Introduction
This manual provides essential information for the safe and effective assembly, operation, and maintenance of your Vidaxl Green Metal Garden Case. Designed for storing a wide variety of tools, garden furniture, and gardening equipment, this shed offers protection against dirt, dust, wind, and adverse weather conditions. Please read these instructions carefully before beginning assembly or use, and retain them for future reference.
Safety Information
- Always wear appropriate personal protective equipment (PPE), such as gloves and safety glasses, during assembly.
- Ensure the assembly area is clear of obstructions and children or pets.
- Some parts may have sharp edges; handle with care.
- This shed requires assembly by at least two adults for safety and ease.
- Do not climb on the roof of the shed.
- Secure the shed to a solid, level foundation to prevent tipping in strong winds.
- Do not store flammable liquids or hazardous materials inside the shed unless properly secured and ventilated.
Package Contents
Before assembly, verify that all components are present and undamaged. While specific part numbers are not listed here, your package should typically include:
- Galvanized steel wall panels
- Roof panels
- Frame components (beams, supports, corner pieces)
- Double sliding door assembly
- Ventilation grilles (4 units)
- Fasteners (screws, nuts, bolts, washers)
- Assembly manual (separate detailed guide)
If any parts are missing or damaged, please contact your retailer for assistance.
Setup and Assembly
The Vidaxl Garden Case requires assembly. Please refer to the separate, detailed assembly manual included with your product for step-by-step instructions. Below are general guidelines:
- Choose a Location: Select a flat, level, and well-drained area for your shed. Ensure there is enough space around the shed for assembly and future access.
- Prepare the Foundation: A solid, level foundation (e.g., concrete slab, paved area, or treated timber frame) is crucial for the shed's stability and longevity.
- Unpack and Organize: Carefully unpack all components and organize them according to the assembly manual. Identify all parts before starting.
- Assemble the Base Frame: Construct the base frame first, ensuring it is square and level.
- Attach Wall Panels: Secure the galvanized steel wall panels to the base frame and to each other, following the sequence in the manual.
- Install Door Frame and Doors: Assemble and install the double sliding door frame and the doors themselves. Ensure they slide smoothly.
- Install Roof Structure and Panels: Erect the roof support structure and then attach the roof panels.
- Install Vents: Secure the four integrated ventilation grilles.
- Anchor the Shed: Once fully assembled, securely anchor the shed to your chosen foundation using appropriate anchoring hardware (not always included, may need to be purchased separately based on foundation type).
Tools Required (typically): Screwdriver, wrench set, drill, measuring tape, level, work gloves.
Side view of the Vidaxl green metal garden shed with the sliding door partially open.
Operating Instructions
- Access: The shed features double sliding doors for easy entry and exit. Gently slide the doors along their tracks. Avoid forcing them if they encounter resistance.
- Ventilation: The four integrated vents (two on the front, two on the back) ensure optimal air circulation. Keep these vents clear of obstructions to maintain freshness and reduce condensation inside the shed.
- Security: The doors are designed to accommodate a padlock (not included) for securing your stored items.
Front view of the Vidaxl green metal garden shed, showing the double sliding doors and upper vents.
Rear view of the Vidaxl green metal garden shed, highlighting the ventilation openings.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your garden shed.
- Cleaning: Clean the shed periodically with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the powder-coated finish. Rinse thoroughly with clean water.
- Rust Prevention: Although made of galvanized steel with a powder coating, inspect the shed annually for any signs of rust, especially at joints or areas where the coating might be scratched. Touch up any damaged areas with rust-inhibiting paint.
- Fastener Check: Periodically check all screws, nuts, and bolts to ensure they are tight. Re-tighten as necessary, but do not overtighten.
- Door Tracks: Keep the sliding door tracks clean and free of dirt, leaves, or other debris to ensure smooth operation. Lubricate the tracks with a silicone-based spray if doors become stiff.
- Roof Maintenance: Clear any accumulated snow, leaves, or debris from the roof to prevent excessive weight or moisture buildup.
- Ventilation: Ensure the vents remain unobstructed to allow for proper airflow.
Troubleshooting
- Doors are sticking or difficult to slide:
Check the door tracks for any debris (dirt, leaves, small stones) and clean them thoroughly. Ensure the tracks are not bent or damaged. Apply a silicone-based lubricant to the tracks. Verify that the shed is level and square, as misalignment can affect door operation. - Water leaks inside the shed:
Inspect the roof panels and wall joints for proper overlap and sealing. Ensure all fasteners are tight. Check for any damage to the panels. Verify that the shed is installed on a level foundation, as uneven ground can cause gaps. - Shed feels unstable or wobbly:
Confirm that the shed is securely anchored to the ground or foundation. Re-check all frame connections and fasteners for tightness. Ensure the foundation itself is stable and level. - Condensation inside the shed:
Ensure all four vents are clear and unobstructed to allow for adequate airflow. Avoid storing wet items inside the shed. Consider adding a moisture absorber if the problem persists in humid conditions.
Specifications
| Feature | Detail |
|---|---|
| Color | Green |
| Material | Galvanized Steel |
| Overall Dimensions (W x D x H) | 257 x 489 x 181 cm |
| Sliding Door Size (W x H) | 80 x 154 cm |
| Floor Area (W x D) | 245 x 475 cm |
| Ventilation Dimensions (each) | 23 x 10 cm |
| Number of Vents | 4 |
| EAN | 8718475622079 |
User Tips
- For maximum stability and security, consider anchoring your shed to a concrete slab or a robust timber foundation.
- Regularly clear debris from the door tracks to ensure smooth and effortless operation of the sliding doors.
- To maintain optimal ventilation and prevent moisture buildup, ensure that the integrated vents are never blocked by stored items or external obstructions.
- When storing items, distribute weight evenly to prevent stress on the shed's structure.
Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you encounter any issues or require technical assistance, please reach out to the customer support of your point of purchase, providing your model number and EAN for quicker service.
