Introduction
The XGMI RS 10 Plus is a high-performance 4K Triple Laser Projector designed for an immersive home theater experience. Featuring 2700 CVIA Lumens, PTZ (Pan-Tilt-Zoom) capabilities, HDR 10, and 3D support, this Android-based projector delivers stunning visuals and powerful audio. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your projector.
Setup
Unpacking and Placement
Carefully remove the projector and all accessories from the packaging. Place the projector on a stable, flat surface. The RS 10 Plus features PTZ capabilities, allowing for flexible placement. It can pitch up to 135° and rotate horizontally 360°.
Power Connection
Connect the provided inbox adaptor to the projector's power input and then to a power outlet.
Initial Setup and Language
Important Note: This is the Chinese version of the machine and currently only supports Chinese. If you require a different language, you will need to use an external TV box or TV stick.
Upon first power-on, follow the on-screen instructions. The projector features automatic keystone correction, real-time image correction, intelligent obstacle avoidance, and wall color adaptation to optimize your viewing experience.
Remote Control
The projector includes a remote controller. Due to shipping restrictions, the battery may have been removed. Please insert the required batteries (not included) to operate the remote.
Operating Instructions
System and Connectivity
The XGMI RS 10 Plus runs on an Android system, providing access to various applications and streaming services. It supports wireless screen projection, allowing you to connect your mobile phone via Wi-Fi.
Available input/output ports include: 3.5mm Earphone Out, HDMI, USB, and EIA-RS-232.
Projection and Image Quality
The projector utilizes a Laser+LED light source with Dual Light 2.0 technology, offering two light source modes:
- Eye-protecting three-color laser: Provides enhanced eye comfort.
- Three-color laser: Delivers vibrant and bright images.
Key image specifications:
- Brightness: 2700 CVIA/lm (measured), 3200 CVIA/lm (promotional), 2200 ISO.
- Optical Resolution: 3840x2160dpi (4K UHD).
- Projected Dimension: 40-120 inches.
- Screen Scale: 16:09.
- Contrast Ratio: 1600:1.
- Color Gamut: 110% BT.2020.
- Color Accuracy: DeltaE < 1 (Rec.709 and DCI-P3 modes).
- HDR Support: HDR 10 / HLG for improved light and dark details.
- Refresh Rate: 120Hz.
- Side Projection: Supports 21:9 giant screen mode.
Audio
The projector features a built-in Harman/Kardon sound system, delivering powerful and clear audio. It includes 2*12W high-power speakers with a 676cc volume and 71.4cm² diaphragm area.
Additional Features
- Chip: MT 9669 powerful chip.
- Bluetooth-compatible: Yes.
Maintenance
Lens Care
To maintain optimal image quality, keep the projector lens clean. Do not use your finger or a general cloth to clean the lens. Use a specialized lens cleaning cloth and solution designed for optical surfaces. Artificial damage to the lens is not covered by warranty.
General Cleaning
Wipe the exterior of the projector with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
Troubleshooting
Image Clarity and Uniformity
It is normal for all projectors to have slight differences in brightness and clarity between the central area and the four corners. The clarity in the middle will typically be higher than at the edges. This difference may be more noticeable when displaying text but is generally negligible when watching movies. If 100% uniform clarity across the entire screen is required, a television or computer monitor may be more suitable than a projector.
Lens Fogging or Lines
If you observe fog on the lens when you first receive the projector, this is normal and is due to the material of the lens and temperature differences. It will typically disappear after a few days of use. Similarly, due to the concentration and reflection of light, you might see faint lines on the lens; these are not scratches and will disappear when the projector is turned off.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | XGIMI |
| Model | RS 10 Plus |
| Category | Projectors, Digital Projector, Home Theater Projector |
| System | ANDROID |
| Light Source | Laser+LED (Dual Light 2.0) |
| Ansi Lumens | 2750 (CVIA/lm) |
| Optical Resolution | 3840x2160dpi (4K UHD) |
| Projected Dimension | 40-120 inches |
| Screen Scale | 16:09 |
| Keystone Correction | Auto Correction |
| Projective Mode | T4 |
| Input/Output | 3.5mm Earphone Out, HDMI, USB, EIA-RS-232 |
| Built-in Speaker | Yes (Harman/Kardon, 2*12W) |
| Bluetooth-compatible | Yes |
| Remote controller included | Yes |
| Portable | Yes |
| Use | HOME |
| Weight | 4.0kg |
| Inbox adaptor | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
User Tips
- Language Solution: If you need to use the projector in a language other than Chinese, consider connecting an external Android TV box or streaming stick to one of the HDMI inputs. This will allow you to navigate and use apps in your preferred language.
- Optimal Viewing: For the best experience, ensure your projection surface is as flat and light-colored as possible. While the projector has wall color adaptation, a neutral surface will yield the most accurate colors.
- Sound Enhancement: Although the built-in Harman/Kardon speakers are powerful, for a truly cinematic audio experience, consider connecting external speakers or a soundbar via the 3.5mm earphone out or Bluetooth.
- Flexible Setup: Utilize the PTZ (Pan-Tilt-Zoom) feature to project from various angles and positions in your room without needing to physically move the projector.
Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
