MN MODEL MN82 Pro / MN82S LC79

Contents

MN82 Pro / MN82S LC79 1:12 Scale RC Off-Road Car Instruction Manual

Model: MN82 Pro / MN82S LC79

1. Introduction

Thank you for choosing the MN82 Pro / MN82S LC79 1:12 Scale RC Off-Road Car. This remote-controlled vehicle is designed for enthusiasts seeking a realistic and durable off-road experience. Featuring full proportional control, a robust 4WD system, and detailed simulation, this model offers excellent performance on various terrains. Please read this manual thoroughly before operating the vehicle to ensure safe and optimal performance.

2. Safety Information

  • WARNING: Not suitable for children under 36 months due to small parts.
  • Always operate the RC car in open areas, away from people, pets, and obstacles.
  • Do not operate near water or in wet conditions unless explicitly stated as waterproof.
  • Keep fingers, hair, and loose clothing away from moving parts such as wheels and gears.
  • Ensure batteries are charged correctly and handled with care. Do not short-circuit or puncture batteries.
  • Adult supervision is recommended for younger users.
  • Turn off the vehicle and remote control when not in use.

3. What's in the Box

The package typically includes the following components:

  • 1 x MN82 Pro / MN82S LC79 RC Car
  • 1 x 2.4G Remote Control
  • 1 x USB Charger
  • 1 or 2 x 7.4V Lithium Battery (Capacity may vary by version: 500mAh or 1200mAh)

Note: Remote control requires 2 x 1.5V AA batteries (not included).

MN82S/MN82Pro LC79 models in black, silver, and red, with batteries, USB charger, and remote control.
Figure 3.1: Typical package contents for MN82S/MN82Pro LC79 models.

4. Specifications

Feature Detail
Model Number MN-82 LC79 RTR Version / MN-82S Climbing Car
Scale 1:12
Material ABS Plastic
Product Size (MN-82) 36 x 16 x 16 cm
Product Size (MN-82S) 36 x 15.5 x 15.5 cm
Wheelbase (MN-82S) ~21.3 cm
Motor 280 Strong Magnetic Motor
Servo 17g Waterproof Servo / 17g Bridge Mounted Servo
Body Battery 7.4V 500mAh Lithium Battery (MN-82) / 7.4V 1200mAh Lithium Battery (MN-82S)
Remote Control Battery 2 x 1.5V AA (not included)
Charging Method USB Charging Cable
Charging Time Approximately 3 hours
Play Time Approximately 30-40 minutes
Remote Control Distance Approximately 100 meters
Max Climb Angle (MN-82S) Approximately 46 degrees
Suspension Front Plastic Link / Rear Steel Plate
Main Beam Integral Injection Molded Frame
Tire Specifications Diameter: 62mm, Width: 24mm, Wheel Hub Diameter: 37mm, Adapter: 5mm
Lighting (MN-82) Headlights
Lighting (MN-82S) Controllable headlights, taillights, front and rear turn signals, front and rear dual flashing lights, brake lights, reverse lights
Dimensions of the MN82 model: 15.5cm width, 36cm length, 15.5cm height.
Figure 4.1: MN82 model dimensions.
Chassis view showing front four-link straight axle, rear simulated steel plate suspension, simulated trapezoidal girder. Also details integrated control board, 280 strong magnetic motor, 17G waterproof steering gear, and 7.4V 1200mAh lithium battery.
Figure 4.2: Chassis and internal components overview.
Image detailing wear-resistant and slip-resistant all-terrain tires. Tire specifications: Diameter 62mm, Width 24mm, Wheel hub diameter 37mm, Adapter 5mm.
Figure 4.3: Tire specifications.

5. Setup Guide

5.1. Charging the Vehicle Battery

  1. Connect the 7.4V Lithium Battery to the included USB Charger.
  2. Plug the USB Charger into a suitable USB power source (e.g., computer, USB wall adapter).
  3. During charging, the red light on the charger will be on, and the green light will flash.
  4. Once fully charged (approximately 3 hours), both red and green lights on the charger will be on.
  5. Disconnect the battery from the charger once charging is complete.
Image showing the MN82 battery compartment, 7.4V 500mAh battery, and USB balance charger with overcharge protection. Charging status: Red light on, green light flashing. Full power: Red and green lights on. Charging time: 3 hours. Battery life: 30-40 minutes.
Figure 5.1: Battery installation and charging instructions.

