Aprilboy K888

Contents

Aprilboy K888 4K WIFI Dash Cam User Manual

Model: K888

1. Introduction

This manual provides detailed instructions for the Aprilboy K888 4K WIFI Dash Cam. This dash cam features a high-performance chip, supporting 4K shooting and recording. Please read this manual carefully before use to ensure proper installation and operation. For any issues, refer to the troubleshooting section or contact customer support.

For a visual guide, you can watch the official unboxing and setup video:

Video: Unboxing and Basic Setup Guide

2. Package Contents

Please check the package for the following items:

  • 1 x Aprilboy K888 4K Dash Cam
  • 1 x Original Car Charger
  • 1 x User Manual (PDF version available here)
  • 1 x Installation Tool Kit (includes crowbar, card reader, card pin, 2 static stickers, 5 buckles)

Optional Accessories (may vary based on purchase):

  • 1 x High-speed TF Card (32GB to 512GB, Class 10 or above recommended)
  • 1 x 1080P Night Vision Rear View Camera with 6m Cable
  • 1 x GPS External Module
  • 1 x Hardwired Kit for 24-Hour Parking Monitoring
Aprilboy K888 Dash Cam package contents including dash cam, car charger, user manual, and installation tools.

Image: Aprilboy K888 Dash Cam Package Contents

3. Product Overview

The Aprilboy K888 Dash Cam is designed for comprehensive vehicle surveillance. Key features include:

  • 4K UHD Recording: Captures high-definition video.
  • Dual Lens Support: Front (170° wide-angle) and optional rear (140° wide-angle) cameras.
  • Built-in WiFi: For easy connection to the 'GoLook' app for viewing and managing recordings.
  • G-Sensor: Automatically detects collisions and locks video files.
  • Loop Recording: Overwrites oldest unlocked files when the memory card is full.
  • Parking Monitor: Provides surveillance when the vehicle is parked (requires optional hardwire kit).
  • Night Vision: Enhanced clarity in low-light conditions.
  • Type-C Port: Modern and versatile connectivity.
  • Advanced Processor: Novatek 4K Fast Processor with Sony IMX335 Imaging Sensor.
Icons representing features like WiFi, Night Vision, Type-C, G-sensor, Advanced Processor, 170 degree Wide Angle, Loop Recording, and Parking Monitor.

Image: Key Features of the Aprilboy K888 Dash Cam

3.1 Device Layout

Diagram showing the dimensions and labeled parts of the Aprilboy K888 Dash Cam: 1. Type-C, 2. TF Card, 3. AV-IN, 4. Bracket, 5. HD lens, 6. Screen, 7. Function Keys, 8. Photo Button, 9. Speakers.

Image: Product Size and Component Diagram

  • 1. Type-C Port: For power input and GPS module connection.
  • 2. TF Card Slot: For inserting the Micro SD memory card.
  • 3. AV-IN Port: For connecting the rear camera.
  • 4. Bracket: For mounting the dash cam to the windshield.
  • 5. HD Lens: Front camera lens.
  • 6. Screen: 1.47" IPS display.
  • 7. Function Keys: For navigating menus and settings.
  • 8. Photo Button: For taking still images.
  • 9. Speakers: For audio output.
Rear view of the dash cam showing the screen and two buttons labeled 'Toggle Front/Inside Screen, WiFi' and 'Take a photo'.

Image: Dash Cam Screen and Buttons

4. Setup and Installation

4.1 Inserting the Memory Card

  1. Before using, format the memory card within the camera.
  2. Use a Class 10 or higher high-speed Micro TF card (32GB to 512GB).
  3. Do not insert or remove the memory card while the recorder is powered on to prevent damage.

4.2 Mounting the Dash Cam

  1. Choose a suitable mounting position on your windshield, ensuring it does not obstruct your view.
  2. Clean the windshield thoroughly with a dry cloth.
  3. Apply the static sticker to the cleaned area.
  4. Install the dash cam onto the static sticker and adjust the viewing angle.
Diagram showing the recommended cable routing for easy installation of the dash cam in a car, typically along the windshield and dashboard edges.

Image: Easy Installation Cable Routing

4.3 Connecting to Car Power

  1. Use only the original car charger provided.
  2. Connect the car charger to the dash cam's Type-C port.
  3. Plug the car charger into your vehicle's cigarette lighter socket.
  4. The camera will automatically turn on and begin charging when you start the car, and turn off a few seconds after the engine is turned off.

4.4 Optional: Connecting the Rear Camera

  1. Before installation, ensure the rear camera is working properly.
  2. Connect the rear camera cable to the AV-IN port on the dash cam.
  3. Install the rear camera in a suitable position, typically on the car's rear windshield. It supports a 360-degree rotating angle for flexible positioning.
  4. Note: The inside lens (rear camera) is not waterproof.
Image showing the rear camera mounted on the car's rear windshield with a 360-degree rotation capability.

Image: Rear Camera Mounting Example

4.5 Optional: Connecting the GPS Module

  1. Insert the GPS module into the Type-C port of the camera.
  2. Connect the car charger to the Type-C port of the GPS module.
  3. Fix or hide the GPS module to prevent blocking the driver's view or the camera's field of view.
Diagram illustrating the connection method for the dash cam, GPS module, and car charger using Type-C ports.

Image: GPS Module and Power Connection Method

4.6 Optional: Hardwire Kit for 24-Hour Parking Monitoring

If you require 24-hour parking monitoring, you need to purchase and install the hardwire kit separately. This kit connects directly to your car's fuse box.

Wiring diagram for the hardwire kit showing connections to USB-C, fuse box (ACC, BAT+), ignition cord (red), battery cord (yellow), earth cord (black), main fuse, and car battery.

Image: Hardwire Kit Wiring Diagram

Important Note for Hardwire Kit:

  • Before connecting the hardwire kit, ensure the engine is off.
  • Disconnect the negative terminal of the car battery to prevent short circuit accidents.
  • The DVR is only suitable for vehicle connection with a 12V power supply. If using a 24V power supply, a proven 24V to 12V transformer (BL) must be added to avoid burning the motherboard.

5. Operating Instructions

5.1 Button Functions

  • Menu Button-1 (Top button on the side with screen): Short tap to switch between front camera view, inside camera view, and WiFi information display.
  • Menu Button-2 (Top button on the side with screen): Long tap for 5 seconds to turn off the dash cam.
  • Photo Button (Bottom button on the side with screen): Short tap to take a quick photo.
  • Restore Factory Settings: Long tap the Photo button for 8 seconds to restore the machine's factory settings.

5.2 WiFi Connect & App Control (GoLook App)

The dash cam features built-in WiFi for seamless control and management via your smartphone.

Image showing a smartphone screen with the GoLook app interface, connected to the dash cam via WiFi, with options to download from App Store or Google Play.

Image: Built-in WiFi & Free APP Control

  1. Download the App: Download the "GoLook" app from the App Store (iOS) or Google Play (Android), or scan the QR code provided in the manual.
  2. Connect via WiFi:
    • Ensure the dash cam is powered on.
    • On your smartphone, go to WiFi settings and connect to the dash cam's WiFi network. The WiFi SSID will be "Dashcam-****" and the default password is "12345678".
    • Note: After starting the dash camera, connect to WiFi within 5 minutes. If disconnected, press the Menu Button-1 for 3 seconds to restart WiFi.
  3. Access Features: Once connected, open the GoLook app. You can easily access settings, view live footage, download recordings, and share videos directly from your phone.
  4. App Permissions: Please agree to the app's requests for system privileges to ensure full functionality. No user's private information will be obtained.

5.3 App Settings Overview

Within the GoLook app, you can configure various settings:

  • Video Resolution: Front (4K/3840x2160), Rear (1080P/1920x1080).
  • Video Encoding: H264/H265 compatibility.
  • Format Card: Format the memory card when an error occurs.
  • Sound Recordings: Enable/Disable audio recording.
  • Video Duration: Set loop recording segments (1, 3, or 5 minutes). Emergency videos need to be manually deleted.
  • Emergency Recording Trigger: Adjust G-sensor sensitivity (Low, Middle, High) for crash detection.
  • Vibration Boot: Adjust sensitivity for triggering emergency recording when parked.
  • Time-lapse Video Recording: Set duration for parking monitoring (15 minutes, 12 hours, 24 hours - requires hardwire kit).
  • Vehicle Battery Protection: Set voltage cut-off (11.8V, 12V, 12.2V - requires hardwire kit).
  • Speaker Volume: Adjust dash cam sound volume (Off, Low, Middle, High).
  • Upside Down: Enable/Disable for rear camera if mounted inverted.
  • Mirror Left and Right: Optional mirror flip for the lens.
  • Modify Dash Cam: Change WiFi name and password.
  • Restore Factory Settings: Reset all settings to default.
  • About Dash Cam: View GoLook app information.

