Blackview Tab 60 / Tab 60 Kids LCD Display and Touch Screen Assembly User Manual

1. Introduction

This manual provides detailed instructions for the installation, maintenance, and troubleshooting of your new Blackview Tab 60 or Tab 60 Kids LCD Display and Touch Screen Assembly. This product is designed as a direct replacement part to restore the display functionality of your tablet. Please read this manual carefully before proceeding with any installation to ensure proper handling and operation.

2. Product Overview

The Blackview Tab 60 / Tab 60 Kids LCD Display and Touch Screen Assembly is a complete unit comprising the liquid crystal display (LCD) and the touch-sensitive digitizer. It is available in variants with or without a pre-attached frame, offering flexibility for repair needs. This assembly is crucial for visual output and touch input on your Blackview tablet.

3. Package Contents

Your package should contain the following items:

• 1x Blackview Tab 60 / Tab 60 Kids LCD Display and Touch Screen Assembly (with or without frame, depending on your order)
• 1x Set of basic repair tools (may include screwdrivers, prying tools, suction cup, adhesive tape)

Please inspect all items upon receipt for any damage or missing components. Contact your seller immediately if there are any issues.

4. Specifications

5. Installation Guide

Replacing a tablet screen requires precision and care. If you are not confident in your ability to perform this repair, it is recommended to seek professional assistance.

5.1. Safety Precautions

• Always power off your tablet completely before starting the repair.
• Disconnect the battery connector as soon as possible after opening the device.
• Wear anti-static gloves or use an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.
• Work in a clean, well-lit, and organized environment.
• Handle all components, especially the new display assembly, with extreme care to avoid damage.
• Keep track of all screws and small parts, noting their original locations.

5.2. Tools Required

• Included repair tools (screwdrivers, prying tools, suction cup, adhesive tape).
• Heat gun or hairdryer (to soften adhesive).
• Plastic cards or guitar picks (for prying).
• Tweezers (for small connectors).

5.3. Preparation

1. Back up your data: Ensure all important data on your tablet is backed up before starting the repair.
2. Power off: Completely power off your Blackview Tab 60 / Tab 60 Kids tablet.
3. Discharge battery: If possible, discharge the tablet's battery below 25% to reduce the risk of fire if accidentally punctured during repair.

5.4. Disassembly (General Steps)

1. Heat the edges: Use a heat gun or hairdryer to gently heat the edges of the tablet's screen to soften the adhesive.
2. Pry open: Carefully use a suction cup to lift the screen slightly, then insert a thin prying tool or plastic card into the gap. Slowly work your way around the edges to separate the old screen assembly from the tablet frame.
3. Disconnect cables: Once the screen is partially separated, carefully disconnect the flex cables (LCD and digitizer) from the tablet's motherboard. Be gentle to avoid tearing the cables or damaging the connectors.
4. Remove old screen: Completely remove the old, damaged screen assembly.
5. Clean frame: Thoroughly clean any remaining adhesive from the tablet frame. This is crucial for a secure fit of the new screen.

5.5. Installation of New Display Assembly

1. Test before final installation: Before applying any adhesive, connect the new display assembly's flex cables to the motherboard. Power on the tablet to test the display and touch functionality. Ensure there are no dead pixels, lines, or unresponsive touch areas. Power off the tablet after testing.
2. Apply adhesive: Apply new adhesive tape or glue around the tablet frame where the screen will sit. If your new assembly came with a frame, you might skip this step or apply adhesive to secure the new frame to the tablet's main body.
3. Connect cables: Carefully connect the flex cables of the new display assembly to the corresponding connectors on the motherboard.
4. Position and secure: Align the new display assembly with the tablet frame and gently press it into place. Ensure it sits flush and evenly.
5. Reassemble: Reassemble any other components that were removed during disassembly.

5.6. Post-Installation Check

After reassembly, power on your tablet and perform a comprehensive test:

• Check for display clarity, brightness, and color accuracy.
• Test touch functionality across the entire screen.
• Ensure all buttons and cameras are functioning correctly.

6. Maintenance

• Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen cleaner specifically designed for electronics. Avoid harsh chemicals or abrasive materials.
• Protection: Consider using a screen protector and a protective case to prevent future damage.
• Handling: Avoid dropping the tablet or applying excessive pressure to the screen.

7. Troubleshooting

7.1. Common Issues

• Screen not turning on: Double-check all flex cable connections. Ensure the battery is charged.
• Touch not responding: Re-seat the digitizer flex cable. Ensure no debris is obstructing the connection.
• Display lines or dead pixels: This may indicate a faulty display. Re-check connections or contact the seller.

7.2. Backlight Issue After Installation

Important Note: If you encounter a backlight issue (screen displays but is very dim or dark) immediately after installation, do NOT initiate a dispute. This is a known issue that can often be resolved with a software update.

Solution: Please contact the seller directly. They will provide you with the necessary update software and instructions. Following these instructions once should resolve the backlight issue and allow your screen to display and function normally.

8. User Tips

• Verify Compatibility: Before purchasing, always confirm the exact model number of your Blackview tablet to ensure you order the correct replacement screen assembly. While this product is for Tab 60 and Tab 60 Kids, specific revisions might exist.
• Screen Size: The display size for these models is generally between 7-10 inches. If you are unsure, measure your existing screen or check your tablet's specifications to confirm.
• Pre-test is Key: Always perform a full test of the new screen assembly by connecting it to the motherboard before fully adhering it to the tablet frame. This allows you to identify any defects or compatibility issues without damaging the new part or your tablet.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where you made your purchase. Provide your order number and a detailed description of the issue to facilitate a quicker resolution.