5.2. Installing Vehicle Battery

  1. Open the battery compartment on the vehicle. This is typically located under the hood or chassis, as shown in Figure 5.1.
  2. Carefully insert the charged 7.4V Lithium Battery into the compartment.
  3. Connect the battery connector to the vehicle's power port.
  4. Close the battery compartment securely.

5.3. Installing Remote Control Batteries

  1. Open the battery cover on the back of the remote control.
  2. Insert 2 x 1.5V AA batteries, ensuring correct polarity (+/-).
  3. Close the battery cover.

6. Operating Instructions

6.1. Powering On and Pairing

  1. Turn on the power switch on the RC car.
  2. Turn on the power switch on the remote control. The remote control light will indicate pairing status.
  3. The remote control and car should automatically pair. If not, turn both off and on again.

6.2. Basic Driving Controls

Remote control diagram with labels: Remote control light, Steering fine-tuning, Speed adjustment, Lamp control, Power switch, Proportional direction, Proportional throttle.
Figure 6.1: Remote control layout and functions.
  • Proportional Throttle: Use the trigger on the remote control to control forward and backward movement. Pull the trigger to accelerate forward, push it to brake or reverse. The further you pull/push, the faster the car moves.
  • Proportional Steering: Use the steering wheel on the remote control to turn left or right. The amount you turn the wheel corresponds to the steering angle of the car.
  • Speed Adjustment: Use the speed adjustment dial/button on the remote to fine-tune the maximum speed.
  • Steering Fine-tuning: Use the steering fine-tuning knob to adjust the steering trim, ensuring the car drives straight when the steering wheel is centered.

6.3. Lighting Control (MN-82S Version)

The MN-82S version features a comprehensive linkage light group. Use the 'Lamp control' button/switch on the remote control to manage the lights.

  • Controllable Headlights: Turn on/off the front headlights.
  • Taillights: Rear lights for visibility.
  • Front and Rear Turn Signals: Indicate turns.
  • Front and Rear Dual Flashing Lights: For hazard warning or special effects.
  • Brake Lights: Illuminate when braking.
  • Reverse Lights: Illuminate when reversing.
Image showing the MN82 Pro vehicle lamp group with controllable/linked lights: central controllable headlight, tail light, front and rear turn signals, front and rear dual flashing lights, brake light, reverse light.
Figure 6.2: MN-82S Vehicle Lamp Group.

6.4. DIY Disassembly Feature

The rear compartment of the vehicle can be disassembled and replaced, allowing for customization such as trailer styling or adding a configurable fence.

DIY disassembly feature, showing the rear compartment removal and replacement with a trailer styling and configurable fence.
Figure 6.3: Rear compartment disassembly and customization.

7. Maintenance

  • Cleaning: After each use, especially off-road, gently clean the vehicle to remove dirt, dust, and debris. Use a soft brush or cloth. Avoid using water directly on electronic components.
  • Battery Care: Always fully charge the battery before storage if not used for an extended period. Store batteries in a cool, dry place. Do not leave batteries fully discharged for long periods.
  • Inspection: Regularly check for loose screws, damaged parts, or worn tires. Replace any damaged components promptly.
  • Lubrication: Periodically lubricate moving parts like gears and axles with RC-specific lubricant to ensure smooth operation and extend lifespan.

8. Troubleshooting

Problem Possible Cause Solution
Car does not respond to remote. Low battery in car or remote; Not paired; Power switch off. Charge car battery; Replace remote batteries; Ensure both power switches are ON; Re-pair by cycling power.
Car drives slowly or has short play time. Car battery low or not fully charged. Fully charge the car battery.
Car pulls to one side. Steering trim needs adjustment. Use the steering fine-tuning knob on the remote control to adjust.
Lights not working (MN-82S). Lamp control switch off; Wiring issue. Ensure lamp control is activated on the remote; Check for loose connections if problem persists.
Reduced range or interference. Environmental interference; Low remote battery. Move to an open area; Replace remote batteries.

9. User Tips

  • For optimal off-road performance, ensure tires are clean and free of debris to maintain maximum grip.
  • Experiment with the proportional throttle and steering to achieve precise control, especially on challenging terrains.
  • Consider purchasing additional batteries for extended play sessions.

10. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.