Mi Automatic Foaming Soap Dispenser User Manual

Important Safety Information

Read this manual carefully before use, and retain it for future reference.

For European countries or regions: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

For non European countries or regions: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Battery Safety:

• Non-rechargeable batteries are not to be recharged.
• Different types of batteries or new and used batteries are not to be mixed.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the appliance and safely disposed of.
• If the appliance is to be stored unused for a long period, the batteries should be removed.
• The supply terminals are not to be short-circuited.

Product Overview

The Mi Automatic Foaming Soap Dispenser features:

• On/Off Button/Indicator Light: Located at the top.
• Foam Dispenser: The nozzle from which foam is dispensed.
• Sensor Area: The area that detects hand presence to dispense foam.
• Soap Dispenser: The main body holding the liquid soap.

The top of the dispenser houses the battery compartment, accessible via a cover. The compartment is divided into segments (A and B) and has slots for battery insertion, clearly marked with positive (+) and negative (-) terminals.

Soap Dispenser Features

• Contactless & Hygienic: Wave icon [wave-symbol].
• Creamy Foam: Foam icon [foam-symbol].
• IPX4 Waterproof: Shield icon [shield-symbol].
• Elegant & Durable: Box icon [box-symbol].

The product is CE certified. Shanghai Xiaowei Cosmetics Co., Ltd. declares compliance with applicable Directives and European Norms. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html

This product is marked with the WEEE symbol ♻️, indicating it is waste electrical and electronic equipment. It should not be mixed with unsorted household waste. Proper disposal protects human health and the environment. Hand over waste equipment to a designated collection point appointed by the government or local authorities.

Installation

1. Step 1: Loosen the battery cover counterclockwise. ↩️
2. Step 2: Correctly align the batteries with the positive (+) and negative (-) symbols when inserting them. ?
3. Step 3: Align the unlocked symbol on the battery cover with the triangular symbol on the side of the dispenser. ↔️
4. Step 4: Turn the battery cover clockwise until the lock symbol aligns with the triangular symbol. ➡️
5. Step 5: Unscrew the hand soap cover counterclockwise, and remove the silicon plug. ?
6. Step 6: Align the hand soap with the bottom of the dispenser and gently turn it counterclockwise until it is secure. ✅

Instructions

1. Step 1: Tap the On/Off button to turn on the Mi Automatic Soap Dispenser. ?
2. Step 2: It is recommended to first rinse your hands with water to moisten them. ?
3. Step 3: Move your hands into the sensor area to dispense foam. ?
4. Step 4: It is recommended to thoroughly rub your hands. ?
5. Step 5: Dry your hands after washing them with water. ?️

Note: When the soap dispenser is not being used, it will automatically go into standby mode. It is not necessary to manually turn it off.

Indicator Light Status:

*When the dispenser is on, tap the On/Off button to turn it off.

Maintenance

• For cleaning, it is recommended to gently wipe the surface of the device with a wet towel when it is turned off.
• If the product will not be used for a long time, please take out the batteries to avoid them from getting damp or starting to leak.

Precautions

• Do not immerse the product in water nor rinse it directly with water to avoid short circuits.
• Do not tilt the bottle when installing or replacing the hand soap. It is normal if a small amount of liquid overflows; it can still be used normally after wiping it clean.
• Do not use non-foaming hand soap in order to avoid the device from malfunctioning.
• Store this product in a cool place away from direct sunlight or heat sources.
• Only use the dispenser when the batteries and the compartment are thoroughly dry. In case the dispenser encounters any water spray, inversion, or tilt, immediately check the batteries and the compartment.
• Please recycle the used batteries. ♻️

Troubleshooting

Specifications

* AA LR6 × 4 are not included and sold separately.

Warranty Notice

This warranty gives you specific rights, and you may have other rights conveyed by laws of your country, province or state. Consumer law may impose a minimum warranty period. Xiaomi does not exclude, limit or suspend other rights you may have.

1. Limited Product Warranty

Xiaomi warrants that the Products are free from defects in materials and workmanship under normal use and use in accordance with the Product user manual, during the Warranty Period. Duration and conditions related to legal warranties are provided by respective local laws. For more information about consumer warranty benefits, refer to Xiaomi's official website: https://www.mi.com/en/service/warranty/.

Xiaomi warrants to the original purchaser that its Product will be free from defects in materials and workmanship under normal use. Xiaomi does not guarantee uninterrupted or error-free operation and is not liable for damages arising from non-compliance with instructions.

2. Remedies

If a hardware defect is found and a valid claim is received within the Warranty Period, Xiaomi will either (1) repair the product at no charge, (2) replace the product, or (3) refund the Product, excluding potential shipping costs.

3. How to Obtain Warranty Service

To obtain warranty service, deliver the Product in original or similar packaging to the address specified by Xiaomi. Xiaomi may require proof of purchase and/or compliance with registration requirements.

4. Exclusions and Limitations

This Limited Warranty applies only to Products manufactured by or for Xiaomi. It does not apply to damage due to:

• Acts of nature (e.g., lightning, flood, fire, earthquake).
• Negligence.
• Commercial use.
• Alterations or modifications.
• Use with non-Xiaomi products.
• Accident, abuse, or misuse.
• Operating outside permitted uses or with improper voltage/power supply.
• Service performed by non-representatives.

It is your responsibility to back up data. Xiaomi is not responsible for data loss during service.

No Xiaomi representative is authorized to modify this warranty. After-sales services are limited to the country/region of original purchase. Products not duly imported, manufactured, or acquired from Xiaomi or an official seller are not covered. Contact the retailer for warranty on such products.

5. Implied Warranties

Implied warranties (including merchantability and fitness for a particular purpose) have a limited duration up to the maximum duration of this limited warranty, as permitted by law.

6. Damage Limitation

Xiaomi shall not be liable for indirect, special, or consequential damages (including loss of profits, revenue, or data) arising from breach of warranty or any other legal theory, even if informed of the possibility of such damages.

7. Xiaomi Contacts

For customers, visit: https://www.mi.com/en/service/warranty/.

Contact person for after-sale service may be any person in Xiaomi's authorized service network, distributors, or the final vendor. Contact the relevant person if in doubt.

Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz