) | 112mm x 75mm x 200mm (approx. 21.9cm H, 7cm W, 9.8cm D) |
| Capacity | 380ml |
| Color Options | White, Black |
| Charging Type | Type-C USB |
| Waterproof Rating | IPX5 |
| Sensing Mechanism | Infrared Sensor, Human Body Induction |
| Foam Output Gears | 4 levels (0.3s, 0.8s, 1.5s, 2.0s) |
| Installation | Desktop or Punch-free Wall Mount |
| Recommended Use | Children, adults for hand washing, hair washing, bathing, dish washing |
| Environment | Sink, bathroom, hotel, public toilet, hospital, school, etc. |
7. User Tips
- For optimal foam consistency with ordinary liquid soap, ensure thorough mixing after dilution.
- Regularly check the battery level on the smart display to avoid unexpected power loss.
- Experiment with the 4 gear levels to find your preferred foam output for different uses.
8. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