6. Specifications

FeatureSpecification
Front Video Resolution4K (3840x2160P) @30FPS
Rear Video Resolution (Optional)1080P (1920x1080P) @30FPS
Photo Resolution12M (1800Mega Pixels)
Video FormatTS
Image FormatJPG
Video EncodingH.265
Display1.47" IPS Screen (<3")
Screen Ratio4:3
Front Lens Angle170°
Rear Lens Angle (Optional)140°
Front Lens ApertureF1.6
Rear Lens Aperture (Optional)F2.0
Imaging SensorSony IMX335
Chipset ManufacturerNOVATEK
Memory Card SupportMicro SD/TF, Class 10 or above, 32GB to 512GB
Input/OutputType-C, AV-In, Wi-Fi
Power SourceCorded Electric (12V vehicle power)
BatteryBuilt-in Supercapacitor & Button Battery (for settings, not operation)
APP CompatibilityGoLook
Special FeaturesG-Sensor, Loop-Cycle Recording, Parking Monitor, NightShot Function, Wide Dynamic Range, Automatic White Balance, Real Time Surveillance, External GPS (optional)
Dimensions (W x H x D)9.5 x 3.2 x 3.1 cm (3.74 x 1.26 x 1.22 inches)
Weight89g
Working Temperature0°C (No specific range provided, assuming standard operating temperatures)
CertificationCE

7. Maintenance

  • Clean Lenses: Regularly clean the front and rear camera lenses with a soft, lint-free cloth to ensure clear recordings.
  • Format SD Card: Periodically format the Micro SD card (e.g., once a month) within the dash cam settings to maintain optimal performance and prevent data corruption.
  • Check Connections: Ensure all cables and connections are secure to prevent power interruptions or signal loss.
  • Firmware Updates: Check the GoLook app or the manufacturer's website for any available firmware updates to improve performance and add new features.

8. Troubleshooting (FAQ)

8.1 Camera won't turn on?

  • Solution 1: The dash cam should turn on automatically when the car's power is on. Check the power cord connection first.
  • Solution 2: If the power cord is connected but the camera still doesn't work, keep it charging for more than 20 minutes, then long-press the power button to try turning it on.

8.2 Blurry video?

  • Ensure you have removed the protective film from the camera lens.
  • Make sure the lens and your car's windshield are clean and free of dirt or grease.
  • If the problem persists, contact customer support.

8.3 Dash cam dead?

If the camera works properly but seems "dead" (e.g., not recording), it might be an SD card problem. Try changing to a new memory card.

8.4 The earliest video file is missing?

The dash cam has a loop recording function. When the SD card storage is full, it automatically deletes the earliest unlocked video clips. Regularly download and save important video content to your phone or computer. Locked videos are not automatically deleted.

8.5 Video locks up automatically too often?

The G-sensor sensitivity may be set too high, making it overly sensitive to vibrations. Connect your phone to the GoLook app and reduce or turn off the G-sensor sensitivity.

8.6 Memory card error ("SD error", "No SD card")?

  • We recommend using the complimentary 64G SD card if provided, or a high-quality Class 10 card.
  • Format the SD card within the dash cam. The dash cam will reboot, then check if the problem is solved.
  • Ensure you are using a compatible SD card that meets the standard. If not, replace it.
  • If the problem persists, contact customer support.

8.7 Dash cam adsorption is not firm?

  • Clean the windshield with a wipe before applying the static sticker.
  • Firmly affix the dash cam with the static sticker.
  • If it's still not firm, contact customer support.

8.8 Poor color of video or photo?

Ensure the "Setup Image/Video Frequency" option in the settings is set to 60Hz and the front camera resolution is 4K.

9. User Tips

  • Verify Accessories: Upon receiving your dash cam, check that all ordered optional accessories (rear camera, GPS module, hardwire kit, SD card) are included in the package.
  • Language Support: The GoLook app supports multiple languages. If you require a specific language like Portuguese, check the app settings.
  • GPS Data: For speed and location to appear in recordings, ensure the optional GPS module is connected and functioning correctly.
  • Parking Mode: The 24-hour parking monitoring function requires the optional hardwire kit to be installed. Understand its operation for continuous surveillance.
  • Remote Viewing: The WiFi connection is primarily for local app control and managing recordings on your phone. It does not support remote viewing from home over the internet.
  • Operational Indicator: A green light bulb typically indicates that the dash cam is working.
  • Optimal Color: If video or photo colors appear poor, check the "Setup Image/Video Frequency" setting in the app and ensure it is set to 60Hz.

10. Warranty and Support

The Aprilboy K888 Dash Cam comes with a 1-year warranty.

If you encounter any problems such as damage or loss of accessories during use, please contact us immediately. We are committed to providing you with the best service.

After-Sales Services Email: QOZ-Aprilboy@outlook.com


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.