70mai Rear Camera RC13 HD Backup Cam User Manual

1. Product Overview

The 70mai RC13 HD Backup Cam is a high-definition rear camera designed to enhance your driving safety by providing a clear view of the area behind your vehicle. It features night vision capabilities, a wide-angle lens, and IP67 waterproofing for reliable performance in various conditions. This camera is specifically compatible with 70mai S500 and S410 dash cams.

Compatibility Note:

This rear camera is ONLY compatible with 70mai S500 and S410 dash cams. It is NOT compatible with the D07 model. Please ensure your main dash cam is compatible before installation.

2. Package Contents

Please check the contents of your package upon receipt. The standard package includes:

• 70mai RC13 Night Vision Backup Camera (x1)
• Video Signal Wire (5.5M HDMI cable) (x1)
• Mounting Screws (x2)
• User Manual (x1)

Depending on the package option purchased, additional accessories such as a rear camera support, cleaning wipes, and a screwdriver may be included.

3. Setup and Installation

Follow these steps to properly install your 70mai RC13 Rear Camera:

1. Choose a Mounting Location:

   Select a suitable location on the rear of your vehicle, typically above the license plate or near the trunk handle, ensuring a clear and unobstructed view. The camera is designed for external mounting.

2. Prepare the Surface:

   Clean the chosen mounting surface thoroughly. If your package includes cleaning wipes (wet and dry), use them to ensure the surface is free from dirt, dust, and grease. A clean surface is crucial for secure adhesive attachment.

3. Attach the Mounting Bracket:

   Secure the camera to its mounting bracket using the provided screws. Then, peel off the protective film from the adhesive pad on the bracket and firmly press it onto the prepared surface. Hold for a few seconds to ensure strong adhesion.

   

4. Connect the Video Signal Wire:

   Route the 5.5M HDMI video signal wire from the rear camera to your compatible 70mai S500 or S410 dash cam. Ensure the cable is securely connected to both the rear camera and the main dash cam unit. Conceal the cable neatly to avoid interference with vehicle operation.

4. Operating Instructions

Once installed and connected to a compatible 70mai dash cam, the RC13 camera operates in conjunction with the main unit to provide enhanced rear visibility.

Real-time Reversing View:

When you shift your vehicle into reverse, the connected dash cam will automatically display a real-time view from the RC13 rear camera. This view includes dynamic parking assist lines to help you maneuver safely into parking spaces. These assist lines can often be tailored via the main dash cam's settings to fit various vehicle types and installation positions.

Wide-Angle Coverage:

The RC13 features a 138° wide-angle lens, providing extensive coverage of the road behind you. This wide field of view helps monitor up to 3 lanes of traffic, enhancing situational awareness. The camera also incorporates glare suppression technology to maintain clear image quality even in challenging lighting conditions.

Night Vision:

Equipped with NightShot Function, the RC13 camera delivers clear images even in low-light conditions, ensuring visibility during nighttime reversing or driving.

5. Maintenance

To ensure the longevity and optimal performance of your 70mai RC13 Rear Camera, follow these simple maintenance guidelines:

• Cleaning the Lens:

  Regularly clean the camera lens with a soft, lint-free cloth. For stubborn dirt or smudges, use a mild lens cleaning solution. Avoid abrasive materials or harsh chemicals that could scratch the lens.

• Checking Connections:

  Periodically inspect the video signal wire connection to ensure it is secure and free from damage. Loose connections can lead to intermittent video signals.

• Adhesive Check:

  If the camera is mounted using adhesive, occasionally check the adhesion to ensure it remains firmly attached to the vehicle. Reapply or reinforce if necessary.

• Waterproofing:

  The camera is IP67 waterproof, meaning it is protected against dust and temporary immersion in water. However, avoid high-pressure water jets directly on the camera, which could compromise the seal over time.

6. Troubleshooting

If you encounter issues with your 70mai RC13 Rear Camera, try the following basic troubleshooting steps:

• No Image on Dash Cam:

  • Ensure the video signal wire is securely connected to both the RC13 camera and the main 70mai dash cam.
  • Verify that the main dash cam is powered on and functioning correctly.
  • Check the compatibility of your dash cam (must be S500 or S410).

• Flickering or Distorted Image:

  • Check the video signal cable for any damage or kinks.
  • Ensure the connections are tight.
  • Clean the camera lens as described in the Maintenance section.

• Parking Assist Lines Incorrect:

  • Refer to your main 70mai dash cam's user manual for instructions on calibrating or adjusting parking assist lines.

If these steps do not resolve the issue, please contact customer support for further assistance.

7. Specifications

8. User Tips

• Flexible Mounting:

  While often mounted near the license plate, the camera's compact design and adjustable bracket allow for flexible placement. Ensure the chosen spot provides the best possible view and is securely attached.

• Cable Management:

  Take time to properly route and conceal the 5.5M video cable. This not only improves aesthetics but also prevents potential damage or interference with vehicle components.

• Check Compatibility:

  Always double-check that your main dash cam is a 70mai S500 or S410 model to ensure full functionality and avoid compatibility issues.

9. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please refer to the official 70mai website or contact the seller directly. Keep your purchase receipt as proof of purchase for warranty claims.