1. Introduction
Thank you for choosing the Baseus GaN Cube Pro 65W Charger. This compact and powerful charger is designed to provide lightning-fast and efficient charging for multiple devices simultaneously. Utilizing advanced GaN5 technology, it ensures optimal performance, lower operating temperatures, and enhanced safety. This manual will guide you through the features, setup, operation, and maintenance of your new charger.
Figure 1: Baseus GaN Cube Pro 65W Charger and Packaging
2. Safety Information
Your Baseus GaN Cube Pro charger is equipped with multiple built-in protections to ensure the safety of your electronic devices during every charging cycle. These include protection against overvoltage, overload, and excessively low voltage. The charger is also designed to prevent overheating and lightning damage.
- Do not expose the charger to water or excessive moisture.
- Avoid extreme temperatures.
- Do not attempt to disassemble, modify, or repair the charger.
- Keep out of reach of children.
- Use only with compatible devices and cables.
3. Product Overview
The Baseus GaN Cube Pro 65W charger features a compact design with three output ports: two USB-C ports and one USB-A port, allowing for simultaneous charging of up to three devices.
Figure 2: Angled view of the Baseus GaN Cube Pro 65W Charger
Figure 3: Charger Ports (Type-C1, Type-C2, USB-A)
Key Technologies:
- GaN5 Technology: The latest Gallium Nitride (GaN5) technology enhances energy efficiency and allows the charger to operate at a lower temperature, contributing to a longer device lifespan and safer charging.
- BCT Temperature Control: Baseus's BCT (Baseus Cooling Technology) utilizes nanotechnology to accelerate heat dissipation, ensuring stable and efficient operation even under heavy load.
- BPS Power Distribution: The Baseus BPS (Baseus Power Split) system automatically adjusts the output power and voltage to provide optimal charging for each connected device, from laptops to smartphones and tablets.
4. Setup
- Connect to Power: Plug the Baseus GaN Cube Pro 65W charger into a standard AC wall outlet. The charger supports input voltages from 110-240V at 50/60Hz.
- Connect Devices: Use appropriate USB-C or USB-A charging cables to connect your devices (laptops, tablets, smartphones, etc.) to the corresponding ports on the charger.
The charger is designed for plug-and-play operation. No additional software or configuration is required.
5. Operating Instructions
Once connected to a power source and your devices, the charger will automatically detect the connected devices and intelligently adjust the output power for optimal and efficient charging. The BPS Power Distribution system ensures that power is allocated effectively across all active ports.
Figure 4: Simultaneous Charging with 65W Total Output
Figure 5: High-Speed Laptop Charging
Fast Charging Protocols:
The charger supports various fast charging protocols, including Power Delivery 3.0, Quick Charge 3.0, PPS, SCP, FCP, and AFC, ensuring compatibility and rapid charging for a wide range of devices.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Baseus |
| Model | Cube Pro Fast Charger |
| Input | AC 110-240V, 50/60Hz, 1.5A Max |
| USB-C 1 / USB-C 2 Output | 5V/3A (15W), 9V/3A (27W), 12V/3A (36W), 15V/3A (45W), 20V/3.25A (65W) (max) |
| USB-A Output | 5V/3A (15W), 9V/3A (27W), 12V/2.5A (30W), 20V/1.5A (30W) (max) |
| Combined Output (USB-C 1 + USB-C 2) | 45W + 20W (Max) |
| Combined Output (USB-C 1 + USB-A) | 45W + 18W (Max) |
| Combined Output (USB-C 2 + USB-A) | 5V/3A (15W) (max) |
| Combined Output (USB-C 1 + USB-C 2 + USB-A) | 45W + 15W (Max) |
| Max. Output Power | 65W |
| Applied Fast Charge Protocols | Qualcomm Quick Charge, Power Delivery 3.0, Quick Charge 3.0, PPS, SCP, FCP, AFC |
| GaN Technology | Yes (GaN5) |
| Material | PC |
| Dimensions | 77.6 x 54 x 32 mm |
| Weight | 154g |
7. Troubleshooting
- Device not charging:
Ensure the charger is securely plugged into a working wall outlet. Check that the charging cable is properly connected to both the charger and your device. Try a different cable or device to isolate the issue. - Slow charging:
Verify that your device and cable support fast charging protocols (e.g., Power Delivery, Quick Charge). If multiple devices are connected, the total power output is shared, which may reduce individual charging speeds. Ensure the total power draw does not exceed 65W. - Charger feels warm:
It is normal for the charger to become warm during operation, especially during high-power charging, due to its GaN5 technology and BCT temperature control. If the charger becomes excessively hot to the touch, disconnect it immediately and allow it to cool down.
8. Maintenance
- Cleaning: Keep the charger dry and clean. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping or subjecting the charger to strong impacts. Do not attempt to open or modify the charger, as this will void any warranty and could pose a safety risk.
9. User Tips
- For optimal fast charging, always use high-quality cables that support the relevant fast charging protocols (e.g., USB-C to USB-C PD cable for laptops).
- When charging multiple devices, be mindful of the total power distribution. For example, charging a laptop (45W) and a smartphone (15W) simultaneously will utilize most of the charger's capacity.
- The compact and lightweight design makes this charger ideal for travel. Its wide input voltage range (110-240V) means it can be used internationally with the appropriate plug adapter.
10. Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official Baseus website or contact the seller directly through your purchase platform.
